1. Introduction
1.1 Preface
Thank you for choosing this Intelligent Car Information System. It is a comprehensive system of navigation and entertainment, also known as the Car-Machine Interconnection System. This system allows the car owner to connect their mobile phone for navigation and voice recognition. When parking, the USB can be used to listen to music or watch videos. While driving, the phone function can be used directly for navigation and music, eliminating the need to hold the mobile phone for calls, ensuring safety and convenience. The illustrations in this manual are for reference only. For detailed information, please refer to the actual system.
1.2 Safety Precautions
Please note that operating the machine while driving is not permitted, in order to comply with driving safety rules and traffic laws. This machine is an electronic product; please observe the safety precautions of ordinary electronic machines. This machine is powered by a 12V-24V 5A vehicle power supply. Do not install the machine with a substandard power supply to avoid damage. Do not disassemble or reassemble the unit without permission; this should only be carried out by professional maintenance personnel. Do not modify or upgrade the system software without authorization. Do not touch the surface of the main unit with sharp or hard materials. Do not use in extreme environments; the normal operating temperature is -40°C to 70°C. Do not spill liquids or chemicals (such as water) on the machine. The company is not responsible for the loss or damage of personal data caused by incorrect user operation, product maintenance, replacement, or other unexpected circumstances, and is not responsible for other indirect losses caused thereby. The company retains ownership and final interpretation rights of the function manual, three-guarantee certificate, warranty card, and other related materials.
2. Function Introduction
Image: Overview of the Wireless CPAA Module, showing CarPlay and Android Auto logos and a Mercedes Benz interior with the system active.
Image: Diagram illustrating how to add CarPlay & Android Auto while keeping the factory car screen, by long pressing the back button on the car knob to switch between OEM and new systems.
Apple CarPlay
The iPhone's built-in car infotainment system, in conjunction with the central console knob, enables voice control for phone calls, messages, navigation, and music. It also supports Siri voice interaction to obtain more information. It supports both wireless and wired connections to CarPlay.
Android Auto
The original ecological Android car-machine interaction system developed by Google, with built-in voice control for phone, information, navigation, and music.
Intelligent Voice Control
Image: Demonstrates intelligent voice control for both Apple CarPlay (Siri) and Android Auto (Google Assistant), allowing hands-free operation for safer driving and more sensitive voice recognition.
Enjoy intelligent voice control without hands-on operation for safer driving. The system features sensitive and extensive voice recognition for both Apple CarPlay (Siri) and Android Auto (Google Assistant), allowing you to make calls, play music, and manage messages.
Front/Rear/360 Input
The intelligent module supports video decoding and can be equipped with a front view camera, rear view camera (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view system.
Image: Shows an optional aftermarket rear view camera displaying parking lines on the car's screen, indicating support for enhanced parking assistance.
Bluetooth Audio Output
Image: Illustrates the three steps for Bluetooth Audio Output: 1. Pair the Car Bluetooth, 2. Connect the CarPlay, and 3. Sound Output, showing how to select MB Bluetooth for audio.
Audio output from the factory car Bluetooth significantly reduces interference and makes the sound response faster. Ensure your car's Bluetooth is paired and connected to CarPlay for optimal audio performance.
Dual System Switch
Image: Depicts the dual system switch functionality, allowing a one-key switch between the original car system and the CarPlay/Android Auto interface.
The system allows you to keep all the functions of the original car and switch between the dual systems with a one-key operation.
3. Applicable System and Car Models
This retrofit kit is compatible with Mercedes-Benz NTG 4.5/4.7 systems. Please refer to the table below for specific car models and years.
Image: Table showing compatible Mercedes-Benz NTG 4.5/4.7 System models, years, and screen sizes.
| Car Model | Years | Screen Size |
|---|---|---|
| A Class W176 | 2013-2015 | 5.8 inch / 7 inch |
| B Class W242/W246 | 2012-2015 | |
| C Class W204 | 2011-2014 | |
| CLA Class C117/W117 | 2013-2015 | |
| CLS Class w218 | 2012-2015 | |
| E Class sedan W212 | 2012-2015 | |
| E Class coupe C207 A207 | 2012-2015 | |
| G Class W463 | 2012-2015 | |
| GLA Class X156 | 2013-2015 | |
| GLK Class | 2013-2015 | |
| ML/GL | 2012-2015 | |
| SLK R172 | 2011-2015 |
4. Installation Manual
The installation of this retrofit kit involves connecting the decoder box to the vehicle's existing wiring harness. Professional installation is recommended.
Image: Wiring diagram showing the connection of the ANYFAR decoder box to the factory LVDS harness and the car's head unit. This diagram illustrates the physical connections required for installation.
The diagram above illustrates the wiring connections. Ensure all connections are secure and correctly matched to the factory LVDS harness and the car's head unit.
5. Setup and Configuration
5.1 DIP Settings & Switch
The DIP switch settings must be configured according to your specific car model and screen size. Ensure the dial is set to "ON" for the selected configuration. After changing the DIP settings, you must reboot the decoder box for the changes to take effect.
| Car Model | Year | Screen Size | DIP Setting |
|---|---|---|---|
| A/B/C/E/CLA/CLS/GLA/GLK/SLK | 2011-2015 | 5.8 inch | 67/678 ON |
| G500 | 2012-2015 | 5.8 inch | 58 ON |
| E/M/C63 | 2012-2015 | 7 inch | 7/15 ON |
Note: Please ensure the dial is set to "ON". After changing DIP Settings, reboot the decoder box for the changes to take effect.
5.2 External Settings: Rear View Camera Input
This CarPlay interface supports aftermarket camera input for clear rear view imagery. If you are installing an aftermarket camera that supports reversing trajectory lines, uncheck the A1 box in the MCU Setup to display them. For aftermarket radar, uncheck the A2 box to enable it.
To access these settings:
- Click "Factory mode" -> "Advanced mode".
- Enter the password "888888".
- Go to "MCU Setup" and uncheck the "AO" option.
- Return to the previous level and click "Restart system" to successfully enable the reversing rear view function.
The front camera input configuration follows the same procedure.
5.3 External Settings: AUX Audio Output
If your car does not have Bluetooth audio function, you can use the AUX sound output. Follow these steps:
- Connect the AUX cable to the car and select AUX in the NTG system.
- In the decoder box settings, navigate to:
Settings > Factory Settings > Phone link Settings. - Disable "Phone link Audio" (set to ON).
- Go back and save the settings.
It is necessary to reboot the decoder box for these changes to take effect; otherwise, they will not be applied.
6. Operation
6.1 Button Control (Steering Wheel)
| Button | Operation | Function |
|---|---|---|
| Phone Call Button (Hook) | Long press | Switch OEM screen to interface screen OR switch interfaces to the OEM screen |
| Phone Call Button (Hook) | Short press | Hang up the phone |
| Phone Call Button (Answer) | Short press | Answer the phone |
| Volume Up (+) | Short press | Increase the volume |
| Volume Down (-) | Short press | Decrease the volume |
6.2 Button Control (Center Console)
| Button | Operation | Function |
|---|---|---|
| Back Button (Arrow) | Long press | Switch OEM screen to interface screen OR switch interfaces to the OEM screen |
| Rotary Knob | Swipe/Click | Control function |
| Hazard Light Button | Double Click | Switch OEM screen to interface screen OR switch interfaces to the OEM screen |
6.3 Wireless Connection (CarPlay & Android Auto)
The system uses wireless CarPlay and Android Auto, supporting audio and video separation. Before connecting, ensure your phone's Bluetooth and Wi-Fi are on, and the vehicle's audio system is set to Bluetooth music mode.
Connect Step for CarPlay:
- Turn on your phone's Bluetooth and Wi-Fi, and keep them on.
- Select the Bluetooth Device name as "CAR Audio XXXX" on your phone.
- Pair your phone.
- When a request window pops up, select "Use CarPlay".
Connect Step for Android Auto:
- Turn on your phone's Bluetooth and Wi-Fi, and keep them on.
- Select the Bluetooth Device name as "CAR Audio XXXX" on your phone.
- Pair your phone.
- After successful Bluetooth pairing, follow the on-screen instructions for the Android Auto connection process.
For audio source, ensure your iPhone's sound source is set to the original car radio (e.g., "MB Bluetooth").
7. Specifications
| Feature | Value |
|---|---|
| Operating Voltage | 9-16V, 14.4V (rated) |
| Storage Temperature | -30°C to +85°C |
| Operating Temperature | -30°C to +75°C |
| Ambient Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption Current | 1A (rated), 3A (Max) |
| Shutdown Current | Current: 300mA (Clock is on) |
| Quiescent Current | Less than 3mA |
| Charging Current | ≤2A. When USB charging current > 1A, the host machine activates circuit protection to control current within 15A and prevent product burning. |
8. Troubleshooting
8.1 Why does the Box's Bluetooth disconnect?
The wireless CarPlay system operates by establishing a Wi-Fi connection for data transmission after device information is confirmed via Bluetooth pairing. To avoid interference, the Bluetooth connection will then disconnect. This is a normal phenomenon and part of the system's design.
8.2 Cannot connect CarPlay, but Bluetooth is already paired.
If you are experiencing issues connecting CarPlay despite Bluetooth being paired, please try the following:
- Forget the device's Bluetooth connection on your iPhone.
- Reset Wi-Fi settings on your iPhone: Go to
Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings.
8.3 Why is the wireless CarPlay connection not stable?
If your wireless CarPlay connection is unstable, consider these solutions:
- Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this can impair Wi-Fi signal transmission.
- Switch the Wi-Fi channel within the CarPlay box settings: Go to
Factory Mode > Connectivity Settings > Hotspot Bandand select channel 1, 6, or 11, depending on your current region for optimal performance.
9. User Tips
- Always ensure your phone's operating system is up to date for the best compatibility and performance with CarPlay/Android Auto.
- For optimal audio quality, confirm your car's audio input is set to Bluetooth when using the wireless connection.
- If experiencing connectivity issues, try restarting both your phone and the car's infotainment system.
10. Support and Warranty
For any technical issues or support inquiries, please contact our technical support team:
Email: techsupport@anyfar.com
This product comes with a three-guarantee certificate and warranty card. Please refer to these documents for detailed warranty terms and conditions.
You can also find additional guides and documents, including a user manual in PDF format, by visiting the product page or the manufacturer's website: User manual (PDF)
For more information, visit www.anyfar.com.