1. Product Overview
The Grandnavi SC1668 is a 1-DIN car MP3 radio featuring a 2.2-inch TFT touch screen, Bluetooth connectivity, USB, SD, and AUX-IN ports, colorful lights, DSP sound processing, and voice assistant support. It is designed to modernize older vehicles with enhanced audio and connectivity features.


2. Specifications
General
- Voltage: DC 12V
- Screen Type: 2.2-inch TFT
- Screen Touch: Supported
- RGB Color: Seven colors backlight
- Power Output: 4 x 25W
- Work Temperature: -20℃ ~ 70℃
- Power Amplifier Chip: TDA7388
- Item Weight: 0.7kg
- Din Size: One Din
- Certification: CE, FCC
Audio & Media
- TF/Micro SD Slot: 1 (Supports up to 32GB)
- Digital Media Format: MP3, WMA, AAC, FLAC
- Picture Format: JPEG, BMP, GIF, PNG
- Audio Output: AUX-FL, AUX-RL, AUX-FR, AUX-RR (RCA Output)
- Special Features: MP3 players, Remote Controller Included, Bluetooth 5.0, Handsfree, USB, Type-C Charging, AUX-IN, FM, DSP, Voice Control, Time, 7 Color Backlight
Radio
- Radio Frequency: 87.5 ~ 108MHz (FM)
- Radio Area: Europe, North America, South America, Brazil
- Radio Chip: 8035
- Usable Sensitivity (FM): 10dBf
- 50dB Quieting Sensitivity (FM): 15dBf
- Stereo Separation @ 1KHz (FM): 30dB
- Frequency Response (FM): 100Hz-8KHz
- AM Tuning Range: 520KHz-1620KHz
- Usable Sensitivity (AM): 35dBf
- 20dB Quieting Sensitivity (AM): 40dBf
Display & Interface
- Display Size: 2.5"
- OSD Language: Chinese, English, Spanish, Portuguese, Russian, German, French, Polish, Turkish, Arabic, Hebrew, Italian, Dutch

3. Setup & Installation
This section provides instructions for the physical installation and initial power-up of your car MP3 radio.
3.1 Compatibility
The SC1668 is a 1-DIN unit designed to fit standard single-DIN car console openings. Please verify your car's console matches the typical 1-DIN slot before installation.

3.2 Wiring Instructions
Proper wiring is crucial for the safe and correct operation of your car radio. Refer to the diagram below and follow the steps carefully.


Power Connection
- First, connect the Yellow wire directly to the +12V battery power. Ensure no other device, such as a switch, is in between.
- Then, connect the Red wire to the ignition output.
- Connect the Black wire to the Ground terminal. If not found, connect it to the chassis instead.
CAUTION: Please make sure to connect the positive pole with the RED/YELLOW wire and the negative pole with the BLACK wire. Reverse connection of positive/negative poles may cause damage to the fuse. If so, replace with a new 10A fuse and then connect wires again.
Speaker Connection
This unit can mate with 4 speakers (4Ω). Make sure power is off before connecting.
CAUTION: Do not short speaker wires to chassis ground. It may cause severe damage.
Antenna Connection
Insert the coaxial connector to the antenna socket.
4. Operating Instructions
The SC1668 features a user-friendly interface with both physical buttons and a touch screen for control.
4.1 Front Panel Controls
The front panel includes various buttons and knobs for easy access to functions.

- Power ON/OFF & Mode Switch (SRC): Press to turn on/off. Short press to cycle through modes (Radio > USB > TF > BT Music > AUX).
- Volume Control (VOL): Rotate clockwise to increase, counter-clockwise to decrease volume.
- Seek/Track Buttons (◀◀/►►): In Radio mode, short press to search for stations. Long press for manual search. In playback mode, short press for previous/next track. Long press to fast-forward/rewind.
- Mute/Pause (►►): Short press to mute/pause.
- EQ: Repeatedly short press to cycle through EQ modes (USER > FLAT > ROCK > POP > CLASS > JAZZ).
- LOUD: Press and hold for three seconds to enable/disable Loudness.
- Voice Assistant: When connected via Bluetooth, press and hold the dedicated button to activate your phone's voice assistant (e.g., Siri).
- USB/SD/TF Card Slot: Insert USB drive or TF card for media playback.
- AUX-IN: Connect external audio devices via a 3.5mm jack.
- Type-C & USB Charging Ports: Use for charging mobile devices.
4.2 Remote Control
The included IR remote control provides convenient access to all functions.

4.3 Bluetooth Operation
Pair and connect your mobile device to enjoy music streaming and hands-free calling.
- Enable Bluetooth: On your mobile phone, enable Bluetooth.
- Search for Device: On your phone, search for Bluetooth devices and locate "Car-MiniTFT".
- Pair & Connect: Select "Car-MiniTFT" to pair. Upon successful connection, the Bluetooth icon on the radio display will light up.
- Music Streaming (A2DP): In BT music mode, music played on your phone will automatically stream to the car audio system. Use the ◀◀/►► buttons to control tracks.
- Hands-free Calling: When a call comes in, the number will display on the TFT screen. Press the phone button to answer/reject/end calls.
4.4 USB/SD Card Operations
The unit supports MP3/WMA/AAC/FLAC audio formats from USB drives and TF cards.
- Insert Media: Insert the USB drive into the USB port or the TF card into the TF card slot. The unit will automatically switch to USB/TF mode.
- Playback: Music will begin to play automatically. Use the ◀◀/►► buttons to navigate tracks.
- Eject Media: Gently push the USB drive or TF card to eject. The unit will automatically switch to radio mode.
WARNING: Always insert USB/TF media in the correct direction. Incorrect insertion can cause permanent damage. Do not hit or apply excessive force to the USB drive/device when it is plugged in, as this can damage the unit and the device.
4.5 FM Radio
Tune into your favorite radio stations.
- Access FM: Select "Radio" mode using the MODE/SRC button.
- Tune Stations: Use the ◀◀/►► buttons to search for stations.
- Radio Area: The radio reception area can be selected from Europe, North America, South America, and Brazil in the settings.
4.6 DSP Adjustment
Customize your audio experience with the Digital Sound Processor.
- Access DSP: Navigate to the DSP settings via the touch screen.
- Adjust Settings: Adjust EQ (Equalizer), Tone (Treble/Bass), and Speaker balance (R/L, F/R) to your preference.
4.7 Customization Features
- 7 Color Backlight: Set the button backlight to one of 7 colors or cycle automatically.
- 5 Themed Wallpapers: Easily switch between five themed wallpapers to personalize your display.
- Multiple Languages: The unit supports various OSD languages including English, Spanish, Portuguese, Russian, German, French, Polish, Turkish, Arabic, Hebrew, Italian, and Dutch.



5. Maintenance
To ensure the longevity and optimal performance of your Grandnavi SC1668 car radio, follow these general maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the unit's surface and screen. Avoid abrasive cleaners or solvents.
- Fuse Replacement: If the fuse blows, replace it only with a new fuse of the same rating (10A). Repeated blown fuses indicate a potential problem that requires professional inspection.
- Avoid Moisture: Keep the unit dry and away from excessive moisture.
- Temperature: Operate the unit within the specified work temperature range (-20℃ ~ 70℃).
6. Troubleshooting
If you encounter any issues with your car radio, refer to the table below for common problems and their solutions.
| Problem | Cause | Action |
|---|---|---|
| Unit will not turn on (no power) | Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Black wire not connected Fuse blown | Check connections for proper voltage (11-16VDC) Check connection to ground Replace fuse |
| Unit has power (but no sound) | Speaker wires not connected One or more speaker wires touching each other or touching chassis ground | Check connections at speakers Insulate all bare speaker wires from each other and chassis ground |
| Unit blows fuses | Yellow or red wire touching chassis ground Speaker wires touching chassis ground Incorrect fuse rating | Check for pinched wire Check for pinched wire Use fuse with correct rating |
| Excessive skipping | Unit is not mounted correctly or back strap is not secure | Check mounting sleeve and back strap support |
7. User Tips
- Bluetooth Connection: Ensure your phone's Bluetooth is discoverable when pairing. If you experience issues, try forgetting the device on your phone and re-pairing.
- Media Playback: For USB/SD card playback, ensure your media is formatted correctly (FAT12/FAT16/FAT32) and contains supported audio formats (MP3/WMA/AAC/FLAC).
- Voice Assistant: To use the voice assistant, make sure your phone is connected via Bluetooth and the voice assistant feature is enabled on your phone.
- Power Wiring: Double-check the positive and negative wiring connections to prevent fuse damage. Always replace a blown fuse with one of the correct amperage (10A).
8. Warranty & Support
For warranty information and technical support, please refer to the official Grandnavi website or contact your retailer. Keep your purchase receipt as proof of purchase.
A detailed user manual in PDF format is available for download: User Manual (PDF)