1. Introduction
Thank you for choosing the Smartbarry C006Pro 4G Children's Smart Watch. This device is designed to provide communication, safety, and entertainment features for children, offering peace of mind for parents. It features 4G all-network connectivity, dual front and rear cameras with 360° rotation, IP68 waterproofing, GPS/WIFI/LBS real-time positioning, video calling, and various activity tracking functions.

Figure 1: Smartbarry C006Pro Smart Watch Key Features
Video 1: Smartbarry C006Pro Product Demonstration. This video showcases the watch in various colors, its detachable design, charging process, SIM card installation, and call functionality.
2. Setup Guide
2.1 What's in the Box

Figure 2: Smart Watch Package Contents
- Smartbarry C006Pro Smart Watch
- Magnetic Charging Cable
- User Manual
- SIM Card Tray Tool (if applicable)
2.2 SIM Card Installation
The watch requires a Nano SIM card for full functionality (calls, data). Ensure the SIM card has caller display and data flow enabled (at least 50MB/month) and 4G/VoLTE functions activated by your mobile carrier.
- Prepare a Nano SIM card.
- For watches with a card tray: With the watch turned off, use the provided tool to eject the card tray. Insert the Nano SIM card into the tray in the correct orientation. Push the tray back into the slot until it clicks.
- For watches without a card tray: With the watch turned off, remove the card slot cover. Insert the Nano SIM card with the chip facing the screen.
Note:
- Do NOT poke the microphone hole next to the SIM card tray with a needle.
- Do NOT install or remove the SIM card when the watch is turned on.
- Do NOT insert the SIM card in reverse, as this may damage the watch.
2.3 Powering On/Off
- Power On: Press and hold the power button for 3 seconds.
- Power Off:
- Without SIM card: Press and hold the power button.
- With SIM card (via watch): Go to 'Settings' > 'Power off'.
- With SIM card (via APP): Use the 'Function' > 'Remote Power Off' feature in the companion app.
2.4 Battery Charging
Fully charge the watch before its first use. Use the magnetic charging cable provided:
- Attach the magnetic end of the cable to the charging contacts on the back of the watch (it will only connect one way).
- Connect the USB end of the cable to a USB charger (output DC 5V~1A).
Note:
- Do NOT use a charger with an output voltage exceeding 5V, as this will damage the device.
- Only use the magnetic charging cable that came with your watch. Other cables may cause damage.
2.5 App Download and Installation
The Smartbarry C006Pro uses a companion app for full functionality and parental control. You can download it using one of the following methods:
- Scan QR Code: Scan the QR code displayed in the watch's 'QR Code' menu or the one provided in the manual (if available) to download the app.
- Search App Store: Search for