1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your RMshebei Tuya WiFi Smart Circuit Breaker. This device offers advanced features such as remote control, energy metering, and various protection functions, integrating seamlessly with smart home ecosystems like Tuya Smart Life, Amazon Alexa, and Google Assistant.
For a comprehensive guide, you may also refer to the official user manual PDF: RMshebei WiFi/Zigbee Over-Under Voltage Protector Energy Meter User Manual (PDF).
2. Safety Information
WARNING: Installation and maintenance should only be performed by qualified electricians. Always disconnect power before working with electrical circuits to prevent electric shock or injury.
- Ensure the device is installed in a dry environment, away from moisture and direct sunlight.
- Verify that the rated voltage and current of the circuit breaker match your electrical system's requirements.
- Do not attempt to disassemble or modify the device.
- Ensure proper grounding according to local electrical codes.
3. Product Overview
3.1 Key Features
- ON/OFF & Timing: Remote control and scheduling.
- Automatic Reclosing: Automatically restores power after a trip.
- Metering (Prepaid function): Real-time energy consumption monitoring and prepaid functionality.
- Overcurrent Protection (Adjustable): Protects against excessive current.
- Remote Control: Manage the device from anywhere via the mobile app.
- Voice Control: Compatible with Amazon Alexa and Google Assistant.
- Over/Under Voltage Protection (Adjustable): Safeguards against voltage fluctuations.
- Reclosing Time/Times (Adjustable): Configurable reclosing parameters.
- Leakage Current Protection (Adjustable): Detects and protects against leakage current.
- Temperature Protection (Adjustable): Monitors and protects against overheating.
- Photovoltaic Bidirectional Metering: Views electricity input from photovoltaic power generation to the State Grid.
3.2 Component Identification
The circuit breaker features clear markings for power input (N, L) and load output (N, L). It includes a signal light for WiFi status and a switch light for ON/OFF status.
- WiFi Signal Light:
- Steady on: Successful connection.
- Blinking: Waiting for connection.
- Switch Light:
- Red: OFF.
- Green: ON.
3.3 Product Dimensions
4. Installation
4.1 Physical Installation
The circuit breaker is designed for installation on a standard 35MM guide rail.
- Mount the device securely onto the 35MM DIN rail in your electrical panel.
- Connect the Neutral (N) and Live (L) power input wires to the terminals marked 'N Power L' at the top of the device.
- Connect the Neutral (N) and Live (L) load output wires to the terminals marked 'N Load L' at the bottom of the device.
- Ensure all connections are tight and secure.
- The device includes an external Current Transformer (CT) for current measurement. Connect the CT to the designated terminals, ensuring correct polarity if specified.
4.2 App Download and Device Pairing
The RMshebei Smart Circuit Breaker works with the Tuya Smart or Smart Life app.
- Download the App: Use your smartphone to scan the QR codes below, or search for "Smart Life" or "Tuya Smart" in the Google Play Store or Apple App Store to download and install the app.
- Create Account: Open the app and create an account using your mobile number or email address.
- Connect to Wi-Fi: Ensure your mobile phone is connected to a 2.4 GHz Wi-Fi network. (5 GHz networks are not supported for initial pairing).
- Add Device:
- In the app, click the "+" icon in the upper right corner of the homepage, or select "Add Device".
- Navigate to the "Energy" category and select "Switch module (Wi-Fi)".
- Pairing Mode: Long press the Wi-Fi button on the circuit breaker for 5 seconds until the WiFi signal light starts blinking rapidly.
- Follow the on-screen instructions in the app to complete the pairing process. You may need to confirm your Wi-Fi network and enter its password.
5. Operation
Once successfully paired, you can control and monitor your circuit breaker remotely via the app.
5.1 Remote Control and Monitoring
The app allows you to view real-time data and control the device from anywhere.
- ON/OFF Control: Toggle the circuit breaker on or off directly from the app.
- Energy Metering: View current, power, voltage, leakage current, and total forward energy consumption (kWh) in real-time. The app also records electricity consumption over different time periods (year, month, day, hour).
- Prepaid Function: If enabled, the app can manage prepaid electricity usage.
- Photovoltaic Bidirectional Metering: Monitor electricity input from solar power generation to the grid.
5.2 Timing Functions
Set schedules for automatic ON/OFF operations:
- Timing Mode: Set specific times for the breaker to turn on or off.
- Countdown Mode: Set a countdown timer for the breaker to switch state.
- Cycle Timing: Program repetitive ON/OFF cycles.
- Jog Switch: Momentary ON/OFF control.
- Up to 30 sets of timing settings can be configured.
5.3 Protection Settings (Adjustable via App)
Configure various protection parameters to safeguard your electrical system:
- Under Voltage Protection: Adjustable range 80V-210V (default: 175V).
- Over Voltage Protection: Adjustable range 120V-300V (default: 275V).
- Overcurrent Protection: Adjustable range 1.0A-63A (accuracy 0.1A, default: 63A).
- Leakage Current Protection: Adjustable range 10-99mA (default: 50mA). This function can be turned off.
- Over Temperature Protection: Adjustable range 10-85°C.
- Reclosing Time: Adjustable reconnection delay from 10s-99s (default: 10s).
- Reclosing Times: Adjustable overcurrent and leakage protection time from 1-30 (default: 5). This function can be turned off.
- Overcurrent Delay: Adjustable delay time from 1s-15s (default: 1s).
- Loss of Current Delay: Adjustable delay time from 1s-15s (default: 1s).
5.4 Voice Control
Integrate with Amazon Alexa or Google Assistant for convenient voice commands to control your circuit breaker.
5.5 Smart Scenarios (Devices-Interlock Mode)
Connect your smart circuit breaker with other smart home devices to create automated scenarios. This allows for intelligent monitoring and control of all home equipment, enhancing smart living.
6. Maintenance
- Regularly check the device for any visible damage or loose connections.
- Keep the device clean and free from dust.
- Ensure the app is updated to the latest version for optimal performance and security.
- Periodically test the protection functions (e.g., by simulating an overcurrent condition if safely possible) to ensure they are working correctly.
7. Troubleshooting
- Device not connecting to Wi-Fi:
- Ensure your Wi-Fi network is 2.4 GHz.
- Check if the Wi-Fi signal light is blinking rapidly during pairing. If not, long-press the Wi-Fi button for 5 seconds to enter pairing mode.
- Verify your Wi-Fi password is correct.
- Move the device closer to your Wi-Fi router.
- Device not responding to app commands:
- Check your internet connection and the device's Wi-Fi status.
- Restart the app and try again.
- If the issue persists, try re-pairing the device with the app.
- Circuit breaker trips unexpectedly:
- Check the app for fault records (overcurrent, over/under voltage, leakage, temperature).
- Inspect connected appliances for faults or overloads.
- Ensure protection settings in the app are configured appropriately for your load.
8. Specifications
| Parameter | Value |
|---|---|
| Brand Name | RMshebei |
| Model Number | RMDZT-1PNL 63A JLS |
| Type | Mini Circuit breaker |
| Poles Number | 1P+N |
| Rated Current | 63A |
| Rated Voltage | AC110/230V (220V) |
| Operating Voltage | AC80V-300V (single phase) |
| Working Frequency | 50/60Hz |
| Is Smart Device | Yes |
| Installation | 35MM guide rail |
| Electrical Life | 105 |
| Mechanical Life | 105 |
| Protection Level | IP20 |
| Pollution Level | 3 |
| Altitude | <2000m |
| Working Humidity | ≤50% at 40°C (no condensation) |
| Error | 1% |
| >U and <U Trip Delays | 0.5s |
| Reset/Start Delay | 10s-99s |
| Voltage Measurement Accuracy | 1% (not exceeding 1% of the total range) |
| Rated Insulation Voltage | 400V |
| Output Contact | 1NO |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
9. User Tips
- External Current Transformer (CT): This model utilizes an external current transformer for measurement. Ensure it is correctly installed and connected. The device may not function correctly without the CT.
- Current Rating: While rated for 63A, consider the long-term load capacity. For continuous high loads, ensure all wiring and connections, especially the contact screws, are robust enough to prevent overheating.
- App Interface: The app interface is generally standard for Tuya-compatible devices and should be intuitive to navigate.
10. Support & Certifications
For technical support or inquiries, please contact the manufacturer:
Yueqing Wentong Electronic Technology Co., Ltd.No.3 Baite Road, Xiangyang Industrial Zone,
Leqing City, Wenzhou City Zhejiang Province
Phone: 086 13587787770
Email: wtdzcn@163.com
Website: www.rmshebei.com
This product is certified with CE, FCC, and RoHS, ensuring compliance with relevant safety and environmental standards.