Universal Bluetooth Selfie Stick Tripod with LED Light User Manual

1. Introduction

Thank you for purchasing the Universal Bluetooth Selfie Stick Tripod with LED Light. This versatile device combines a selfie stick, a stable tripod, and an integrated LED fill light, making it perfect for capturing photos, videos, live streaming, and video calls. It features a detachable Bluetooth remote control for convenient operation and is compatible with most smartphones, digital cameras, and action cameras like GoPro.

2. Package Contents

Please check the package for the following items:

• 1 x Bluetooth Selfie Stick Tripod with LED Light
• 1 x Detachable Bluetooth Remote Control
• (Battery for remote control may or may not be pre-installed or included, check packaging)

Note: Smartphone, digital camera, or GoPro are not included.

3. Product Overview and Components

Familiarize yourself with the main parts of your selfie stick tripod:

Figure 1: Integrated Design Components

• A. Phone Holder/Mount: Securely holds your smartphone.
• B. LED Fill Light: Provides illumination for photos and videos.
• C. Extendable Tube: Stainless steel rod for adjustable length.
• D. Main Body/Handle: Houses the tripod legs and remote control slot.
• E. Detachable Bluetooth Remote Control: For wireless photo/video capture.
• F. Tripod Legs: Foldable legs for stable tabletop or ground use.

4. Setup Guide

4.1. Remote Control Battery Installation (if applicable)

The remote control typically uses a button cell battery (e.g., CR1632). If the remote is not working, you may need to install or replace the battery.

1. Locate the battery compartment on the side or back of the detachable remote control.
2. Use a small coin or your fingernail to open the battery cover.
3. Insert the button cell battery with the positive (+) side facing up.
4. Close the battery cover securely.

Figure 2: Detachable Remote Control

4.2. Bluetooth Pairing

To use the remote control, you must pair it with your smartphone:

1. Ensure the remote control has a working battery.
2. Press and hold the button on the remote control for 3-5 seconds until a blue indicator light starts flashing, indicating it's in pairing mode.
3. On your smartphone, go to Settings > Bluetooth.
4. Turn on Bluetooth and search for available devices.
5. Select "SelfieCom" or a similar name (e.g., "AB Shutter3") from the list of devices.
6. Once paired, the indicator light on the remote will stop flashing and remain solid blue (or turn off).
7. Open your phone's camera app. You can now use the remote control to take photos or start/stop video recording.

Note: The remote control has an effective range of up to 10 meters (33 feet).

4.3. Mounting Your Device

1. For Smartphones: Gently pull open the phone holder clamps. Insert your smartphone, ensuring it is securely gripped by the silicon pads. The holder can rotate to accommodate horizontal or vertical orientation.
2. For Digital Cameras/GoPro: The phone holder may be removable to reveal a standard 1/4-inch screw mount. Attach your digital camera or GoPro housing to this screw mount and tighten securely.

Figure 3: Device Compatibility

5. Operating Instructions

5.1. Selfie Stick Mode

1. Ensure your phone is securely mounted.
2. Hold the main body/handle firmly.
3. Extend the stainless steel tube to your desired length (up to 680mm / 28 inches).
4. Adjust the angle of your phone holder for the perfect shot.
5. Use the detachable Bluetooth remote control to capture photos or start/stop videos.

5.2. Tripod Mode

1. From the folded position, gently pull the bottom part of the handle downwards to unfold the tripod legs.
2. Spread the legs fully until they form a stable base.
3. Place the tripod on a flat, stable surface.
4. Extend the tube to your desired height.
5. Adjust the phone holder angle.
6. Use the Bluetooth remote for hands-free operation.

Figure 4: Stable Tripod Base

5.3. LED Fill Light Operation

The integrated LED light helps illuminate your subject in low-light conditions.

1. Locate the power button for the LED light (usually on the side or back of the light unit).
2. Press the button once to turn on the light at its first brightness level.
3. Press again to switch to the second brightness level.
4. Press a third time to turn off the LED light.

Figure 5: LED Light Dimming Modes

6. Maintenance and Care

• Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the selfie stick tripod in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery: If not using the remote control for an extended period, consider removing the battery to prevent leakage.
• Avoid Water: This device is not waterproof. Avoid exposure to water or high humidity.

7. Troubleshooting

8. Specifications

Figure 6: Product Dimensions

9. User Tips

• Phone Case Compatibility: If your smartphone has a thick or rugged protective case, you may need to remove it for a secure fit in the phone holder.
• Tripod Stability: For optimal stability when using the device as a tripod, especially with heavier phones or cameras, avoid fully extending the telescopic rod. Keep the extension shorter (e.g., under 30 cm) for best results.
• Remote Battery Life: To conserve battery life of the remote, turn it off when not in use by pressing and holding the button until the indicator light turns off.

10. Warranty and Support

For detailed warranty information, technical support, or further assistance, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format may be available from the seller or product page for additional details.

(Reference: User manual PDF link: https://manuals.plus/m/5e6bd13f094fb85d871fa106a7637177c737b73e35ac34771f0aaaaebfea28d1)