diymore ESP32-S3-RS485-CAN

Contents

ESP32-S3-RS485-CAN Industrial Control Board User Manual

Model: ESP32-S3-RS485-CAN

Brand: diymore

1. Introduction

The ESP32-S3-RS485-CAN Industrial Control Board is a versatile module designed for industrial applications, integrating Wi-Fi, Bluetooth 5 (LE), RS485, and CAN communication interfaces. Based on the powerful ESP32-S3 microcontroller, it offers robust AI computing capabilities and reliable wireless connectivity. This manual provides essential information for setting up, operating, and maintaining your device.

Video 1: Overview of the ESP32-S3-RS485-CAN Industrial Control Board.

Key Features:

  • Based on ESP32-S3, dual-core 240MHz processor with AI computing power.
  • Supports Wi-Fi and Bluetooth 5 (LE) for stable wireless connections.
  • Isolated RS485/CAN interfaces for enhanced industrial communication safety.
  • On-board RS485 and CAN indicator lights for operational status monitoring.
  • Rail-type protective shell design for easy installation and robust protection.
  • On-board USB Type-C interface for power supply, communication, and firmware download.
  • Wide voltage input range (7V~36V) for industrial power supply.

2. Package Contents

Please check the package for the following items:

  • ESP32-S3-RS485-CAN Industrial Control Board x 1
  • SH1.0 4PIN connection wire (approx. 150mm) x 1
  • Screwdriver x 1
ESP32-S3-RS485-CAN board with included accessories

Figure 1: ESP32-S3-RS485-CAN board with included accessories.

3. Hardware Overview

3.1. Component Layout

Internal PCB layout of ESP32-S3-RS485-CAN

Figure 2: Internal PCB layout of the ESP32-S3-RS485-CAN board.

3.2. Pin Descriptions

The board features various terminals and connectors for power, communication, and expansion:

No.ComponentDescription
1ESP32-S3Microcontroller (default ESP32-S3R8 chip)
2DC-DC Power ModuleProvides 3.3V 2A output
3Pin Header Interface (2.0mm pitch)For connecting to other functional modules
4Power Terminal Block7V to 36V DC input
5USB Type-C PortPower, firmware download, USB communication
6RTC Battery ConnectorFor rechargeable RTC battery (SH1.0)
7Surface-mount Ceramic AntennaOn-board antenna for Wi-Fi/Bluetooth
8IPEX Gen1 SocketFor external antenna (requires desoldering)
916MB FlashStorage for firmware and data
10Digital IsolationPrevents external signal interference
11CAN Conversion ChipTransceiver for CAN communication
12PWR Indicator LightRed light when voltage is detected
13Device BOOT ButtonFor entering bootloader mode
14Device Reset ButtonResets the ESP32-S3 microcontroller
15Power IsolationProvides stable isolated voltage
16RS485 Terminating ResistorReserved 120Ω, enabled via jumper cap
17CAN Termination ResistorPre-installed 120Ω, enabled via jumper cap
18RS485 & CAN Communication InterfacesTerminal blocks for external RS485 and CAN devices
19RTC Clock ChipPCF85063 Real-Time Clock
20DC-DC Power Supply ChipPower regulation
21ME6217C33M5GLow Dropout LDO (Max 800mA)
22RS485 Conversion ChipTransceiver for RS485 communication
23On-Board TVSTransient Voltage Suppressor for surge protection

4. Setup and Connections

4.1. Power Supply

The board can be powered via two methods:

  • USB Type-C Port: Connect a 5V power source via the USB Type-C port. This port also facilitates firmware download and USB communication.
  • Power Terminal Block: Connect a DC power supply within the range of 7V to 36V to the dedicated power terminal block. Ensure correct polarity (positive to VCC, negative to GND).

4.2. Communication Interfaces

Interface specifications for ESP32-S3-RS485-CAN

Figure 3: Interface specifications for power, USB, RS485, and CAN terminals.

Terminal TypePin NameDescription
Power Supply TerminalVCCPositive power supply (DC 7V to 36V)
GNDNegative power supply
RS485 TerminalA+RS485 A+ signal pin
B-RS485 B- signal pin
CAN TerminalHCAN High signal pin
LCAN Low signal pin

4.3. Terminal Pinouts (SH1.0)

Detailed pinout diagram for SH1.0 interface

Figure 4: Detailed pinout diagram for the SH1.0 interface.

The SH1.0 connector provides access to various GPIOs for expansion:

  • GPIO1, GPIO2: SH1.0 Interface Pinouts
  • GPIO15: CAN TX Pin
  • GPIO16: CAN RX Pin
  • GPIO17: RS485 TX Pin
  • GPIO18: RS485 RX Pin
  • GPIO21: RS485 EN Pin

5. Operating Instructions

5.1. Power On and Indicator Lights

Once power is supplied (via USB-C or terminal block), the board will power on. Observe the indicator lights:

Top view of ESP32-S3-RS485-CAN showing indicator lights

Figure 5: Top view showing indicator lights.

  • PWR (Red): Illuminates when voltage is detected (power is on).
  • RS485 (Green/Blue): Green light turns on when data is transmitted from the RS485 interface. Blue light illuminates when data is received back via the RS485 interface.
  • CAN (Flashing): Flashes when there is data communication on the CAN interface.

5.2. Communication Protocols

  • Wi-Fi & Bluetooth: The ESP32-S3 supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) for wireless communication.
  • RS485: The isolated RS485 interface supports Modbus industrial expansion modules. Direction control is automatic via hardware flow setting. Termination resistor (120Ω) can be enabled via jumper cap.
  • CAN: The isolated CAN interface allows connection to various CAN devices. Direction control is automatically identified and controlled by hardware. Termination resistor (120Ω) can be enabled via jumper cap.

5.3. Firmware Download and Development

Use the USB Type-C port to connect the board to a computer for firmware download and debugging. Standard ESP-IDF or Arduino IDE environments can be used for development.

5.4. Example Application (IoT Connectivity)

The board can be integrated into IoT systems. A typical setup involves the board acting as a Wi-Fi Access Point (AP) or Station (STA) to connect to the internet or local devices. It can then communicate with various industrial devices via RS485 (e.g., Modbus) and CAN, with data visualized on a web page accessible from a user's device.

Example demonstration of IoT connectivity with ESP32-S3-RS485-CAN

Figure 6: Example demonstration of IoT connectivity.

6. Maintenance

To ensure the longevity and optimal performance of your ESP32-S3-RS485-CAN board, follow these general maintenance guidelines:

  • Keep Dry: Avoid exposing the board to moisture or high humidity environments.
  • Cleanliness: Keep the board free from dust and debris. Use a soft, dry brush or compressed air for cleaning.
  • Temperature: Operate the device within its specified operating temperature range (-5°C to 50°C).
  • Physical Protection: The rail-type protective shell provides good protection; avoid dropping or subjecting the board to severe physical shocks.

7. Troubleshooting

If you encounter issues with your device, consider the following troubleshooting steps:

  • No Power (PWR LED Off):
    • Check power supply connections (USB-C or terminal block).
    • Ensure the power supply voltage is within the specified range (5V for USB-C, 7V-36V for terminal block).
  • Wi-Fi/Bluetooth Connectivity Issues:
    • Verify your firmware includes the necessary Wi-Fi/Bluetooth drivers and configuration.
    • Ensure the ceramic antenna is not obstructed. If using an external antenna, ensure it's properly connected to the IPEX socket.
  • RS485/CAN Communication Errors:
    • Check wiring for correct polarity (A+/B- for RS485, H/L for CAN).
    • Verify that termination resistors (120Ω) are correctly enabled or disabled as per your network topology.
    • Ensure the connected devices are configured for the same baud rate and communication parameters.
    • Observe the RS485/CAN indicator lights for activity. No activity might indicate a wiring issue or no data transmission.
  • Device Not Responding:
    • Try pressing the Device Reset Button.
    • If firmware issues are suspected, try reflashing the firmware via the USB Type-C port.

8. Specifications

FeatureSpecification
ModelESP32-S3-RS485-CAN
MicrocontrollerESP32-S3 (default ESP32-S3R8 chip)
Wireless Communication2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE)
USB Interface TypeUSB Type-C
Supply Voltage (USB)5V
Terminal Supply Voltage Range7V ~ 36V
Flash Memory16MB
Operating Temperature-5°C to 50°C
Dissipation Power0.5W-5W
EnclosureRail-mounted protective enclosure
Dimensions (L x W x H)91.7mm x 23.3mm x 58.8mm (approx. 3.61in x 0.91in x 2.31in)
Package Weight0.073 kg
Dimensions of the ESP32-S3-RS485-CAN board

Figure 7: Dimensions of the ESP32-S3-RS485-CAN board.

9. User Tips

  • Initial Inspection: Upon receiving your board, it is recommended to perform a visual inspection for any physical damage.
  • Firmware Check: Some units may come with pre-installed programs. If you intend to use custom firmware, be prepared to flash your own code to the device.
  • Testing: Before deploying in a critical application, thoroughly test the board's functionality with your specific setup.

10. Warranty and Support

For warranty claims, technical support, or further assistance, please contact the seller or the manufacturer directly. Keep your purchase records handy for any inquiries.

For more detailed technical documentation and resources, you may refer to the official user manual PDF available at: ESP32-S3-RS485-CAN User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.