1. Introduction
Thank you for choosing AUXITO LED Headlights. This manual provides essential information for the safe installation, operation, maintenance, and troubleshooting of your new LED headlight bulbs. Please read this manual thoroughly before installation and keep it for future reference.
Image: AUXITO H11 LED Headlight Bulbs and Packaging. Shows two LED bulbs, their retail box, and a 'CANBUS' compatible icon.
2. Safety & Warnings
- WARNING: CHOKING HAZARD – This product contains small parts. Not suitable for children under 3 years of age.
- Always wear appropriate safety gear, such as gloves, during installation.
- Ensure the vehicle's engine is off and the battery is disconnected before beginning installation to prevent electrical shock.
- Avoid touching the LED chips directly, as oils from your skin can reduce their lifespan.
- Do not look directly into the illuminated LED bulb, as it can cause eye strain or damage.
3. Product Information
3.1. Product Identification
- Product Name: AUXITO Car LED Headlight
- Model: H4 9003 / H7 / H8 H9 H11 H16(JP) / 9005 HB3 / 9006 HB4 / 9012 HIR2 / 9007 HB5 / 9008 H13
- Batch/Serial Number: AUX0001
3.2. Manufacturer & EU Representative Information
- Manufacturer: SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD
- EU Authorized Representative: APEX CE SPECIALISTS LIMITED
- Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
- Contact: Wells Yan
- Email: Info@apex-ce.com
- Postal code: 40237
- Tel: +49 21312066043
3.3. Compliance Information
This product complies with relevant European directives and standards. It bears the CE mark, indicating conformity with health, safety, and environmental protection standards. It is also RoHS compliant, restricting the use of hazardous substances. The product is marked with the WEEE symbol, indicating that it should not be disposed of with household waste but should be taken to an appropriate collection point for recycling.
Made in China.
4. Specifications
| Feature | Specification |
|---|---|
| LED Type | LED |
| Voltage | DC 12-18V (for 12V cars only) |
| Wattage | 50W/2 Bulbs |
| Lumens | 12000Lm/Set |
| Color Temperature | 6500K (Cool White) |
| Housing Material | Aviation Aluminum |
| Waterproof Rate | IP68 |
| Working Lifetime | 50,000hrs |
| Working Temperature | -40°F ~ +176°F (-40°C ~ +80°C) |
| Light Source | 7035 LED Chips |
| Features | Canbus No Error, 900% brighter than halogen, Fanless, No Radio Noise, No-polarity, Plug & Play |
| Warranty | 1 year |
Image: Comparison of 6500K Crisp White Light (LED) versus 4000K Tired Yellow Light (Halogen). The LED light provides greater visibility.
Image: Diagram of the Efficient Cooling System. Components include a pure copper base, temp-control chips, uniform heat dissipation holes, and an integrated aluminum alloy body.
5. Installation Instructions
Always ensure the vehicle is off and cool before starting installation. Refer to your vehicle's owner's manual for specific headlight assembly removal instructions if needed.
Image: 10-Minute Installation Guide. Highlights no bulky base, no external driver, and plug & play design. Shows a 1:1 size comparison with a halogen bulb and three steps: insert, twist, and connect.
5.1. For H11(H8, H9)/9008(H13)/9005(HB3)/9006(HB4)/9012(HIR2)/H10(9145,9140)
- Remove the original bulb:
- Remove the dust cover (if present).
- Disconnect the plugs.
- Turn the bulb counter-clockwise, then carefully take out the original bulb.
- Insert the LED bulb: Line up the tab parts of the LED bulb with the groove sections of the light housing, then insert the LED bulb.
- Secure the LED bulb: While pressing down the LED bulb, turn it clockwise until it locks firmly in place.
- Connect the plug: Connect the LED bulb's plug to the vehicle's harness.
- Finalize: Power test the lights. If working correctly, put the dust cover back (if applicable).
Diagram Description (from PDF): An illustration shows the LED bulb being inserted into the light housing, aligning its tabs with the housing's locking grooves. A separate inset shows the locking ring and light housing with their respective tabs and grooves.
5.2. For 9004(HB1)/9007(HB5)
- Remove the original bulb:
- Remove the dust cover (if present).
- Disconnect the plug.
- Rotate the original bulb holder counter-clockwise and remove it.
- Remove the original bulb from the holder.
- Insert the LED bulb: Insert the new LED bulb into the vehicle's original light holder.
- Secure the assembly: Insert the light holder with the LED bulb into the light housing, rotate clockwise, and lock it in place.
- Connect the plug: Connect the LED bulb's plug to the vehicle's harness.
- Finalize: Power test the lights. If working correctly, put the dust cover back (if applicable).
Diagram Description (from PDF): Illustrations show the process of removing the original bulb holder, inserting the new LED bulb into the holder, and then securing the holder back into the headlight assembly.
5.3. For 9003(H4)
- Remove the original bulb:
- Remove the dust cover (if present).
- Disconnect the plug.
- Press down and release the buckle that holds the bulb.
- Remove the original bulb.
- Insert the LED bulb: Line up the tab parts of the LED bulb with the groove sections of the light housing, then insert the LED bulb.
- Secure the LED bulb: Put the buckle back to secure the bulb in place.
- Connect the plug: Connect the LED bulb's plug to the vehicle's harness.
- Finalize: Power test the lights. If working correctly, put the dust cover back (if applicable).
Diagram Description (from PDF): Illustrations show the removal of the original H4 bulb by releasing a buckle, inserting the new LED bulb, and then re-securing it with the buckle.
6. Troubleshooting
6.1. Common Issues and Solutions
- Flickering/Error Warning: For some sensitive vehicles (e.g., Jeep, Chrysler, Dodge Ram, GMC, Ford), flickering or error warnings may occur. Contact AUXITO for proper decoders/resistors to resolve this.
- No Light:
- Check all wires are connected correctly and fuses are functioning.
- If only one bulb works, swap the left and right bulbs to determine if it's a Canbus issue or a defective bulb.
- Light is Dim: Ensure the bulbs are locked securely in place and that the LED chips are clean and intact.
Image: 99% Vehicle Compatibility. Highlights 'NO ERROR', 'NO FLICKERING', 'ZERO CANBUS ERROR'. Notes that for some sensitive cars, additional decoders or anti-flicker harnesses may be required.
6.2. Conditions Beyond Warranty Scope
- Canbus Problem: Vehicles with Canbus systems may experience flickering or error warnings. Suitable decoders are required. If decoders don't work, a full refund may be available.
- Installation Problem: Some vehicles may have limited installation space, preventing bulb installation.
- Natural Disaster: Damages caused by irresistible natural disasters (e.g., earthquake, flood) are not covered.
7. User Tips
- Verify Compatibility: Always double-check your vehicle's original bulb type before purchasing to ensure correct fitment.
- Canbus Decoders: If your vehicle is known to be sensitive to LED upgrades (e.g., European cars, newer models), consider purchasing Canbus decoders or anti-flicker harnesses alongside your bulbs to prevent dashboard errors or flickering.
- Proper Seating: Ensure the LED bulbs are fully seated and locked into the headlight housing. Improper seating can lead to poor beam patterns, reduced brightness, or premature failure.
- Beam Adjustment: After installation, check your headlight beam pattern. Some vehicles may require minor beam adjustment to ensure optimal road illumination without blinding oncoming traffic.
8. Package Contents
Your AUXITO LED Headlight package includes:
- LED Light Bulbs (2 pieces)
- Product Manual (this document)
- Gloves (for handling during installation)
9. Warranty & Support
9.1. Warranty Information
AUXITO offers a 12-month warranty on this product from the date of purchase. This warranty covers manufacturing defects and product failures under normal use.
9.2. How to Get Warranty Honored
If you experience an issue with your product within the warranty period, please follow these steps:
- Contact Seller: Reach out to the seller through the platform where you purchased the product (e.g., AliExpress message system).
- Provide Proof: Take a clear photo showing the code on the bottom of the lamp. This code is essential for warranty validation.
- Send Pictures: Send the photos to the seller. After reviewing the pictures and confirming the issue, replacements will be arranged.
Image Description (from PDF): An illustration shows the bottom of an LED lamp with a visible code, for example, 'H8/9/11 E3M 0001', indicating where to find the necessary information for warranty claims.
9.3. Customer Support
For any questions, technical assistance, or warranty claims, please contact AUXITO customer support through the platform where you made your purchase. Provide your order number and a detailed description of the issue for faster service.