1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ANYFAR Wireless CarPlay Android Auto Retrofit Kit Decoder Box. This device allows you to integrate Apple CarPlay and Android Auto functionalities into your compatible Dodge vehicle's existing infotainment system, enhancing your driving experience with smartphone connectivity.

2. Compatibility
This retrofit kit is designed for specific Dodge models equipped with an 8.4-inch screen. Please verify your vehicle's model and year against the table below to ensure compatibility before installation.

| Car Model | Years | Screen Inch |
|---|---|---|
| Challenger | 2013-2016 | 8.4" |
| Journey | 2011-2016 | |
| Charger | 2013-2016 | |
| Durango | 2014-2017 |
Important: Ensure your vehicle's screen size is 8.4 inches. Incorrect model or year may lead to incompatibility.
3. Package Contents
Please check the package for the following items:
- ANYFAR CarPlay Android Auto Decoder Box
- Main Wiring Harness
- USB Cable
- LVDS Cable
- Wi-Fi Antenna
- User Manual (this document)

4. Product Overview
The decoder box serves as the central unit for integrating CarPlay and Android Auto. It features several ports for power, data, and video connections to your vehicle's system.

Port Descriptions:
- WIFI: Connects the external Wi-Fi antenna for wireless CarPlay/Android Auto functionality.
- CAN POWER: Connects to the vehicle's CAN bus and power supply via the main wiring harness.
- USB VIDEO: Used for USB connectivity, potentially for media playback or wired CarPlay/Android Auto.
- TOGGLE SWITCH: A DIP switch or similar mechanism for configuration (refer to specific wiring diagrams for settings).
- LVDS: Connects to the vehicle's display unit for video signal integration.
5. Installation Guide
Installation requires disassembling parts of your vehicle's dashboard to access the infotainment system. Professional installation is recommended if you are not familiar with car electronics.
Safety Precautions:
- Disconnect the vehicle's battery before starting installation to prevent electrical shorts.
- Use appropriate tools to avoid damaging dashboard components.
- Ensure all connections are secure before reassembling the dashboard.
Installation Steps:
- Access the Infotainment System: Carefully remove the necessary trim panels and components to gain access to the back of your vehicle's infotainment screen and the lower module (often located under the A/C controller, potentially near a CD player if equipped).

Dashboard disassembled to access the infotainment system. - Connect the Main Wiring Harness: Locate the receiver plugs on the lower module under the A/C controller. Connect the provided main wiring harness to these plugs. This harness will typically connect in-line with existing vehicle wiring.

Wiring connections behind the car's head unit. - Connect the Decoder Box: Connect the main wiring harness, USB cable, LVDS cable, and Wi-Fi antenna to their respective ports on the ANYFAR decoder box.

The decoder box with all necessary cables connected. - Secure the Decoder Box: Find a suitable, secure location behind the dashboard to mount the decoder box, ensuring it does not interfere with other components or moving parts.
- Reassemble Dashboard: Once all connections are made and secured, carefully reassemble the dashboard components.
- Reconnect Battery: Reconnect the vehicle's battery.
6. Operating Instructions
Switching Between Systems:
The ANYFAR system operates independently from your car's factory infotainment. To switch between the factory system and the CarPlay/Android Auto interface, perform a long press on the top driver's corner of your car's screen. This action toggles the display between the two systems.
Connecting Your Smartphone:
- Ensure your smartphone's Wi-Fi and Bluetooth are enabled.
- On the CarPlay/Android Auto interface, navigate to the connection settings.
- Pair your phone via Bluetooth to the ANYFAR device (usually named something like "ANYFAR_XXXX").
- Once Bluetooth is paired, the system will prompt you to connect via Wi-Fi for wireless CarPlay or Android Auto.
- Follow the on-screen prompts to complete the connection.
Using CarPlay/Android Auto:
- The interface will display familiar CarPlay or Android Auto apps (e.g., Phone, Music, Maps, Messages, Spotify, Google Maps).
- Navigation and media playback can be controlled directly from the car's touchscreen.
- Steering wheel controls for volume and track skipping should function with the CarPlay/Android Auto interface.
- Factory backup camera functionality will override the CarPlay/Android Auto display when the vehicle is in reverse.

7. User Tips
- Initial App Selection: You may need to select your desired phone app type (CarPlay, Android Auto, etc.) each time the system starts up.
- Factory Controls: Note that climate control (A/C fan, temperature) and volume overlays from the factory system will not appear on the CarPlay/Android Auto screen. You must toggle back to the factory screen to view and adjust these specific controls, though manual controls on the dashboard will still function.
- System Independence: Remember that the ANYFAR system and your car's factory system operate as two separate entities.
- Performance: While generally responsive, some users report a slight lag. This is typically minor and does not significantly impact usability.
8. Troubleshooting
Common Issues and Solutions:
- No Display/Black Screen:
- Check all wiring connections, especially the LVDS cable, to ensure they are secure.
- Verify that the vehicle's battery was reconnected properly.
- Ensure the correct input source is selected on the car's screen (long press top driver's corner).
- CarPlay/Android Auto Not Connecting:
- Ensure your phone's Bluetooth and Wi-Fi are on.
- Forget the device from your phone's Bluetooth settings and try pairing again.
- Restart both your phone and the car's infotainment system (by turning the car off and on).
- Check the Wi-Fi antenna connection on the decoder box.
- Audio Issues (No Sound/Distorted Sound):
- Verify the audio output settings on your phone and the CarPlay/Android Auto interface.
- Ensure the car's audio input is set to the correct source (e.g., AUX if using an AUX connection).
- Check all audio-related wiring connections.
- Steering Wheel Controls Not Working:
- Ensure the CAN POWER harness is correctly installed and making good contact.
- Some vehicles may require specific DIP switch settings on the decoder box (refer to detailed wiring diagrams if provided separately).
- Incorrect Item Received/Incompatibility:
- Double-check the product model and your vehicle's year/model against the compatibility list.
- If you believe you received the wrong item, contact the seller immediately with your order details and photos of the received product and your vehicle's dashboard/plugs.
9. Specifications
| Feature | Detail |
|---|---|
| Brand Name | ANYFAR |
| Origin | Mainland China |
| Connectivity Technology | Auxiliary, USB, Wi-Fi |
| Controller Type | Android, Siri |
| Special Feature | Apple CarPlay, Android Auto |
| Compatible Devices | Smartphone |
| Total HDMI Ports | 1 (if applicable, check specific model) |
| Connector Type | 3.5mm Jack (for AUX audio), USB |
| Audio Output Mode | Stereo |
| Surround-Sound Channel Configuration | 4.0 |
| Video Encoding | H.264, H.265/HEVC |
| Package Length | 25 cm |
| Package Width | 16 cm |
| Package Height | 10 cm |
| Package Weight | 0.94 kg |
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
11. Frequently Asked Questions (FAQ)
No specific FAQ content is available at this time. For common issues, please refer to the Troubleshooting section or contact customer support.