Thank you for choosing the CYCLAMI RT02 Smart Radar Bicycle Tail Light. This device is designed to enhance your cycling safety by providing intelligent radar detection of approaching vehicles, a smart brake sensing function, and various lighting modes. Please read this manual carefully before using the product to ensure proper operation and maintenance.
Package Contents
Please check the package contents to ensure all items are present:
1 x RT02 Tail Light
1 x Saddle Bracket
1 x Seatpost Bracket
1 x TYPE-C Charging Cable
1 x Wrench (for saddle bracket installation)
Image: Package contents of the RT02 Smart Radar Bicycle Tail Light.
Setup
1. Charging the Device
Before first use, fully charge the RT02 tail light. Use the provided TYPE-C charging cable to connect the device to a USB power source (e.g., computer, USB wall adapter).
Charging Indicator: The indicator light will blink red when charging (power < 100%).
Fully Charged: The indicator light will turn solid green when the battery is 100% charged.
2. Mounting the Tail Light
The RT02 offers two mounting options: on the seatpost or under the saddle.
Option A: Mounting to the Seatpost
Attach the seatpost bracket to your bicycle's seat tube using the strap. Ensure it is securely fastened and stable.
Align the bottom buckle of the RT02 tail light with the notch on the bracket base.
Press the tail light into the notch and rotate it 45 degrees until it clicks securely into place.
Image: Seatpost mounting instructions.
Option B: Installing Under the Saddle
Snap the left and right fasteners of the saddle bracket base under your seat cushion rails. Insert the left and right screws through the bracket and rails.
Adjust the position of the base to your preference and tighten the left and right screws firmly with the provided wrench.
Align the bottom buckle of the RT02 tail light with the notch on the bracket base.
Press the tail light into the notch and rotate it 45 degrees until it clicks securely into place.
Image: Saddle mounting instructions.
Operating Instructions
Image: RT02 Tail Light Controls Overview.
1. Tail Light Control
Power On: In the off state, click the tail light switch (bottom button) to turn on the device.
Mode Switching: The tail light has 5 lighting modes: Bright, Fast Flashing, Slow Flashing, Breathing Flashing, and Warning Flashing. Click the tail light switch to cycle through these modes.
Power Off: If the device has been on for more than 5 seconds, click the tail light switch to turn it off. Alternatively, long-press the tail light switch to turn it off from any mode.
2. Radar Function
The RT02 features a 24GHz millimeter wave radar to detect approaching vehicles.
Radar Switch: Click the radar switch (top button) to toggle the radar function on or off.
Vehicle Detection (60m): When a vehicle or pedestrian is detected entering the detection distance (up to 60 meters), the tail light will highlight, and the buzzer will emit a single "beep" sound to alert you.
Close Proximity Alert (10m): When a vehicle or pedestrian is detected within 10 meters, the tail light will flash rapidly, and the buzzer will emit two "beeps" to provide a stronger warning.
Intelligent Filtering: The radar is designed to detect only vehicles traveling at least 10 km/h faster than your bicycle, filtering out slower vehicles or stationary objects to reduce false alarms.
Radar Function Tip:
When the radar function is turned on, the indicator light will flash twice.
When the radar function is turned off, the indicator light will fade from brightest to off.
Image: Radar Active Warning features.
Image: Radar Warning Sound explanation.
3. Brake Sensor Function
The RT02 automatically enters brake sensing mode when the tail light or radar function is active.
When the bicycle's brake is detected, the tail light will illuminate brightly for 3 seconds to alert pedestrians and vehicles behind you.
4. Auto-Sleep and Wake-Up
The RT02 will automatically enter hibernation (sleep) state if no movement is sensed within 30 seconds. In this state, both the tail light and radar functions are off.
When vibration is detected (e.g., you start riding), the device will automatically exit hibernation and return to its pre-hibernation state (tail light and radar functions will resume as they were).
5. Buzzer Control
Toggle Buzzer: Double-click the radar switch (top button) to turn the buzzer on or off.
Buzzer On: Two "beeps" will be emitted when the buzzer is turned on.
Buzzer Off: A single "beep" will be emitted when the buzzer is turned off.
6. Indicator Light Description
The indicator light provides information about the device's status:
Video: Demonstration of CYCLAMI RT02 radar detection, brake sensing, and intelligent sleep/wake features.
Maintenance
Cleaning: Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
Water Resistance: The RT02 has an IP64 protection rating, meaning it is protected from dust and splashing water. Do not immerse the device in water or expose it to heavy rain for prolonged periods.
Storage: When not in use for an extended period, fully charge the device before storing it. Recharge it every three months to maintain battery health.
Battery Care: Avoid exposing the device to extreme temperatures (very hot or very cold) as this can affect battery life and performance.
Antenna Clearance: To ensure accurate radar sensing, do not place any covers or obstructions in front of the radar antenna.
Troubleshooting
Problem
Possible Cause / Solution
Device does not turn on.
Battery may be depleted. Charge the device fully.
Radar not detecting vehicles or giving false alerts.
Ensure there are no obstructions in front of the radar antenna.
Check if the radar function is enabled (blue indicator light).
The radar filters vehicles moving slower than 10km/h relative to you.
Ensure the device is mounted correctly and not tilted excessively.
Buzzer is not sounding.
Double-click the radar switch to ensure the buzzer is turned on.
Short battery life.
Using the radar function continuously consumes more power.
Ensure the device is fully charged before use.
Battery performance may degrade over time with extensive use.
Device does not connect with GPS or Bluetooth apps.
The CYCLAMI RT02 is a standalone device and does not support GPS integration or Bluetooth connectivity with external apps. It functions independently.
Radar only alerts for the first vehicle in a series.
This is a known characteristic of the device. The radar primarily focuses on the initial detection of an approaching vehicle.
Specifications
Image: RT02 Specifications Table.
Feature
Detail
Light Modes
Bright, Fast Flashing, Slow Flashing, Breathing Flashing, Warning Flashing
Endurance (Bright Mode)
Approx. 3 hours
Endurance (Flashing Modes)
Approx. 3 hours
Battery
1000mAh Polymer Lithium Battery
LED
COB light source * 40
Radar Type
24GHz Millimeter Wave Radar
Radar Detection Range
Up to 60 meters
Radar Detection Angle
54 degrees
Alarm Sound Level
80 dB
Battery Life (Lab Data)
Approx. 3-6 hours (depending on mode and radar usage)
Body Material
Aluminum alloy + PC
Waterproof Level
IP64
Dimensions
62 x 42 x 24 mm
Weight
Approx. 55g
User Tips
Multiple Vehicles: Be aware that the radar primarily alerts for the first approaching vehicle in a series. Maintain situational awareness, especially in traffic.
Mounting Compatibility: The seatpost strap may be designed for aero seatposts. If you have a traditional round seatpost, ensure the strap provides a secure fit.
Audibility: In very busy or windy environments, the buzzer sound might be difficult to hear clearly. Pay attention to the visual light alerts as well.
Warning Timing: Some users find the warning signal to be slightly late. Always combine the device's alerts with your own visual checks and road awareness.
Warranty and Support
The CYCLAMI RT02 Smart Radar Bicycle Tail Light comes with a warranty against defects in materials and workmanship. Please refer to the warranty card included in your package for specific terms and conditions.
Product Warranty: Typically, a one-year free warranty is provided for quality problems or defects of the product itself.
Battery Warranty: The battery usually has a separate warranty period, often 6 months.
Exclusions: Product defects or damages caused by improper use, unauthorized modification, or repair are generally not covered under warranty.
For further assistance or support, please contact CYCLAMI customer service.
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.