PNMNON USB Curtain Lights Garland with Remote

Contents

USB Curtain Fairy Lights Instruction Manual

Model: USB Curtain Lights Garland with Remote

Brand: PNMNON

1. Introduction

Thank you for purchasing the PNMNON USB Curtain Fairy Lights. This product is designed to add a magical ambiance to your space, perfect for various decorative purposes such as wedding decorations, Christmas decorations, and holiday party decorations. Please read this manual carefully before use to ensure proper installation and operation.

2. Safety Information

  • Keep out of reach of children.
  • Do not expose to extreme temperatures or direct water immersion unless specified as waterproof.
  • Ensure the USB power source is compatible with 5V output.
  • Do not attempt to modify or repair the product yourself. Contact customer support if needed.
  • Unplug from the power source when not in use for extended periods.

3. Package Contents

  • 1 x USB Curtain Fairy Lights (selected size/LED count)
  • 1 x Remote Control (CR2025 battery not included)
  • 1 x USB Power Cable

4. Specifications

FeatureDetail
Product NameUSB Curtain Lights
Voltage5V DC
Luminous Flux<60
Power SourceDC
Remote ControlYes, 8 modes
Remote Battery1x CR2025 (not included)
CertificationsRoHs, UL, RoHS, CE
Lead Length200cm (78.74 inches)
Remote Dimensions8.5cm x 3.9cm (3.35in x 1.54in)
USB Plug Length5.2cm (2.05in)

Available Sizes:

Model (Width x Height)LED QuantityStrings Quantity
3Mx1M100LEDs10 Strings
3Mx2M200LEDs10 Strings
3Mx3M300LEDs10 Strings
4x2M300LEDsNot specified
4x3M450LEDsNot specified
6x2M400LEDsNot specified
6Mx3M600LEDs20 Strings

Note: Dimensions and LED counts may vary slightly by specific model.

Diagram showing dimensions and LED counts for different models, and remote/USB plug dimensions.
Figure 1: Product dimensions and remote control details.

5. Setup Guide

  1. Unpacking: Carefully remove the lights from the packaging. Gently untangle the individual strings to avoid damage.
  2. Remote Control Battery Installation: The remote control is shipped without a CR2025 battery. You will need to purchase one separately. Open the battery compartment on the back of the remote control, insert the CR2025 battery with the correct polarity, and close the compartment. The remote will only function correctly after the battery is installed.
  3. Placement: Hang the curtain lights in your desired location. Ensure the USB cable can reach a compatible 5V USB power source (e.g., USB wall adapter, power bank, computer USB port).
  4. Power Connection: Plug the USB connector into a 5V USB power source. The lights should illuminate.
Close-up of pink curtain lights with remote and USB plug, showing the USB connection point.
Figure 2: USB plug and remote control for the curtain lights.

6. Operating Instructions

The remote control allows you to manage the lights from a distance. Ensure the remote is pointed towards the USB receiver for optimal functionality.

Remote Control Functions:

  • ON/OFF: Turns the lights on or off.
  • TIMER: Activates or deactivates the timer function.
  • MODE 1-8: Cycles through 8 different lighting modes (e.g., combination, in waves, sequential, slo-glo, chasing/flash, slow fade, twinkle/flash, steady on).
  • DIM +/-: Adjusts the brightness level of the lights.
A hand holding the remote control, pointing towards pink curtain lights.
Figure 3: Operating the curtain lights with the remote control.
Video 1: Demonstration of the curtain lights and various lighting modes.

7. Maintenance

  • Cleaning: Gently wipe the lights with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: When not in use, carefully gather the light strings and store them in their original packaging or a suitable container to prevent tangling and damage. Store in a cool, dry place.
  • Battery Replacement: Replace the CR2025 battery in the remote control when its performance diminishes.

8. Troubleshooting

Lights not turning on:

  • Check if the USB power source is active and providing 5V.
  • Ensure the USB connector is fully inserted.
  • Verify the remote control battery is correctly installed and not depleted. Replace if necessary.
  • Try pressing the ON button on the remote.

Remote control not working:

  • Ensure the remote has a fresh CR2025 battery installed with correct polarity.
  • Point the remote directly at the USB receiver.
  • Check for any obstructions between the remote and the receiver.
  • Ensure the lights are powered on.

Lights flickering or dim:

  • Check the power source for stable 5V output.
  • Adjust brightness using the DIM buttons on the remote.

9. User Tips

  • Remote Battery: Always ensure a fresh CR2025 battery is installed in the remote for optimal functionality, as it is not included with the product.
  • Color Perception: Note that the 'Pink' color may appear more purple under certain lighting conditions or due to screen calibration. Refer to product images for general color representation.
  • Installation: When hanging, gently uncoil each string to prevent tangling and ensure an even curtain effect.
  • Product Structure: The lights consist of small LEDs integrated into thin wires, which are then arranged as vertical strings from a main horizontal wire.

10. Compliance and Certifications

This product complies with relevant safety and environmental standards, including RoHs, UL, RoHS, and CE certifications.

11. Disposal Information

Do not dispose of this product with household waste. Please recycle electronic components responsibly at designated collection points to prevent potential harm to the environment and human health.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.