1. Product Overview
The Debra DP-10 is a professional audio mixer and DJ controller designed for versatile audio mixing, recording, and performance. It features 99 DSP effects, a 7-band graphic equalizer, USB connectivity, and Bluetooth 5.0 for seamless integration with various audio sources.

For a visual overview of the product, please watch the following video:
2. Setup Guide
2.1 Power Connection
- Ensure the mixer's power switch is in the OFF position.
- Connect the provided AC adapter to the DC IN port on the rear panel of the mixer.
- Plug the AC adapter into a suitable power outlet (AC 110-240V/50-60HZ).
- Flip the POWER switch to the ON position. The power indicator should light up.

2.2 Input Connections
The DP-10 offers various input options:
- Microphone Inputs (MIC): Connect microphones using XLR or 6.5mm audio input jacks.
- Line Inputs (LINE IN): Connect line-level devices (e.g., keyboards, CD players) using 6.5mm jacks.
- Stereo Inputs (STEREO): For stereo line-level sources.
- USB Interface: Connect to a PC for recording/playback or insert a USB stick for direct audio playback/recording.

2.3 Output Connections
The mixer provides multiple output options:
- Main Outputs (MAIN OUTS): Connect to your main PA system or recording interface.
- Control Room Output (CTRL OUT): For monitoring.
- Headphone Output (PHONES): Connect headphones for personal monitoring.
- Auxiliary Outputs (AUX1, AUX2): For sending signals to external effects processors or monitor mixes.
2.4 Bluetooth Connection
The DP-10 features Bluetooth 5.0 for wireless audio streaming. To connect a Bluetooth device:
- Ensure Bluetooth is enabled on your device.
- Select the Bluetooth input on the mixer.
- Search for the mixer's Bluetooth name (usually 'DP-10' or similar) on your device and pair.
3. Operating Instructions
3.1 Channel Control
Each input channel features:
- GAIN Control: Adjusts the input sensitivity for microphones and line-level signals.
- EQ (High, Mid, Low): 3-band equalizer to shape the tone of each channel.
- AUX Sends: Controls the amount of signal sent to the auxiliary outputs.
- Pan/Balance: Positions the channel's signal in the stereo field.
- Channel Fader: Adjusts the volume of the individual channel. The mixer features high-quality damping faders for smooth control.
3.2 DSP Effects (99 Reverb)
The DP-10 includes 99 high-performance digital reverberation effects to enhance your sound. The effects are displayed on a high-definition screen.

Available DSP effects include:
- 1-3: HALL
- 4-6: PLATE
- 7-9: BRIGHT ROOM
- 10-12: WARM ROOM
- 13-15: CLUB
- 16-18: CHAMBER
- 19-21: CHURCH
- 22-24: GATE REVERB
- 25-27: SPRING REVERB
- 28-30: SLAP REVERB
- 31-39: MONO DELAY
- 40-48: STEREO DELAY
- 49-57: STEREO ECHO
- 58-66: MONO ECHO
- 67-69: CLASSICAL CHORUS
- 70-72: HEAVY FLANGER
- 73-75: CLASSICAL FLANGER
- 76-78: SHORT FLANGER
- 79-81: TREMOLO
- 82-84: WAH WAH
- 85-87: PHASER
- 88-90: PITCH SHIFTER
- 91-93: DISTORTION
- 94-96: HALL*DELAY
- 97-98: PLATE*DELAY
- 99: CHORUS*DELAY
3.3 7-Band Graphic Equalizer
The integrated 7-band graphic equalizer allows for precise control over the overall smoothness and quality of the sound, ensuring a fuller audio experience.

3.4 USB Playback and Recording
The USB interface supports both playback from a USB stick and recording to a USB stick. It can also connect to a PC for digital audio transfer.
4. Maintenance
To ensure the longevity and optimal performance of your Debra DP-10 mixer, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the mixer. Avoid using abrasive cleaners or solvents.
- Dust Protection: Keep the mixer covered when not in use to prevent dust accumulation, especially on faders and knobs.
- Environmental Conditions: Operate and store the mixer in a dry environment, away from extreme temperatures, direct sunlight, and moisture.
- Cable Management: Ensure all cables are properly routed and not under strain to prevent damage to connectors and ports.
5. Troubleshooting
If you encounter issues with your DP-10 mixer, try the following basic troubleshooting steps:
- No Power: Check if the power adapter is securely connected and the power outlet is functional. Ensure the power switch is ON.
- No Sound Output: Verify all input and output cables are correctly connected. Check channel faders, main mix faders, and gain controls are not set to minimum. Ensure monitoring devices (headphones, speakers) are connected and powered.
- Distorted Sound: Reduce input gain levels to prevent clipping (indicated by the CLIP LED). Check cable integrity.
- Bluetooth Connection Issues: Ensure no other devices are connected to the mixer via Bluetooth. Try restarting both the mixer and your Bluetooth device.
- USB Playback/Recording Problems: Ensure the USB stick is formatted correctly and contains compatible audio files. Check that the USB stick is inserted properly.
For more detailed troubleshooting, please refer to the full user manual PDF.
6. Specifications

| Feature | Description |
|---|---|
| Model Number | DP-10 |
| Type | Mixers |
| Dimensions (L x W x H) | 410mm x 340mm x 40mm |
| Input Sensitivity | -60dBm ~ -40dBm |
| Nominal Input Level (Mic) | -60dBm |
| Nominal Input Level (Line) | -20dBm |
| Nominal Input Level (Eff Ret) | -20dB |
| Nominal Input Level (Aux In) | -20dB |
| Nominal Input Level (Tape In) | -10dB |
| Nominal Output Level (Eff Send) | -10dB |
| Nominal Output Level (Aux Send) | 0dB |
| Common Mode Rejection | -17dB |
| Output Voltage (mixer part) | 4V Max |
| S/N Ratio | ≥80dB |
| THD (1KHz Full Power) | Less than 0.03% (at 1 KHz) |
| Frequency Response | 20Hz-20KHz±3dB |
| Headphone | 7V/ 220Ω |
| Parametric EQ (Hi) | ±15dB/12KHz |
| Parametric EQ (Mid) | ±15dB/2.5K |
| Parametric EQ (Low) | ±15dB/80KHz |
| Power Consumption | 30W |
| Power Supply | AC 110-240V/50-60HZ |
| Voltage Range | Low voltage non-USB (below 75V DC, below 50V AC) |
| Inbox Adaptor | Yes |
| Built-in Battery | No |
| Power Source | AC&DC |
| High-concerned chemical | None |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
7. User Tips
- Start with Low Gain: Always begin with input gain controls set low and gradually increase them to avoid sudden loud noises or clipping.
- Monitor Levels: Regularly check the main output level meters to ensure your audio is not clipping (going into the red), which can cause distortion.
- Experiment with DSP Effects: The 99 DSP effects offer a wide range of creative possibilities. Take time to experiment with different effects to find the best sound for your performance or recording.
- Proper Cable Usage: Use high-quality, shielded cables for all audio connections to minimize interference and noise.
8. Warranty and Support
For detailed warranty information, service, and technical support, please refer to the official user manual PDF or contact the seller directly.
You can view the comprehensive user manual (PDF) here.