1. Introduction
Thank you for choosing the QIDEWIN LED Interior Dome Map Light Bulb Kit. This kit is designed to upgrade your vehicle's interior lighting to brighter, more efficient LED lights, offering a modern aesthetic and improved visibility. This manual provides essential information for safe installation, operation, and maintenance of your new LED light kit.
2. Product Features
- Voltage: 12 V / 24 V compatible
- Item Type: Interior Lighting
- Socket Types: T5, T10, W5W, Festoon LED
- Features: Canbus compatible, No Error, Error Free design
- Installation: Plug and play for easy setup
- Brightness: Up to 300% brighter than standard halogen bulbs
- Included: Free installation pry tool
Figure 1: Brightness comparison - Original Halogen vs. QIDEWIN LED
3. Safety & Warnings
- Professional Installation: Only professional personnel are allowed to install and debug. It is strictly prohibited to modify internal circuits or light sources without authorization.
- Water Damage: For outdoor use (if applicable to specific vehicle lights), confirm that the seal is intact to avoid damage caused by water accumulation.
- Environmental Hazards: Keep away from sources of fire and corrosive environments.
- Correct Connection: Connect the plug model directly to the corresponding model of your own car. Ensure the product is only applicable to the corresponding vehicle model.
- Physical Damage: Avoid scratching the surface of the lamp assembly with sharp objects to prevent affecting the light transmission effect.
- Cleaning: Avoid using high-pressure water guns to directly flush the controller interface when washing the car.
- Child Safety: Keep the device and its cord out of reach of children under 3 years old.
4. Setup & Installation
This LED light kit is designed for plug-and-play installation. An installation pry tool is included to assist with safely removing existing light covers.
Figure 2: QIDEWIN LED Interior Light Kit Components
4.1 Pre-Installation Check
- Before ordering, verify your vehicle's model, year, and configuration to ensure compatibility and avoid installation failure due to model mismatch.
- Before first use, it is recommended to activate the ambient lighting function in the "Vehicle Settings - Lights" section of your car's central control screen (some models may require a synchronous upgrade of the car's infotainment system to the latest version).
4.2 Installation Steps
Refer to the video demonstration for a visual guide.
- Locate Light Fixture: Identify the interior dome or map light fixture you wish to replace.
- Pry Open Cover: Carefully use the provided plastic pry tool to gently unclip and remove the transparent cover of the light fixture.
- Remove Old Bulb: Once the cover is off, carefully remove the existing halogen bulb from its socket.
- Insert LED Bulb: Insert the new QIDEWIN LED bulb into the socket. Ensure it is seated firmly.
- Test Light: Before reattaching the cover, briefly turn on your car's interior lights to confirm the LED bulb illuminates correctly. If it does not light up, try flipping the LED bulb 180 degrees, as LEDs are polarity sensitive.
- Reattach Cover: Once confirmed working, carefully snap the transparent cover back into place until it is securely fastened.
- Repeat: Repeat the process for all other interior lights you wish to upgrade.
Video 1: LED Interior Light Installation Demonstration
5. Operating Instructions
The QIDEWIN LED Interior Light Kit operates in conjunction with your vehicle's existing interior lighting controls. There are no separate controls for the LED bulbs themselves. Simply use your car's switches to turn the interior lights on or off, or set them to activate when doors open.
Figure 3: Interior lighting in White and Ice Blue options
6. Maintenance
- Cleaning: Turn off the device (car lights) before cleaning. Use a soft, lint-free cloth to gently wipe the LED bulbs and light covers. Do not use abrasive cleaners or solvents.
- Storage: If you remove the LED bulbs for any reason, store them in a dry place at room temperature (15°C - 35°C).
7. Troubleshooting
- Lights Not Turning On/Flickering:
- First, check if the LED bulb is securely plugged into its socket.
- If the bulb does not light up, try removing it and re-inserting it, rotating it 180 degrees, as LEDs are polarity sensitive.
- Ensure the vehicle's interior light switch is in the correct position.
- Persistent Issues: If the problem persists (lights do not turn on, flicker, or cannot be controlled after checking connections), please contact the seller's customer service. Provide your vehicle information (make, model, year) to obtain targeted troubleshooting solutions.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | LED signal lights / Car turn signal lights |
| Brand Name | QIDEWIN |
| Item Type | Interior Lighting |
| Voltage | 12 V / 24 V |
| Socket Types | T5, T10, W5W, Festoon LED |
| Features | Canbus, No Error, Error Free, Plug and Play |
| Origin | Mainland China |
| Certifications | CE, RoHS, UKCA (as per general product compliance) |
9. Disposal & Recycling
This product contains electronic components and should not be disposed of with household waste. The symbol of a crossed-out wheeled bin indicates that the product must be taken to a designated collection point for recycling electronic waste. Proper disposal helps prevent potential negative consequences for the environment and human health.
10. Warranty & Support
For warranty information, technical support, or any inquiries regarding your QIDEWIN LED Interior Dome Map Light Bulb Kit, please contact the seller directly through your purchase platform. Please have your order details available when contacting support.