BUCKLOS Bicycle Handlebar Grips

Contents

BUCKLOS Bicycle Handlebar Grips User Manual

Model: Bicycle Handlebar Grips

Brand: BUCKLOS

1. Introduction

Thank you for choosing BUCKLOS Bicycle Handlebar Grips. These grips are designed to provide a comfortable and secure hold for various types of bicycles, including mountain bikes, e-bikes, stationary bikes, scooters, and 3-wheel bikes. Featuring a double aluminum lock-on ring design, they ensure a firm attachment to your handlebars, enhancing your riding experience. This manual provides essential information for proper installation, usage, maintenance, and safety.

2. Safety Information

Warning! Failure to comply with the following safety precautions may result in personal injury, property damage, or product malfunction. Read and follow all instructions carefully before use.

  • Keep the product away from children under 14 years old to avoid choking hazards (for small parts) or other injuries.
  • Do not overload the product or use it with incompatible accessories that are not approved by the manufacturer.
  • Minors under 14 years old must use the product under the supervision of adults.
  • Do not modify, disassemble, or refit the product without authorization, as this will invalidate compliance certifications and cause potential safety hazards.
  • Do not use the product in extreme environments (e.g., high temperature, high humidity) beyond the specified range.
  • Dispose of the product in accordance with EU WEEE Directive (2012/19/EU) and local waste recycling regulations. Do not discard it as household waste.

3. Package Contents

Please check the package to ensure all components are present and undamaged:

  • 1 Pair Handlebar Grips
  • 2 End Plugs
BUCKLOS Handlebar Grip Packaging
Figure 1: Product packaging showing BUCKLOS Handlebar Grip box.

4. Specifications

Attribute Value
Product Name Bicycle Handlebar Grips
Brand Name BUCKLOS
Material Aluminum Alloy Lock Ring + PU Handlebar Tape + PP Lining
Weight 92g/pair
Length 13 cm (5.1 inches)
Outer Diameter 3.3 cm (1.9 inches)
Internal Diameter 22.2 mm (0.86 inches)
Colors Available Colorful, Black, White, Red, Orange, Blue, Green, Pink, Purple
Package Weight 0.12 kg
Package Dimensions 15 cm (L) x 8 cm (W) x 8 cm (H)
Size and Weight Diagram
Figure 2: Dimensions and weight of the handlebar grips.
BUCKLOS Handlebar Grips in various designs
Figure 3: BUCKLOS Handlebar Grips showcasing different patterns and colors.
Multiple color options for grips
Figure 4: Available color combinations for BUCKLOS Handlebar Grips.

5. Setup and Installation

These grips feature a standard 22.2mm (0.86 inch) internal diameter, suitable for most bicycles. The double aluminum lock-on ring design ensures a secure fit.

  1. Unpack the handlebar grips and end plugs. Inspect them for any damage.
  2. Ensure your bicycle handlebars are clean and free from old grip residue.
  3. Slide each grip onto the handlebar. The dual lock-on rings should be positioned at the inner and outer ends of the grip.
  4. Adjust the grips to your desired angle and position.
  5. Using a 3mm Allen wrench, tighten the screws on both aluminum lock rings of each grip. Ensure they are snug but do not overtighten.
  6. Insert the end plugs into the open ends of the handlebars.
Handlebar Grip Installation Diagram
Figure 5: Installation steps for the double aluminum lock-on ring grips, showing the use of a 3mm wrench.
Compatibility with various bike types
Figure 6: BUCKLOS grips are compatible with E-Bikes, Stationary Bikes, Scooters, 3-wheel bikes, and Wheelchair Carts.

6. Operating Instructions

Once installed, the BUCKLOS handlebar grips are ready for use. Simply hold the grips firmly while riding to maintain control and comfort. The textured PU surface is designed to provide excellent grip, even in challenging conditions.

7. Maintenance

  • Cleaning: Wipe the grips with a damp cloth and mild soap as needed. Avoid harsh chemicals that may damage the material.
  • Storage: Store the product in a dry, well-ventilated place when not in use.
  • Inspection: Periodically check the grips for any signs of wear, tear, or damage. Ensure the lock-on rings remain tight. If the grips become loose, re-tighten the screws with a 3mm Allen wrench.
  • Replacement: If the grips show significant wear or damage, replace them to ensure optimal safety and performance.

8. Troubleshooting

Grips feel loose on the handlebar:
Ensure the aluminum lock-on rings are properly positioned and the screws are tightened securely with a 3mm Allen wrench. Do not overtighten.
Discomfort during riding:
Adjust the angle and position of the grips on the handlebar to find the most ergonomic and comfortable setup for your hands.
Grips are damaged or worn:
Replace the grips with a new pair to maintain safety and performance.

9. User Tips

  • The dual lock-on collars make installation straightforward and ensure the grips stay completely secure on the handlebars, even during aggressive riding.
  • The textured PU surface provides excellent grip, which is particularly beneficial when hands are sweaty or in wet conditions.
  • These grips are noted for their soft yet durable material, offering a comfortable feel without compromising longevity. They are made of non-slip PU, suitable for mountain biking and other off-road uses, not traditional road tape.

10. Compliance Markings

The following compliance markings are affixed to the product body and packaging, indicating conformity with EU regulatory requirements:

  • CE Marking: Affixed in a visible, legible, and indelible manner, confirming compliance with applicable EU directives. The CE Marking shall not be altered or removed without permission.
  • RoHS 2.0 Directive (2011/65/EU, amended by (EU) 2015/863): Restricts the use of certain hazardous substances in electrical and electronic equipment.
  • REACH Regulation ((EC) No 1907/2006): Addresses the production and use of chemical substances, and their potential impacts on both human health and the environment.

11. Warranty and Support

For detailed warranty information, technical support, or a complete list of applicable harmonized standards, please contact the manufacturer:

Manufacturer: Fujian Quantu Trading Co., Ltd.
Address: CN-Room 701-7, No. 452, Tongyuan Street, Huacheng Community, Huada Street, Fengze District, Quanzhou City, Fujian Province
Email: 737136476@qq.com

You may also refer to the official user manual PDF for additional details: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.