Mabpedo Luminous Wall Clock

Contents

Mabpedo Luminous Wall Clock

Instruction Manual

1. Product Overview

Thank you for choosing the Mabpedo Luminous Wall Clock. This clock features a silent quartz movement, luminous numbers and pointers for visibility in the dark, and a stylish design suitable for various rooms.

Mabpedo Luminous Wall Clock in a living room setting

Image: Luminous Wall Clock displayed in a modern living room.

2. Setup Instructions

2.1. Unpacking

Carefully remove the clock from its packaging. Inspect for any damage. Keep packaging for future transport if needed.

2.2. Battery Installation

  1. Locate the battery compartment on the back of the clock.
  2. Insert one (1) AA battery (not included) into the battery slot. Ensure the positive (+) and negative (-) terminals of the battery align correctly with the markings inside the compartment.
  3. Close the battery compartment cover securely.
Diagram showing the back of the clock with battery compartment, luminous numbers, and pointers

Image: Detailed view of clock components, including ABS plastic frame, luminous numbers, luminous pointer, and the 1xAA battery compartment.

2.3. Mounting the Clock

The clock can be mounted using either a traceless hook or a nail-free hook, depending on your wall type.

Back of the Clock Components:

On the back of the clock, you will find the clock shell buckle, suspension hole, clock movement, pointer adjustment knob, and battery compartment.

Using a Traceless Hook:

  1. Use a pen to determine the desired position on the wall.
  2. Use a hammer to drive the nails on the bracket into the wall.
  3. Confirm that the hook has been nailed securely and will not fall off. Then, hang up the wall clock using the suspension hole.

Using a Nail-Free Hook (for smooth surfaces):

  1. Clean the wall surface where you want to place the hook.
  2. Tear off the protective film from the back of the hook.
  3. Press the hook firmly onto the wall to remove any air bubbles. Leave undisturbed for several hours (as recommended by hook manufacturer) before hanging the wall clock.

Warm Tip: Please use traceless hooks for general walls, and use nail-free hooks only on smooth surfaces.

3. Operating Instructions

3.1. Setting the Time

To set the time, use the pointer adjustment knob located on the back of the clock movement. Gently turn the knob until the hour, minute, and second hands display the correct time. Avoid moving the hands directly by hand to prevent damage.

3.2. Luminous Feature

The clock features luminous numbers and pointers. These elements absorb light energy during the day (from natural sunlight or artificial room lighting) and then glow in the dark, providing visibility at night. The intensity and duration of the glow depend on the amount and intensity of light absorbed during the day.

Comparison of clock visibility in daylight and in the dark

Image: The clock showing its appearance in a brightly lit room (right) and its luminous glow in a dark room (left).

Close-up of luminous numbers on the clock face

Image: Close-up view of the luminous numbers on the clock face.

4. Maintenance

4.1. Cleaning

To clean the clock, gently wipe the surface with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the clock's finish or luminous properties.

4.2. Battery Replacement

When the clock starts losing time or stops, it's time to replace the battery. Refer to Section 2.2 for battery installation instructions.

5. Troubleshooting

5.1. Clock Hands Not Moving Issue

If the clock hands are not moving or are misaligned, follow these steps:

  1. Disassembly: Flip the clock over. Carefully unbuckle the clock shell buckles one by one to separate the back cover and access the movement.
  2. Hand Alignment: Gently pull out the second hand first, then carefully pull out the hour and minute hands together.
  3. Re-positioning Hands: Adjust the shape of the hands if they appear bent. Press all hands firmly back into their respective positions on the central shaft in the following order: hour hand, then minute hand, then second hand. Ensure they are parallel and do not touch each other.
  4. Reassembly: Place the glass and outer frame on a flat surface. Reattach the clock face and back cover, ensuring all components are properly seated. Fasten the shell buckles one by one until secure.

If the issue persists after these steps, ensure the battery is fresh and correctly installed.

6. Specifications

Feature Specification
Brand NameMabpedo
TypeWall Clocks
ShapeCircular
FormSingle Face
Motivity TypeQuartz
Display TypeNeedle
FeatureLUMINOVA, Loudspeaker Mute (Silent)
Material (Face)Glass & Crystal (4K HD Reinforced Glass)
Body MaterialPlastic (ABS)
StyleBrief
CombinationSeparates
Applicable PlacementLiving Room, Study, Bedroom, Kitchen
OriginMainland China
Battery Required1x AA (Not Included)
Is Smart DeviceNo

Available Sizes:

  • 8 inch (approx. 20 cm diameter)
  • 10 inch (approx. 25 cm diameter)
  • 12 inch (approx. 30 cm diameter)
Diagram showing available clock sizes: 8 inch, 10 inch, and 12 inch

Image: Visual representation of the three available clock sizes (8, 10, and 12 inches).

Packaging Dimensions (approx. for one unit):

  • Length: 31 cm
  • Width: 31 cm
  • Height: 8 cm
  • Weight: 0.7 kg
Impact experiment showing tempered glass clock versus ordinary glass clock after a drop

Image: Impact experiment demonstrating the durability of 4K HD reinforced tempered glass compared to ordinary glass, which shatters.

Close-up of the brand movement for accurate timekeeping

Image: Detailed view of the brand movement, highlighting its gears and coil for accurate and silent timekeeping.

7. User Tips

  • For optimal luminous effect, ensure the clock is exposed to sufficient light during the day.
  • Handle the clock with care during installation and battery replacement to avoid damage to the hands or glass.
  • When mounting, use the appropriate hook type for your wall surface (traceless for general walls, nail-free for smooth surfaces).
  • Ensure the battery is fresh and correctly inserted for accurate and silent operation.

8. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact your seller directly. Please refer to the full user manual PDF available on the product page for more detailed information.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.