Introduction
The MOES Tuya ZigBee Smart LED Downlight is an advanced smart home device designed for modern lighting control. It communicates with mobile phones, tablets, and other devices via ZigBee connection, enabling remote control, timing switches, voice control, and various other smart functions. The downlight integrates LED lamp beads within a durable lampshade, connecting to your home network through a ZigBee module for seamless user control via mobile applications or smart speakers.
Warnings and Safety Information
- It is recommended that the fittings are installed by a qualified electrician, ensuring the installation complies with current IEE wiring regulations and local building control.
- Always switch off the mains supply before installation, maintenance, or any handling of the downlight.
Setup Instructions
1. Download the MOES App
Download the official MOES App from your device's app store or scan the QR code provided in the original manual for direct access. While Tuya Smart/Smart Life App still works, the MOES App is highly recommended for enhanced compatibility and features.
2. Registration or Login
- Download and open the "MOES" Application.
- Enter the Register/Login interface. Tap "Register" to create a new account by entering your phone number to get a verification code and then set a password.
- If you already have a MOES account, choose "Log in" and enter your credentials.
3. Connect to the ZigBee Hub
Before proceeding, ensure you have connected to a 2.4G WiFi network and have a ZigBee hub integrated into your MOES App.
The downlight needs to be set to flash to enter pairing mode. Follow these steps:
- Step 1/2: Power Cycle
Turn the light ON-OFF-ON-OFF-ON. Ensure the time interval between switching is not too short. The light should be OFF when you start the sequence and ON at the end. - Step 2/2: Confirm Flashing
Confirm that the downlight is now rapidly flashing (approximately 2 times per second). This indicates it is in pairing mode.
4. Add the Device
In the MOES App, navigate to your ZigBee gateway. Follow the on-screen instructions to "Add subdevice". Select the option indicating that the "LED is already blinking". The configuration process typically takes about 10-12 seconds, depending on your network conditions.
Once the device is successfully added, you can edit its name. Click "Done" to enter the device page and begin controlling your new smart downlight.
Operating Instructions
Brightness and Color Temperature Adjustment
The MOES Smart Downlight offers 1%-100% brightness adjustment and a color temperature range from 2700K (Soft White) to 6500K (Cool White), including RGB color options. Use the MOES App to precisely control these settings to create your desired ambiance.
Voice Control
Integrate your downlight with Amazon Alexa or Google Home for convenient voice control. Simply link your MOES account to your smart assistant and use commands like "Hello Google/Alexa, reduce the brightness by 20%."
App Remote Control
Control your downlight from anywhere using the MOES App on your smartphone. Adjust colors, brightness, set scenes, and schedule timers with ease.
Maintenance
To ensure optimal performance and longevity of your MOES Smart LED Downlight, follow these general maintenance guidelines:
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the surface of the downlight. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Inspection: Periodically check for any loose connections or visible damage. If any issues are found, consult a qualified electrician.
- Environment: Install the downlight in an environment free from excessive moisture, dust, and extreme temperatures to prevent damage.
Troubleshooting
If you encounter problems installing or operating your device, please review the product data sheet for detailed troubleshooting steps. A common issue is the device not entering pairing mode correctly. Ensure you follow the ON-OFF-ON-OFF-ON sequence precisely and confirm the rapid flashing indicator.
For further assistance, you may refer to the online resource: https://www.moestech.com/blogs/news/zb-tdd9-rcw
Specifications
The following table details the specifications for the MOES ZigBee Smart LED Downlight (Model ZL6095TD):
| Feature | Specification |
|---|---|
| Model | ZL6095TD |
| Product Size | Ø115mm*59mm |
| Color Temperature | 2700K-6500K RGB |
| Wattage | 8.5W (Note: 9W and 12W variants are available) |
| Lumens | 1055lm |
| Voltage | AC110-240V |
| Wireless Protocol | ZIGBEE |
| Beam Angle | 120° |
| Frequency Band | 2.402-2.480GHz |
| Maximum Radio Transmit Power | <+16dBm |
Downlight Comparison (Wi-Fi vs. ZigBee)
For a specific 9W ZigBee model, refer to the image below:
Product packaging and regulatory marks:
Warranty and Support
Warranty Instructions
Products are covered by a 24-month warranty, effective from the date of purchase by a retail customer. To exercise warranty rights, the purchaser must present a warranty card and proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase).
If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and return it to the place of purchase for after-sales maintenance. If the product is damaged due to personal reasons, a maintenance fee may be charged.
The warranty does not cover:
- Mechanical damage caused by the user's fault and product defects resulting from such damage.
- Damage caused by improper use of the product.
- Removal of the warranty seal or serial number from the product.
- Actions taken to eliminate physical defects outside of authorized service.
- Use of non-original parts and consumables.
- Defects due to natural wear and tear during use.
Recycling Information
All products marked with the WEEE Directive 2012/19/EU symbol must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment. Correct disposal and recycling help prevent potential negative consequences for the environment and human health. Contact your installer or local authority for information on collection points.
Declaration of Conformity
WENZHOU NOVA NEW ENERGY CO., LTD declares that the radio equipment type ZL6095TD complies with Directives 2014/53/EU, 2014/35/EU, 2014/30/EU, and 2011/65/EU. The full text of the EU declaration of conformity is available at: https://www.moestech.com/blogs/news/zb-tdd9-rcw
Manufacturer and Contact Information
Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com
UK Representative (EVATOST CONSULTING LTD):
Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: contact@evatost.com
EC Representative (AMZLAB GmbH):
Address: Laubenhof 23, ESSEN 45326
Email: info@amz-lab.de
Tel: +491745298066
User Tips
- Upon receiving your downlights, carefully inspect the packaging and the products themselves for any damage that might have occurred during transit.