DIBILUN Radar/Human Infrared Sensing LED Ceiling Light

Contents

DIBILUN Radar/Human Infrared Sensing LED Ceiling Light

User Manual

1. Introduction

Thank you for choosing the DIBILUN Radar/Human Infrared Sensing LED Ceiling Light. This product is designed to provide efficient and automatic lighting for various indoor and semi-outdoor spaces such as entrances, balconies, corridors, and hallways. Featuring advanced radar and human infrared sensing technology, it offers instant illumination upon detection of movement and turns off automatically after a period of inactivity, promoting energy saving and convenience. Its 'Three-Proof' design ensures durability against dust, moisture, and mosquitoes.

DIBILUN Radar/Human Infrared Sensing LED Ceiling Light highlighting radar probing, human induction, and anti-fog, dust-proof, mosquito-proof features.

Main product features: Radar probing, Human induction, Anti-fog, dust-proof, and mosquito-proof.

2. Safety Information

  • Always turn off the power supply at the circuit breaker before installation, maintenance, or cleaning.
  • Installation should be performed by a qualified electrician in accordance with local electrical codes.
  • Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
  • Ensure the mounting surface is structurally sound and can support the weight of the fixture.
  • This product is designed for hard-wired installation only. Do not attempt to power it with batteries.
  • Keep the product away from flammable materials.
  • Do not expose the product to direct water spray or immersion unless specifically rated for such conditions (IP44 rating indicates protection against solid objects over 1mm and splashing water).

3. Package Contents

Please check the package for the following items:

  • 1 x DIBILUN LED Ceiling Light Fixture
  • 1 x Lamp Holder/Mounting Bracket
  • Expansion Screws
  • Self-tapping Screws
  • User Manual (this document, or refer to the PDF version online)

4. Specifications

Feature Specification
Brand Name DIBILUN
Item Type Ceiling Lights
Body Material Plastic
Material PP/ABS+PP
Power Source AC
Voltage AC85-265V
Wattage Options 12W, 15W, 18W, 20W, 30W, 40W (Human/Radar sensing variants)
Luminous Flux 249-2000 LM (up to 2200LM for 30W model, varies by wattage)
Color Temperature 6500K (Cold White). Other options like 3000K and 4000K may be available depending on model.
Light Source LED (e.g., 72 x 2835 LED Chips for some models)
Sensing Technology Radar Sensor / Human Infrared Sensing (PIR)
Sensing Angle 120°
Sensing Range 5-8 meters (approx. 10 feet from ceiling)
Delay Time Approximately 30 seconds after leaving
Is Dimmable No
Is Smart Device No
Is Bulbs Included Yes (integrated LED)
Protection Rating IP44 (Dustproof, Moisture-proof, Anti-Mosquito)
Certifications CCC, CE, ROHS, FCC
Dimensions (approx.) Varies by wattage. E.g., 15W: 118mm (Dia) x 60mm (H); 20W: 25.5cm (Dia) x 5cm (H); 30W: 31cm (Dia) x 5cm (H)

Note: Specifications may vary slightly depending on the specific model (wattage) purchased. Please refer to the product packaging for exact details.

5. Installation

The DIBILUN LED Ceiling Light is designed for easy, self-contained installation. Please follow these steps carefully:

  1. Step 1: Fix the Lamp Holder

    Secure the lamp holder (mounting bracket) to your ceiling or wall using the provided expansion screws and self-tapping screws. Ensure the holder is firmly attached to a stable surface.

    Diagram showing Step 1 of installation: fixing the lamp holder to the ceiling or wall with screws.

    Step 1: Fixed the lamp holder with screws.

  2. Step 2: Connect Wiring and Attach Lamp

    Connect the electrical wires from your ceiling to the terminals on the lamp fixture. Ensure all connections are secure and insulated. Once wired, carefully align the lamp fixture with the installed holder and put the lamp into the holder, securing it in place (e.g., by twisting or clipping, depending on the model's design).

    Diagram showing Step 2 of installation: clipping the ceiling lamp into the fixed holder.

    Step 2: Put the lamp into the holder.

Important: This light is hard-wired and does not operate on batteries.

Image indicating hard-wired installation with a green checkmark and battery operation with a red cross.

Confirming hard-wired installation.

6. Operating Instructions

The DIBILUN LED Ceiling Light features intelligent motion sensing for automatic operation:

  • Automatic Illumination: The light will automatically turn on (0-second induction) when it detects human movement within its sensing range (5-8 meters / 10 feet) and sensing angle (120°). This function is primarily active during dark evening hours.

    Diagram showing a person approaching the light, which automatically turns on, and then the light automatically extinguishing after 30 seconds when the person leaves.

    Automatic light operation: turns on when detected, turns off after 30 seconds.

  • Continuous Lighting: If continuous movement is detected within the sensing range, the light will remain on. It will only turn off after approximately 30 seconds of no further motion.

  • Daytime Operation: The light is designed not to work during daytime hours when there is sufficient ambient light, further contributing to energy savings.

    Illustration showing the light not working during the day and working in the evening, with diagrams for turning on, staying on with movement, and turning off after a delay.

    Light operation modes: Daytime (not working), Evening (working), and delay time.

7. Maintenance

  • Cleaning: To clean the light fixture, ensure the power is off. Use a soft, dry cloth to wipe the surface. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by drying. Do not use abrasive cleaners or solvents.
  • No User-Serviceable Parts: The LED chips are integrated and not replaceable by the user. Do not attempt to open the fixture.
  • Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.

8. Troubleshooting

  • Light does not turn on:

    • Check if the power supply is connected and turned on.
    • Ensure it is dark enough for the sensor to activate. The light will not operate in bright conditions.
    • Verify that there is movement within the sensing range and angle.
    • Check electrical connections for looseness or damage.
  • Light stays on constantly or turns on unnecessarily:

    • Ensure there are no continuous movements (e.g., pets, swaying curtains, or objects) within the sensing range.
    • The sensor might be too sensitive for the environment. Some users have noted high sensitivity, even detecting movement behind thin walls. This product does not offer adjustable sensitivity. Consider the installation location carefully to avoid unwanted triggers.
    • Check for heat sources or air currents that might trigger the sensor.
  • Light flickers:

    • Check for unstable power supply.
    • Ensure all wiring connections are secure.

9. User Tips

  • Easy Installation: Users have found the light easy to attach and detach, making installation straightforward.
  • Energy Saving: The motion-sensing feature, combined with operation only during dark hours, significantly contributes to electricity savings.
  • Bright Illumination: The light provides bright illumination, suitable for various areas requiring clear visibility.
  • Placement Consideration: Due to the sensor's sensitivity, consider installing the light in areas where broad detection is desired, or be aware that it might detect movement through thin partitions.

10. Frequently Asked Questions (FAQ)

No specific FAQs are available at this time. For common issues, please refer to the Troubleshooting section.

11. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. A detailed user manual in PDF format may also be available for download from the seller's product page.

You can find the PDF user manual here: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.