ILIFE A30 Pro

Contents

ILIFE A30 Pro Robotic Vacuum Cleaner User Manual

Model: A30 Pro | Brand: ILIFE

ILIFE A30 Pro robot vacuum cleaner with self-empty station, highlighting LiDAR Navigation, 2-in-1 Vacuum and Mop, and 5000 Pa Power Suction.

ILIFE A30 Pro robot vacuum cleaner with its self-empty station, highlighting features like LiDAR Navigation System, 2-in-1 Vacuum and Mop, and 5000 Pa Power Suction.

1. Introduction

Dear Customer,

Thank you for purchasing the ILIFE A30 Pro Robotic Vacuum Cleaner! You've joined the millions of people cleaning with robots - the smartest way to do it.

Please take a few moments to read through this manual and familiarize yourself with your robot to achieve the best performance. If you encounter any issues with your robot, feel free to contact our customer service or visit our website at www.iliferobot.com for further assistance.

Enjoy comprehensive cleaning every day! Best regards, ILIFE Innovation

2. What's in the Box

The package includes the following components:

  • Robot Vacuum
  • Self-Empty Station
  • Dust Bags (x5)
  • Mop Cloth Bracket Assembly
  • Extra Side Brush
  • Remote Control
  • High Performance Filter
  • Cleaning Brush
  • User Manual

Note: Product illustrations in this manual are for reference only. Due to updates and improvements, actual products may differ slightly from illustrations.

3. Technical Specifications

Robot

Specification Details
ModelA30 Pro
Dimensions330 x 330 x 95 mm
Battery TypeLi-ion
Charging Time< 300 minutes
Dustbin Capacity0.2 L
Water Tank Capacity0.2 L
Net Weight2.7 kg

Self-Empty Station

Specification Details
Dimensions285 x 145 x 253 mm
Rated Input220V-240V ~ 50/60 Hz
Rated Output19V = 0.6A
Dust Bag Capacity2.5 L
Net Weight2.0 kg

Note: Specifications are subject to change without notice as we continuously improve our products.

4. Product Overview

Robot Components

The robot vacuum consists of various components for navigation, cleaning, and interaction:

  • Top View: Features an Obstacle Sensor, Start/Pause Button, and LiDAR Sensor.
  • Bottom View: Includes Cliff Sensors, Side Brush, Side Wheels, Nose Wheel, Battery Compartment, 2-in-1 Roller Brush, and a 2-in-1 Dustbin & Water Tank.
  • Side View: Shows the Charging Pins and Water Tank Release Button.

Water Tank Assembly

The water tank assembly is comprised of several parts for mopping functionality:

  • Primary Filter
  • Sponge Filter
  • High Performance Filter
  • Water Inlet Plug
  • Dust Outlet
  • Mop Bracket
  • Mop Cloth

Note: When filled with water, the robot's ability to climb over obstacles may be slightly reduced.

Self-Empty Station Components

The self-empty station includes:

  • Top Cover
  • Status Indicator Light
  • Dust Inlet
  • Dust Bag
  • Charging Pins
  • Lens Sensor

Robot Button and Indicator Lights Instruction

Button Operation Function
PowerPress and hold 2 secondsPower on
Short pressStart/Pause cleaning
Press and hold 3 secondsPower off
Quick double pressesReturn to charging dock
Press and hold 25 secondsSystem reset

Robot Indicator Lights Instruction

Light Color Status Description
GreenSolidSufficient battery
BlinkingStandby mode
OrangeBlinkingLow battery
Blinking slowlyCharging
RedFlashingError

Self-Empty Station Indicator Lights Instruction

Light Color Status Description
GreenSolidRobot fully charged
Blinking slowlyThe station is powered on
OrangeBlinkingDust collection in progress
Blinking slowlyRobot charging
RedFlashingNo dust bag
OffNo lightStandby/sleep mode

Remote Control Guide

Before using the remote, insert two AAA/R03 batteries. Remove the batteries if not used for a long time.

Button Function
PowerWake the robot from sleep / Start or pause cleaning
Direction (Up, Down, Left, Right)In standby mode: Forward, Left, Right (Not functional during running)
SuctionSwitch Suction Level by Each Press: Standard → Strong → Max → Silent → Standard
Path ModeStarts standard zigzag cleaning across the entire area
Edge ModeCleans along walls and furniture edges
Spot ModeDeeply cleans a 1.5m × 1.5m area in a spiral pattern
HomeSend the robot back to the charging dock manually

5. Getting Started

Important Pre-Cleaning Notes

Frequent use helps the robot learn your home layout for more efficient path planning and reduced missed spots. Follow these guidelines before each use to protect your home and maximize the robot's cleaning efficiency:

  • Remove loose items from the floor: Clear cables, clothing, or small objects that could get tangled in the wheels or brushes.
  • Fold the rug's tassel trim underneath: Prevent tangling during cleaning. Avoid using on high-pile or thick rugs (>18mm or 0.71").
  • Block off dangerous zones: For areas like fireplaces, vents, or staircases, place physical barriers or set "No-Go Zones" in the app.
  • Avoid use on floor with excessive water: Avoid vacuuming large amounts of water as it will potentially damage the robot.
  • Obstacle height limit: The robot can climb over thresholds up to 20mm (0.79").
  • Cliff sensor limitations: Although the robot includes anti-drop sensors, performance may decrease on dark carpets or reflective surfaces, or if the sensors get stained. Use physical barriers as needed.

Installing and Using the Self-Empty Station

Installation Steps

  • Placement Guidelines:
    1. Place the station on a hard, flat surface against a wall.
    2. Ensure there are no obstacles within 1.5 meters in front and 0.5 meters on both sides.
    3. Avoid placing it in areas with strong sunlight or reflective surfaces.
    4. Keep it away from places where pets sleep to avoid noise disturbance.
  • Power Connection: Plug in the power cable. Once powered, the station's indicator light will turn on.
  • Dust Bag Installation:
    1. Open the top cover of the station.
    2. Insert the dust bag with the small hole facing up and press it into place firmly.
    3. Close the cover. The green light will begin blinking slowly, indicating standby mode.

How Self-Emptying Works

Self-Emptying Triggered Automatically: Once the robot returns to the station and the charging pins align for 3 seconds, the station automatically starts dust collection. The inside fan motor runs for about 15 seconds, indicated by a blinking orange light, and the station returns to standby after finishing.

Charging the Robot

Charging Steps

  • Proper Placement: Align the robot with the charging pins on the station. When connected properly, the robot's orange charging light will blink slowly, indicating it is charging.
  • Charging Completes: When all indicator lights turn off, the battery is fully charged.

Tip: Recharge the robot after each use to extend battery life.

Important Notes

  • In Daily Use:
    1. Make sure the charging pins on the robot and station remain clean to avoid poor contact.
    2. Store the robot on the station with the station powered on.
  • When Not in Use (Long-term Storage): Fully charge the robot, turn it off (press and hold power for 3 seconds), and store it in a dry, ventilated place.

Installing and Using the Water Tank & Mop

Installation Steps

  • Remove the Water Tank: Press the water tank's release button and pull the tank backward to remove it.
  • Fill the Water Tank: Open the rubber plug on the tank and fill with clean water. Use purified water to reduce limescale buildup. Reseal the plug tightly to prevent leakage.
  • Attach the Mop Cloth: Smooth the mop cloth onto the bracket and use velcro to secure it. Align the bracket with the bottom of the tank and slide it in until it clicks into place.
  • Start Mopping: Reinstall the tank into the robot. The robot will automatically detect the mop and switch to mop mode.

Important Notes

  • Where Not to Use Mopping Mode:
    • Do not use the mop on carpets. For best practice, zone out the carpet on the app while mopping.
    • Do not use hot water or cleaning agents (it may damage or clog the tank).
  • Maintenance Tips:
    • Monitor water levels during mopping; refill when low.
    • After mopping, remove the mop and wash/dry it to avoid mildew or odors.

6. Using the ILIFE Clean App

To access all features, it's recommended to control the robot through the ILIFE Clean App.

Network Compatibility: Supports 2.4GHz or dual-band 2.4GHz/5GHz networks. Does not support 5GHz-only networks.

Downloading the App

Step-by-Step Setup

  1. Download the App: Scan the QR code or search for "ILIFE Clean" in your app store.
  2. Register/Login: Open the app and sign up or log in with your credentials.
  3. Enable Pairing Mode: Press and hold the AUTO button on the robot for 6 seconds. You'll hear "WiFi pairing started" and the WiFi light will start blinking slowly.
  4. Add Device: Tap "Add Device" or the "+" icon in the top right corner to begin connecting.

Wi-Fi Pairing Modes

Bluetooth Pairing Mode

Enable Bluetooth on Your Phone.

Pairing Steps
  1. Go to your phone's settings, turn on Bluetooth and enable Bluetooth permission for ILIFE Clean app.
  2. Return to the ILIFE Clean app — the device will appear automatically and tap "Add" to begin.
  3. Select your 2.4GHz Wi-Fi network and enter the password to go next.
  4. The device starts downloading.
  5. Device is added successfully and done.

AP (Access Point) Pairing Mode

  1. In the app, choose your specific robot model.
  2. Choose your 2.4GHz Wi-Fi network and enter the password.
  3. Go to your phone's Wi-Fi settings and connect to a network that starts with "SmartLife". Return to the app once connected.
  4. Wait for the app to complete the device connection process.

Map Management

How to Access

Open the ILIFE Clean app → Tap "Settings" → Select "Manage Map"

Available Functions

  • Create/Switch Maps: Perfect for multi-floor homes (up to 5 maps supported).
  • Reset/Delete Maps: Delete or reset a saved map.

Setting No-Go and No-Mop Zones

Tip: It's recommended to complete a full-home mapping before setting restricted zones.

Zone Types

  • No-Go Zone: Robot avoids both vacuuming and mopping in this area.
  • No-Mop Zone: Robot vacuums but does not mop in this area.
  • Virtual Wall: Acts as an invisible barrier the robot won't cross.

How to Set Zones

  1. Go to "Forbidden Edit" in the app.
  2. Tap set restricted areas.
  3. Draw your desired zone and select the type.
  4. Save "Settings".

Note: These features are for convenience and do not replace physical barriers in high-risk areas like staircases.

Scheduled Cleanings

Before You Start

Ensure the charging station remains powered on. The robot should have sufficient battery charge.

How to Schedule

  1. Open the ILIFE Clean app.
  2. Go to Scheduled Cleaning.
  3. Set the desired time and recurrence (e.g., daily or weekly).
  4. Choose your preferred cleaning mode.
  5. Confirm your settings.

After Scheduling

  1. The robot will start cleaning automatically at the scheduled time.
  2. After cleaning, it will return to the charging station.

Selecting Cleaning Modes

Start / Pause Cleaning

  • In the App: Tap the "Start/Pause" button.
  • On the Robot: Press the power button once to start or pause cleaning.

Tip: It's recommended to create a full-house map before using room-by-room or zone cleaning.

Smart Cleaning Mode

  1. Tap "Start" in the app.
  2. The robot will leave the station and automatically plan a cleaning route.
  3. It will return to the station when cleaning is complete.

Room Cleaning Mode

Select specific room in the app for targeted cleaning.

Note: You can customize suction power, water volume, and cleaning sequence per room via the Cleaning Plan Customization settings.

Zone Cleaning Mode

  1. Draw a rectangular zone on the map in the app.
  2. Set the size and number of cleaning passes (e.g., clean 2x).
  3. The robot will clean that area and return to the station.

Spot Cleaning Mode

  1. For localized messes like pet food or snack spills.
  2. Tap the target spot on the map.
  3. The robot will deep-clean a 1.5m × 1.5m area in a spiral pattern, then return to base.

Do Not Disturb Mode

  • Ideal for nighttime or rest hours: In the app, go to "Settings" → "Robot Settings" → Do Not Disturb.
  • Once enabled, the robot will:
    • Pause auto-charge and auto-resume cleaning.
    • Stop self-emptying automatically.
    • Shut down voice prompts.

Dust Collection Frequency

Adjust in the app via: "Settings" → "Dust collection" → Frequency. Options include: Collect dust after each sweep, Collect dust after two sweeps, etc.

Note: If the robot returns but fails to start self-emptying automatically, it might be because the last cleaning task was less than 5 minutes.

Cleaning Plan Customization

  • Suction & Water Level Adjustment: In the app via: "Cleaning Plan" → Adjust suction power (Silent / Standard / Strong / Max) and water flow (Low / Medium / High).
  • Per-Room Customization: In the app via: "Cleaning Plan" → "Plan 1 / Plan 2" Set specific suction, water flow, number of passes, and cleaning sequence for each room.

7. Voice Assistant Setup (Alexa/Google Assistant)

Before setting up, please make sure:

  1. A30 Pro is fully charged and connected to ILIFE Clean app.
  2. You own a supported voice assistant device (e.g., Amazon Echo, Google Nest). These devices are sold separately.
  3. Alexa or Google Home app is installed on your mobile device.
  4. You have an active account for your voice assistant.

Alexa Setup

  1. Connect your robot to the ILIFE Clean app.
  2. Open the Alexa app → Tap Skills & Games → Search Smart Life.
  3. Tap "Enable to Use".
  4. Enter your ILIFE Clean account credentials and authorize access.
  5. Tap "Authorize".
  6. Alexa will search and link your robot automatically.

8. Cleaning & Maintenance

Always turn off the robot and unplug the power adapter before performing maintenance.

Component Clean Frequency Replace Frequency
Mop ClothAs neededEvery 3-6 months
DustbinWeeklyN/A
FilterN/AEvery 1-1.5 months
Side BrushWeeklyEvery 3-6 months (or if damaged)
Roller BrushWeeklyEvery 6 months
Side WheelsMonthlyN/A
Cliff SensorsMonthlyN/A
Charging ContactsMonthlyN/A
Disposable Dust BagN/AEvery 1-1.5 months (or if damaged)

Cleaning the Dustbin and Filter

  1. Press the release button to remove the 2-in-1 dustbin.
  2. Open the dustbin lid.
  3. Empty the dustbin.
  4. Remove the filters and rinse the dustbin with water.
  5. Dry thoroughly with a clean cloth.
  6. Replace the filter if necessary and reinsert the dustbin.

Note: The filter is unwashable.

Cleaning the Water Tank and Mop Cloth

Mop Cloth

  1. Remove the mop bracket and peel off the cloth.
  2. Rinse with clean water and let it air-dry completely.

2-in-1 Water Tank

  1. Open the rubber plug and drain any leftover water.
  2. Wipe the tank clean and let it dry thoroughly.

Cleaning the Roller Brush

  1. Unlock and lift the brush cover.
  2. Remove the roller brush by pulling it upward.
  3. Use the provided tool to cut away tangled hair or debris.
  4. Rinse the roller brush and cover with water.
  5. Air-dry those components.
  6. Reinstall the roller brush and snap the cover back into place.

Cleaning the Side Brushes and Side Wheels

Side Brushes

Unscrew and remove the brushes. Clear hair or debris wrapped around them.

Side Wheels

Check and remove any obstructions caught in the wheels.

Cleaning Sensors and Charging Pins

Cliff Sensors

Use a soft brush to gently clean the sensors on the underside of the robot.

Charging Pins

Wipe both the robot's and station's charging pins with a dry cloth to maintain charging efficiency.

Replacing the Dust Bag and Cleaning the Station

Replace Dust Bag

  1. Open the top cover.
  2. Remove and dispose of the used dust bag.
  3. Install a new one with the small hole facing up.

Reminder:

  1. Damaged bags can impair performance and damage the station. Check regularly.
  2. Check the metal filter at the inside bottom of the station in case of clogging.

Clear the Dust Path

If the suction is weakened or blocked:

  1. Unplug the station.
  2. Flip it over and unscrew the transparent duct cover.
  3. Remove debris and reinstall the cover.

Battery Care and Activation

For Long-Term Storage

  1. Charge the robot fully.
  2. Power it off (hold the power button for 3 seconds).
  3. Store in a dry, ventilated place. Recharge every 3 months to avoid battery degradation.

Battery Activation (After Deep Discharge or Long Inactivity)

  1. Align the robot on the charging station.
  2. Charge it for 3 minutes and then remove it. Repeat this process 3 times.
  3. Then charge continuously for 5-6 hours until it is fully charged when the indicator turns off.

9. Troubleshooting

Voice Alerts & Error Codes

When a malfunction occurs, the robot's indicator light will flash red and a voice alert will play. Use the table below to identify and resolve the issue.

Voice Alert Possible Cause Solution
Side wheel/Side brush blockedHair or debris is caughtCheck and clean side wheels/brushes
Please check the cliff sensor/Bumper is stuckBumper gets caught or stained/cliff sensors get stainedClear and clean those components
Robot is stuckTrapped by cords or obstaclesRemove the obstruction
Gyroscope initialization failedGyroscope failed to position due to robot skiddingRemove and relocate the robot

Water Tank / Mopping Issues

Issue Possible Cause Solution
Water tank leakingRubber plug not sealedReseal the plug
No water output while moppingThe water tank not installed properly or emptyReinstall or refill the tank
Mop cloth falling offVelcro not attached well or worn outSecure the mop cloth or replace it

Self-Empty Station Issues

Issue Possible Cause Solution
Station not workingDust bag not installed properly or clogging happensReinstall or replace dust bag, or refer to 'Clear the Dust Path' section to clear inside filter and dust path
Indicator light blink orange but the dust is not emptyingRobot not properly dockedAdjust position to align charging pins

App Issues

Issue Possible Cause Solution
Can't connect to the appIncorrect router username/passwordRe-enter correct Wi-Fi credentials
Out of Wi-Fi signal coverageMove the robot closer to the router
Robot not in pairing modeHold the power button for 6 seconds until "WiFi pairing" prompt is heard
Incompatible network typeOnly supports 2.4GHz or mixed 2.4/5GHz networks, not 5GHz-only
Wrong app installedUse the QR code or app store to download ILIFE Clean app
Map not generatedThe robot does not start cleaning from stationStart cleaning from charging station
Robot was moved during cleaningAvoid moving the robot in mid of cleaning
Task has not completedLet robot finish the cleaning session and return to the station automatically.

Robot Issues

Issue Possible Cause Solution
Can't return to the stationImproper station placement or power lossPlease refer to 'Installing and Using the Self-Empty Station' section on how to place the station correctly
The robot does not start cleaning from stationSuggest to start from station
Obstructed return path (e.g., door closed)Keep the return path clear
Robot returns before finishingBattery gets low in large areasEnable "Auto Resume" feature in the app
Cleaning coverage may be poor due to complex home layout.Tidy the environment for better navigation
Can't chargeCharging pins not aligned or dirtyAdjust position and clean pins
The station is not poweredEnsure the station is plugged into a power supply.
Battery over-discharged from long storageManually charge 3 times for 3 mins each, then full charge for 5-6 hours
Loud noise during operationBrushes or dustbin clogged; in high suction modeClean components or switch to standard mode
Frequently gets stuckTangled in wires/carpet fringe or get stuck under low furnitureTidy up or use virtual walls in app
Climbing ability is weakened with mop installedRemove the mop bracket, or assist robot over high thresholds if needed
Skipped or repeated cleaning areasThe floor is too much clutteredTidy up the cables, shoes
The robot cannot navigate correctly due to wheel skidding in failure to climb the threshold, or on a slippery floorClose doors to problematic rooms to avoid threshold, avoid waxed floors
Top LiDAR does not work due to dust or foreign objects caught on sensorClean the LiDAR with soft cloth

*If the issue persists:

  1. Press and hold the power button for 3 seconds to turn off, then press for 2 seconds to restart.
  2. If still unresolved, please contact customer support.

10. Safety Information

Important Safety Instructions

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • Remove hazards such as power cords, small items, or loose objects from the floor before cleaning.
  • Fold carpet tassels under the rug and lift hanging curtains or tablecloths off the floor.
  • For staircases or elevated areas, test whether the robot detects edges. Use barriers if necessary.
  • Use only manufacturer-recommended accessories and original rechargeable battery and charging dock.
  • Ensure the voltage matches the specifications on the charging dock.
  • This device is for indoor home use only. Do not use outdoors or in commercial environments.
  • Do not use water to rinse the device or wipe it with a wet cloth.
  • Do not operate the robot on wet or flooded surfaces.
  • Do not use near open flames or fragile items.
  • Keep hair, fingers, and loose clothing away from moving parts and openings.
  • Do not vacuum hard, sharp, flammable, or burning objects.
  • Do not use a damaged charging dock or power cord.
  • Keep the power cord away from heat sources and do not allow the robot to run over it.
  • If the power cord is damaged, have it replaced by a qualified technician.
  • Ensure the dustbin and filter are installed correctly before use.
  • Do not operate in a room where an infant is sleeping.
  • Stop using the device if it has been dropped, damaged, exposed to water, or used outdoors. Contact customer service.

Danger - Critical Safety Warnings

  • Disconnect the product from power if not used for a long period.
  • Remove the battery before cleaning or performing maintenance.
  • Always unplug the charging adapter before maintenance.
  • Warning: Non-rechargeable batteries must not be recharged.
  • Only qualified personnel may replace the battery.
  • Use only the provided auto-empty station (Model: P200) for recharging.
  • Do not power the device via external switches or circuits controlled by utility services.
  • If the power cord is damaged, it must be replaced by the manufacturer or authorized agent.
  • Maintain at least 20 cm distance between the antenna and your body during operation.
  • Frequency bands: Bluetooth 2402-2480 MHz; Wi-Fi 2412-2472 MHz.
  • Maximum RF transmission power: Bluetooth <10 dBm (EIRP), Wi-Fi <20 dBm (EIRP).
  • Before discarding the product, power it off and remove the battery.
  • Dispose of batteries according to local regulations.
  • Do not incinerate the product or battery even if damaged.
  • Use the product only as described in this manual. ILIFE is not responsible for loss or injury from misuse.
  • Not suitable for high-pile carpets or certain dark-colored carpets.

CLASS 1 CONSUMER LASER PRODUCT

Laser model: VP100L

  • Invisible laser radiation
  • Laser energy: Exposure near aperture may cause burns
  • Wavelength: 905nm
  • Output power: 1.5w
  • Frequency: 1MHz
  • Pulse duration: 1.5ns
  • Laser of vacuum cleaner complies with the standard for Class 1 laser products of EN 50689:2021 & EN 60825-1:2014+A11:2021

Laser model: D3A3

  • Invisible laser radiation
  • Laser energy: Exposure near aperture may cause burns
  • Wavelength: 940nm
  • Output power: 6mW
  • Frequency: Steady on
  • Laser of vacuum cleaner complies with the standard for Class 1 laser products of EN 50689:2021 & EN 60825-1:2014+A11:2021

11. User Tips

  • Long-term users appreciate the significant improvements in newer models like the A30 Pro, noting enhanced performance and features.
  • Regularly check and clean charging pins on both the robot and the station to ensure consistent charging.
  • For optimal performance, ensure the self-empty station is placed on a hard, flat surface against a wall, with clear space around it.

12. Warranty and Support

The ILIFE A30 Pro Robotic Vacuum Cleaner comes with a 1-year warranty.

For customer service and support, including warranty claims or technical assistance, please contact:


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.