1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your KHUDAYAROV m04 Weatherproof Mini Audio IP Microphone. This device is designed to add audio functionality to IP cameras that require external audio input, enhancing security monitoring capabilities with high-sensitivity sound capture.
The m04 microphone features a high-sensitive microphone and a built-in 12V power regulator, offering a plug-and-play solution for various outdoor and indoor security applications.
2. Safety Information
- Ensure all power connections are correct before powering on the device to prevent damage.
- Do not expose the microphone to extreme temperatures or harsh chemicals.
- Handle the device with care to avoid physical damage to the microphone capsule or wiring.
- Installation should be performed by individuals familiar with low-voltage wiring and CCTV systems.
3. Package Contents
Each package contains:
- 10 x KHUDAYAROV m04 Mini Weatherproof CCTV Audio Microphones
Note: The IP camera board is not included with this product. If an IP board is required, please acquire it separately.
4. Setup and Installation
The KHUDAYAROV m04 microphone is designed for easy plug-and-play integration with compatible IP cameras. Follow these steps for proper installation:
4.1 Wiring Connections
Identify the wiring on your microphone and connect it to your IP camera's audio input and power supply according to the following scheme:
- Red wire: Connect to Power + (Positive)
- Black wire: Connect to Power - (Negative)
- S- (Black signal wire): Connect to Audio Signal Ground
- S+ (Green signal wire): Connect to Audio Signal Input
4.2 Power Supply
The microphone has a built-in 12V power regulator. Ensure your power source provides between 4V and 14V DC to the microphone's power input wires (Red and Black).
4.3 Placement
Position the microphone in an area where sound capture is desired. Its weatherproof design allows for outdoor installation. For optimal performance, avoid placing it directly next to loud noise sources or in areas with excessive wind.
5. Operating Instructions
Once correctly installed and powered, the KHUDAYAROV m04 microphone operates automatically. It is designed for continuous audio monitoring.
- High Sensitivity: The microphone is extremely sensitive, capable of picking up subtle sounds over a wide area.
- Monitoring Range: It can effectively monitor an area of up to 150 square meters.
- S/N Ratio: A higher Signal-to-Noise ratio ensures clearer audio capture with less background interference.
Refer to your IP camera's manual for instructions on how to access and record the audio feed from the connected microphone.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | m04 |
| Brand Name | KHUDAYAROV |
| Origin | Mainland China |
| Certification | CE |
| Work Voltage | 4-14V DC |
| Work Current | 5mA-60mA |
| Sensitivity | 200mA/ubar |
| Frequency Response | 100-6000Hz |
| Max Output Voltage | 5V-upp |
| Monitoring Range | Up to 150 square meters |
| Dimensions (Mic height) | Approx. 3mm |
7. Maintenance
- Cleaning: Gently wipe the microphone's exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Environmental Protection: While weatherproof, avoid submerging the microphone in water or exposing it to direct, high-pressure water jets.
- Cable Inspection: Periodically check the wiring for any signs of wear, cuts, or damage. Replace if necessary.
8. Troubleshooting
8.1 No Audio Output
- Check Power: Ensure the microphone is receiving power (4-14V DC) and that the red and black wires are connected correctly to Power+ and Power- respectively.
- Check Signal Connections: Verify that the S+ (green) and S- (black) wires are correctly connected to the audio input and ground of your IP camera.
- Camera Settings: Confirm that the audio input is enabled and configured correctly in your IP camera's settings.
- Cable Integrity: Inspect the microphone cable for any damage or breaks.
8.2 Poor Audio Quality / Static
- Interference: Move the microphone away from strong electromagnetic fields or other electronic devices that might cause interference.
- Cable Shielding: Ensure that the audio signal wires are properly shielded and that connections are secure.
- Microphone Placement: Adjust the microphone's position to avoid direct wind noise or echoes from nearby surfaces.
- Power Supply Noise: If using a shared power supply, ensure it is stable and free from electrical noise. Consider a dedicated power supply if issues persist.
9. User Tips
- For optimal outdoor performance, consider placing the microphone under an overhang or in a sheltered spot to minimize direct exposure to heavy rain, even though it is weatherproof.
- When connecting multiple microphones to a single recording system, ensure proper impedance matching and consider using an audio mixer or amplifier if necessary to maintain signal quality.
- Test the audio quality immediately after installation to make any necessary adjustments to placement or camera settings.
10. Warranty and Support
This product comes with a One Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
If the item is found to be defective, please notify the seller within 5 days of delivery for replacement service.
For technical support or warranty claims, please contact your retailer or the manufacturer directly. Provide your model number (m04) and proof of purchase when seeking assistance.
Note: All products are checked and packaged in good condition before dispatch. Buyers are responsible for any tax or VAT under any circumstances.