1. Introduction
Thank you for choosing the GOYOJO Professional Wi-Fi Weather Station. This all-in-one home weather hub features a 7-inch large colored display console and a 7-in-1 solar-powered wireless outdoor weather sensor. It provides intelligent forecasting, wireless monitoring, and APP synchronization for comprehensive weather data.

2. Features
- Perpetual Calendar: Up to Year 2099.
- Network Time Service: Automatic calibration for accurate time.
- Multi-language Day of Week: User selectable in 15 languages (English, German, French, Spanish, Italian, Dutch, Danish, Portuguese, Norwegian, Swedish, Polish, Finnish, Czech, Hungarian, and Slovak).
- Alarms: Two daily alarms with automatic snooze function (OFF or 5~60 minutes).
- Temperature Measurement:
- Indoor: -20°C (-4°F) to 50°C (122°F)
- Outdoor: -40°C (-40°F) to 70°C (158°F)
- Humidity Detection: Indoor and outdoor range of 20% to 95%.
- Comfort Display: Level 5 indoor and outdoor comfort display based on temperature and humidity data.
- Atmospheric Pressure: Measurement range of 600 to 1100 hPa (17.72 to 32.48 inHg or 450 to 825.1 mmHg).
- Rainfall Measurement: Display range of 0 to 9999mm (0-393.6 inches).
- Wind Data:
- Wind Speed: 0 to 180 km/h (0 to 111 mph)
- Wind Direction: 0 to 359 degrees
- Beaufort Wind Scale: Display of 12 levels.
- Light and UV Index:
- Light Intensity: 0 to 128 klux (0 to 1378 kfc)
- UV Index: 0 to 15 level, with Level 5 UVI sun exposure indication.
- Wireless Transmission: 433.92MHz RF transmitting frequency with a range of 100 meters (328 feet) in an open area.
- Smart Connectivity: Connects directly to Wi-Fi network and Tuya Smart System for APP synchronization and data display.
- Display: Level 4 display backlight.
3. Product Components
The GOYOJO Professional Wi-Fi Weather Station includes the following main components:

3.1. Display Console (Main Unit)
The 7-inch color display console shows all weather data and settings. Refer to the image below for a visual guide to its parts and functions.

Part A - Positive LCD Display Elements
- A1: Feels like temperature
- A2: Outdoor wireless channel
- A3: Outdoor temperature
- A4: Wind direction steering wheel
- A5: Outdoor comfort icon
- A6: Outdoor humidity
- A7: Value of wind speed
- A8: Rainfall
- A9: UV index
- A10: Light intensity
- A11: Air pressure
- A12: Beaufort scale
- A13: Time
- A14: Day of the week
- A15: Calendar
- A16: Indoor comfort icon
- A17: Indoor humidity
- A18: Wind direction or gusts or average wind speed
- A19: Indoor temperature
- A20: Weather forecast
Part B - Buttons and Exterior
- B1: “/zZ” Snooze/Light touch location
- B2: “☀” Set and brightness button
- B3: “★” Alarm button “-” button
- B4: “MEM” Up and memory button
- B5: “WIFI” “W” Down and WIFI pairing button
- B6: “☀” Wind button
- B7: “☁” Rain button
- B8: “CH” Channel Switching button
- B9: Hanging hole
- B10: Support frame
- B11: Battery compartment
- B12: USB charging socket
- B13: Power supply socket
3.2. Multi-combination Wireless Remote Sensor (7-in-1 Outdoor Sensor)
This solar-powered sensor collects outdoor weather data. Its components are detailed below.

Part D - Exterior
- D1: Solar panel
- D2: Rain funnel
- D3: Wind cups
- D4: Bubble level
- D5: Temperature | humidity induction box
- D6: Wind Directional Vane
- D7: Reset button
- D8: LED indicator
- D9: Manual transmit signal button
- D10: Battery compartment
- D11: Support rod
- D12: Fixed base
- D13: Socket head cap screws
- D14: Drain vents For rain sensor
- D15: North direction mark
- D16: Rain funnel rotation mark
- D18: Lighting and UV sensors
3.3. Temperature | Humidity Wireless Remote Sensor (Optional)
An additional remote sensor for temperature and humidity can be purchased separately.
Part E - Exterior
- E1: Hanging hole
- E2: LCD display
- E3: LED indicator
- E4: Temperature | Humidity sensing louver
- E5: Battery compartment
- E6: Manual transmit signal button “TX”
- E7: “CHANNEL 1 or 2 or 3” switch
- E8: Reset button
4. Setup Instructions
4.1. Preparation
Before you begin, ensure you have the following items (not included):
- Crosshead screwdriver
- Hex driver for assembly
- 2 (two) AA alkaline or lithium batteries for the weather station console
- 3 (three) AA alkaline or lithium batteries for the multi-combination outdoor sensor
For best results, remove the weather station console and sensors from their packaging and place them together on a table or bench, within easy reach. Keep batteries and screwdrivers nearby. Allow the sensors and station to connect repeatedly by keeping them 0.15-0.3 meters (5-10 feet) apart for at least 15 minutes after installing batteries.
4.2. Download Tuya Smart App
Search for “Tuya Smart” in the iOS App Store or Android Google Play. Download and install the app. Register an account, log in, and connect to the hotspot that the weather station needs to connect to, as a preparation for device pairing.
4.3. Quick Setup Guide
- Insert 3 AA batteries into the multi-combination wireless remote sensor.
- Plug the power cord into the weather station console.
- Open the Tuya Smart App on your mobile phone, register/log in, and follow the prompts to pair the weather station with your Wi-Fi network and server.
- Configure basic settings such as time, date, and units via the App or directly on the product.
- Insert 2 AA batteries into the weather station console. These batteries serve as a backup to retain settings if the power adapter is unexpectedly disconnected.
- After 5 minutes, move the remote sensor to its desired outdoor location.
4.4. Wi-Fi Pairing
After the weather station starts, it will automatically enter paired AP mode, indicated by “00 AP” then “01 AP” on the time bar. Pairing can then begin.
- Open the Tuya app. A window for discovering devices should automatically pop up. Click “Add” to switch to Wi-Fi settings.
- Follow the in-app prompts: set the Wi-Fi name and password. Wait for the pairing process to complete. Once the screen changes, click “Finish” to switch to the main interface, indicating successful pairing.
Note:
- The paired Wi-Fi hotspot must be 2.4GHz. This product only supports 2.4GHz wireless networks.
- If the product does not automatically enter pairing mode when powered on, press and hold the “-” button for more than 3 seconds to manually enter pairing mode.
- After pairing, the weather station will automatically connect to the WLAN, update the network time, and search for signals from remote wireless sensors. The “★” icon will blink for about 3 minutes. If the outdoor wireless sensor is working normally, the host will find its signal within 1-2 minutes. Outdoor temperature and humidity will then be displayed on the main unit.
4.5. Wireless Sensor Connection
The weather station can connect to one multi-combination wireless sensor and up to three additional temperature/humidity wireless sensors (if purchased separately).
- The weather station automatically searches for all wireless sensors within 3 minutes of power-on and registers their IDs. Each sensor generates a random ID.
- In the main display interface, press the “CH” button to cycle through the values of wireless sensors on different channels in the OUT temperature and humidity column.
- Channel Icon Display: The channel icon (where A1 is displayed) shows the number of channels: ★ (multi-combination wireless sensor) | CH1 | CH2 | CH3 (three temperature/humidity sensors) | Loop mode.
- Loop Mode: In loop mode, the display of channel number, temperature, and humidity in the OUT column switches every 5 seconds. If a channel has no signal, it will be skipped. Only temperature and humidity values are converted in loop mode; wind speed, direction, rainfall, etc., are still derived from the multi-combination sensor.
- If the weather station loses sensor signals or a sensor is not connected, the channel value will display as “--”.
- Adding/Replacing a Sensor: Press the “CH” button to switch to the corresponding communication, then press and hold “CH” for more than 3 seconds. The weather station will search for a signal for 3 minutes, and the new sensor will be added. Ensure the sensor is powered on first.
- Low Battery Indication: When the channel icon displays the low voltage icon “⚠”, replace the battery of the corresponding wireless sensor.
5. Operating Instructions
5.1. Time and Unit Settings
To enter the time setting mode, press and hold the “☀” button for 3 seconds. Use the “MEM” or “WIFI” button to adjust values (hold for quick adjustment). Press “☀” to confirm and move to the next item. The device will exit setting mode automatically after 20 seconds of inactivity or by double-clicking the “/zZ” touch position.
Settings order:
- Temperature unit: °C | °F
- Pressure unit: hPa | inHg | mmHg
- Air pressure setting: absolute or relative
- Wind speed unit: km/h | mph | m/s | knots
- Wind degree (angle) or direction (letter) selection
- Rainfall unit: MM | inch
- Light unit: Klux | Kfc | W/m²
- Hour format: 24Hr | 12Hr
- Hour
- Minutes
- Calendar display format: Month/Date | Date/Month
- Year
- Month
- Date
- Week display language (15 countries)
- Initial weather forecast
5.2. Week Language Display
The display supports the following languages for the day of the week:
| Language | Sunday | Monday | Tuesday | Wednesday | Thursday | Friday | Saturday |
|---|---|---|---|---|---|---|---|
| English (ENG) | SUN | MON | TUE | WED | THU | FRI | SAT |
| German (GER) | SON | MON | DIE | MIT | DON | FRE | SAM |
| French (FRE) | DIM | LUN | MAR | MER | JEU | VEN | SAM |
| Italian (ITA) | DOM | LUN | MAR | MER | GIO | VEN | SAB |
| Spanish (SPA) | DOM | LUN | MAR | MIE | JUE | VIE | SAB |
| Portuguese (POR) | DOM | SEG | TER | QUA | QUI | SEX | SAB |
| Dutch (DUT) | ZON | MAA | DIN | WOE | DON | VRI | ZAT |
| Danish (DAN) | SON | MAN | TIR | ONS | TOR | FRE | LOR |
| Norwegian (NOR) | SON | MAN | TIR | ONS | TOR | FRE | LOR |
| Swedish (SWE) | SON | MAN | TIS | ONS | TOR | FRE | LOR |
| Polish (POL) | NIE | PON | WTO | SRO | CZW | PIA | SOB |
| Finnish (FIN) | SUN | MAN | TII | KIS | TOR | PER | LAU |
| Czech (CZE) | NED | PON | UTE | STR | CTV | PAT | SOB |
| Hungarian (HUN) | VAS | HET | KED | SZE | CSU | PEN | SZO |
| Slovak (SVK) | NED | PON | UTO | STR | STV | PIA | SOB |
5.3. APP Setting Unit
Once the weather station is paired and connected to Wi-Fi, its time will automatically calibrate to the local current time. To change units via the app, click the settings icon “⚙️” on the APP Home screen, then navigate to the “Alarm Setting” menu bar to set the desired units.
5.4. Alarm and Snooze Settings
To enter the alarm and snooze setting mode, press and hold the “★” button for 3 seconds. Use the “MEM” or “WIFI” button to adjust values (hold for quick adjustment). Press “★” to confirm and move to the next item. The device will exit setting mode automatically after 20 seconds of inactivity or by double-clicking the “/zZ” touch position.
Settings order:
- Alarm 1 hour
- Alarm 1 minutes
- Alarm 1 repeat: M-F | S-S | M-S
- Alarm 1 snooze time: 5 to 60 minutes | OFF
- Alarm 2 hour
- Alarm 2 minutes
- Alarm 2 repeat: M-F | S-S | M-S
- Alarm 2 snooze time: 5 to 60 minutes | OFF
Alarm Function Control:
- Press and release the “★” button once to view Alarm 1, twice for Alarm 2, and a third time to exit viewing mode.
- While viewing an alarm, press and release the “MEM” button to toggle its alarm function on or off.
- When an alarm is active, the “★” or “★” symbol will be displayed, along with the relevant repeat icon (“M-F” | “S-S”).
- The alarm will sound for 2 minutes. If not deactivated, it will repeat automatically after 24 hours. The alarm sound is a rising crescendo over 2 minutes, changing volume 4 times.
Snooze Function:
- When the alarm sounds, touch and release the “/zZ” touch button to stop the alarm and enter snooze mode. The alarm will sound again after the set snooze time.
- To exit snooze mode, press any button except “/zZ”, or touch and hold “/zZ” for more than 3 seconds.
5.5. Temperature, Humidity, Light Intensity, UV Index, and Air Pressure Readings
- Press the “WIFI” button to switch the display between “feels like” temperature, dew point temperature, heat index, and wind chill. These values are derived from the multi-combination wireless remote sensor.
- Press the “MEM” button to view the maximum and minimum records for temperature, humidity, and light intensity.
- To clear all history for indoor temperature, humidity, outdoor remote temperature, humidity, light intensity, feels like temperature, dew point temperature, heat index, and wind chill index, press and hold the “WIFI” button for 3 seconds while viewing max/min values. Cleared values will initially display as “--” before updating with current readings.
- Trend indicators (↑ rising, ↓ dropping, – unchanged) are provided for indoor temperature, humidity, outdoor remote temperature, humidity, light intensity, feels like temperature, and air pressure.
- UV Index status indications: LOW (0 to 2), MODERATE (3 to 5), HIGH (6 to 7), VERY HIGH (8 to 10), EXTREME (11+).
5.6. Wind Readings and History
- In the main display interface, press and hold the “☀” button for 3 seconds to cycle the display between wind direction, gusts, or average wind speed.
- WIND SPEED: Average speed over the past 30 seconds.
- GUST WIND SPEED: Maximum average wind speed every 3 seconds for 30 seconds.
- AGE WIND SPEED: 10-minute average wind speed.
- WIND DIRECTION: Displayed in letters or degrees.
- Each conversion is accompanied by a “Bl” sound. To switch again, release and then press and hold the button.
- To clear all history of wind speed, press and hold the “☀” button for 3 seconds while viewing wind speed history. The reading will reset to the current wind speed.
5.7. Rain Readings and History
- In the main display interface, press and hold the “☁” button for 3 seconds to toggle the display between cumulative rainfall or rate of rainfall.
- Press and release the “☁” button to view rain history in the following order: EVENT | HOURLY | DAILY | WEEKLY | MONTHLY | YEARLY | TOTAL.
- EVENT: Cumulative rainfall for the current event. An event ends if there’s no rain for more than 30 minutes.
- HOURLY: Total rainfall for the current hour.
- DAILY: Total rainfall for today.
- WEEKLY: Total rainfall for the current week.
- MONTHLY: Total rainfall for the current month.
- YEARLY: Total rainfall in the current year.
- TOTAL: Cumulative value since the weather station was started (no time stamp).
- To clear all history of rain, press and hold the “☁” button for 3 seconds while viewing rain history. The reading will reset to 0 mm (in).
5.8. Recording Curve in APP
Through the Tuya Smart App, you can view historical changes of various detected data reported by the weather station. Click the “⚙️” icon on the Home screen to enter, and you can view daily, weekly, monthly, and yearly change curve charts for temperature, humidity, air pressure, wind, rain, light intensity, and UV index.
5.9. Weather Forecast
The weather station calculates a weather forecast for the next 12 hours based on barometric pressure trends. This provides an approximate indication of local weather development. Always cross-reference with local professional weather forecasting services for the most authoritative information.

The weather station displays the following weather icons:
- Sunny
- Mostly Cloudy
- Cloudy
- Rainy
- Thunder Rainy
- Snow (appears only if outdoor temperature is below -4°C (25°F) and forecast is rainy or thunder rainy)
After 7-10 days of air pressure calibration, the weather forecast accuracy will stabilize at 70%-75%.
5.10. Background Lighting
- Battery Powered: Press the “/zZ” button for 15 seconds of backlight.
- Power Adapter Connected: The backlight is always on. Press the “☀” button to adjust brightness (5 states: 4 brightness levels and OFF). Press “/zZ” for 20 seconds of maximum brightness.
- Night Mode: Press and hold the “/zZ” button for 3 seconds to enter night mode settings. You can set night mode on/off, brightness, and entry/exit times. When night mode is active, the “☽” icon is displayed.
- APP Setting Backlight: Backlight settings can also be configured via the Tuya Smart App.
5.11. Low Battery Indication
If the “Indoor sensor” column displays the battery icon “⚠”, it indicates that the weather station’s batteries need to be replaced as soon as possible.
6. Maintenance
6.1. Multi-combination Wireless Remote Sensor Mounting
Proper mounting ensures accurate readings and longevity of your sensor.

- Mount the sensor in an open area, clear for 15 meters (50 feet) in all directions, to ensure unobstructed wind and rain measurement.
- The sensor needs to be mounted on a sturdy platform or bracket, ideally 1.5 meters (5 feet) above the ground.
- Secure the base of the sensor to the platform and the support frame. Tighten the large nut that secures the support rod to the base.
- When installing, adjust the sensor body so that the solar panel faces south. This is crucial for accurate wind direction readings. Use the “N” North Embossed Mark on the top of the sensor (a compass can help verify alignment).
- Use the top bubble level on the sensor to ensure it is perfectly level. This is critical for accurate rainfall readings.
6.2. Temperature | Humidity Wireless Remote Sensor Mounting (Optional)
If you have an additional temperature/humidity sensor, follow these guidelines:
- Option 1 (Wall Mount): Mount the mounting screws to the wall, then hang the wireless sensor on the screw.
- Option 2 (Direct Mount): Insert the mounting screws through the front of the wireless sensor into the wall and tighten them snugly (do not overtighten).
- If placing outdoors, install the sensor on a north-facing wall or in any shaded area. Direct sunlight can cause higher temperature readings. A guardrail under the eaves or under a deck is often preferred.
- Ensure the wireless sensor is installed vertically to allow moisture to vent properly.
6.3. Rainforest Structure Cleaning
The rainforest structure of the outdoor sensor needs regular cleaning, recommended every 1-3 months, depending on rainfall frequency.
- Remove the rainwater funnel by turning it according to the rotation direction shown in the manual.
- Gently remove any debris or insects from the rain sensor.
- Remove debris from the rainwater funnel itself, especially from the funnel drain.
- Reinstall the rainwater bucket.
- Important: Do not apply oil to the rain sensor.
Ensure the wireless sensor is installed within 100 meters of the weather station (in an empty, unobstructed area). Obstacles between the wireless sensor and the weather station will shorten the effective transmission distance and may disturb data transmission.
7. Troubleshooting
- No Display on Console: Ensure the power adapter is securely plugged in and backup AA batteries are installed correctly.
- Outdoor Sensor Not Connecting: Check if the outdoor sensor batteries are correctly installed and have sufficient charge. Ensure the sensor is within the 100-meter transmission range and there are no major obstructions. Try re-pairing the sensor by holding the “CH” button on the console for 3 seconds.
- Inaccurate Readings:
- Rainfall: Ensure the outdoor sensor is level using the bubble level. Clean the rain funnel regularly to prevent blockages.
- Wind Direction: Verify the solar panel on the outdoor sensor is facing south as per mounting instructions.
- Temperature/Humidity: Ensure optional remote sensors are not in direct sunlight if placed outdoors.
- Wi-Fi Connection Issues: Confirm your Wi-Fi network is 2.4GHz. Ensure the weather station is within range of your Wi-Fi router. Try re-pairing via the Tuya Smart App.
- App Data Not Updating: Check your internet connection and ensure the weather station is successfully connected to Wi-Fi. Restart the app.
- Low Battery Indicator: If the “⚠” icon appears, replace the batteries in the indicated sensor or console promptly.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | GOYOJO |
| Model Number | MK3395TY-2 |
| Theory | Multifunctional Thermometer |
| Power Type (Console) | DC 5V >1A (Power Adapter) / 2 x AA 1.5V Batteries (backup, not included) |
| Power Type (Multi-combination Sensor) | 3 x AA 1.5V Batteries (not included), Solar-assisted |
| Power Type (Temp/Humidity Remote Sensor) | 2 x AAA 1.5V Batteries (not included) |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
| Max Measuring Temperature (Outdoor) | -40°C (-40°F) to 70°C (158°F) |
| Max Measuring Temperature (Indoor) | -20°C (-4°F) to 50°C (122°F) |
| Style | Standing and Wall Hanging |
| Is Smart Device | Yes (Tuya Smart System) |
| Use | Household |
| Display Size | 7'' Large Colored Display (4.0 - 6.9 Inches) |
| Display Type | DIGITAL |
| RF Transmitting Frequency | 433.92MHz |
| Transmission Range | 100 meters (328 feet) in open area |
| Operating Temperature (Main Unit) | 0°C to +50°C |
| Operating Temperature (Wireless Remote Sensor) | -30°C to +70°C |
| High-concerned chemical | None |
9. User Tips
- For the most accurate wind and rain data, ensure your outdoor sensor is mounted in an open, unobstructed location and is perfectly level.
- Regularly check and clean the rain funnel to prevent debris from affecting rainfall measurements.
- When setting up Wi-Fi, confirm your router is broadcasting a 2.4GHz signal, as the device does not support 5GHz networks.
- Utilize the Tuya Smart App to its full potential for historical data tracking and remote monitoring of your weather conditions.
10. Warranty and Support
This GOYOJO Professional Wi-Fi Weather Station is manufactured by GOYOJO Industrial Technology (Shenzhen) Co., Ltd.
Manufacturer Address: Shenlan Bldg, No.1 Lianteng Rd, Guangming, Shenzhen, 518107 China
Contact Us:
- Email: tools@goyojo.com
- WhatsApp/Phone: +1 (571)353-8614
Certifications: The product complies with CE, FCC, and RoHS standards.
Warning: Handle with care, as this product contains fragile glass components.
The product is Made in China.