XIAOMI MJBXCQBQW

Contents

XIAOMI MIJIA Portable Electric Air Compressor User Manual

Model: MJBXCQBQW | Brand: XIAOMI

1. Safety Warnings

WARNING!

  • This product is not a toy. Do not allow children to use it.
  • Read this instruction manual carefully before using the product and keep it for future reference.
  • Strictly follow all safety warnings and operating instructions to ensure safe use.
  • The product generates noise exceeding 80 dB(A) during operation. Please use hearing protection.
  • Prolonged continuous operation may cause the device body and high-pressure hose to heat up. It is recommended to pause use and allow it to cool down before continuing.
  • Always ensure the work area is clean and well-lit. Cluttered and dark areas can lead to accidents.
  • Do not operate the electric tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The sparks generated by the electric tool may ignite dust or fumes.
  • Keep children and bystanders away while operating the electric tool. Distractions can cause you to lose control.
  • Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hats, and hearing protection, when used under appropriate conditions, can reduce personal injuries.
  • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
  • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
  • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
  • Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
  • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
  • Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

2. Product Overview

The XIAOMI MIJIA Portable Electric Air Compressor is designed to inflate a variety of items, including most bicycles, motorcycles, electric scooters, and various types of balls. Its compact and portable design makes it an ideal companion for on-the-go inflation needs.

2.1. Key Features

  • Portable & Compact: Easy to store and carry, weighing only approximately 240g.
  • High-Precision Tire Pressure Detection: Automatically stops inflation once the preset pressure is reached, preventing over-inflation.
  • 150 PSI High-Pressure Output: Delivers powerful inflation for diverse applications.
  • 2000mAh Large-Capacity Battery: Provides long-lasting power for multiple inflations on a single charge.
  • High-Performance Brushless Motor: Ensures powerful, stable, and reliable operation, even under high-pressure air supply.
  • Multiple Preset Modes: Offers one-touch operation for quick inflation across various scenarios.
  • Built-in LED Light: Features a steady white light mode for night use and an SOS flashing mode for emergencies.
  • Slim-Bezel Display: Features a premium IML craftsmanship for a scratch-resistant, durable, and smooth-to-the-touch experience with a minimalist aesthetic.

2.2. Product Components

The diagram below illustrates the main components of your air compressor and its accessories.

Diagram showing the Mijia Portable Air Pump and its accessories: French valve adapter, air needle, storage bag, and instruction manual.

Figure 2.2.1: Mijia Portable Air Pump and Package Contents

  • Lighting: Integrated LED light for illumination.
  • Display Screen: Shows current pressure, battery level, and mode.
  • '+' Button: Increases preset pressure.
  • Light Control Button: Toggles LED light and SOS mode.
  • Start/Stop Button: Powers the device on/off and starts/stops inflation.
  • '-' Button: Decreases preset pressure.
  • High-Pressure Hose: Connects the pump to the valve. (Note: This hose is not detachable from the main unit).
  • French Valve Adapter: For French (Presta) valves.
  • Air Needle: For inflating balls.
  • Mode Button: Cycles through inflation modes.
  • American Valve Interface: Standard connection point for the hose.
  • Charging Port (USB-C): Located at the bottom of the unit.
  • Storage Bag: Includes an inner pocket for the French valve adapter and air needle.

Video 2.2.2: Product demonstration showing various inflation scenarios and features.

3. Setup

3.1. Initial Charging

Before first use, fully charge the air compressor. Use a safe and compliant charger and a USB-C charging cable (not included) to charge the device.

3.2. Charging Status Indicators

  • Flashing (1 bar): Battery level ≤ 30%
  • Flashing (2 bars): Battery level > 30% and ≤ 70%
  • Flashing (3 bars): Battery level > 70% and ≤ 99%
  • Solid for 20 seconds then off: Battery level 100% (fully charged)

4. Operating Instructions

4.1. Power On/Off

  • To turn on or off, press and hold the Start/Stop button for 1.5 seconds.
  • The air compressor will automatically shut down after 3 minutes of inactivity.

4.2. Usage Status Battery Indicators

  • Solid (3 bars): Battery level > 70% and ≤ 100%
  • Solid (2 bars): Battery level > 30% and ≤ 70%
  • Solid (1 bar): Battery level ≤ 30%

4.3. Switching Modes

When the device is powered on, short press the Mode button to cycle through the following inflation modes:

  1. Motorcycle/E-bike Mode
  2. Bicycle Mode
  3. Electric Scooter Mode
  4. Ball Mode
  5. Custom Mode
Image showing the different preset modes: Motorcycle/E-bike, Bicycle, Electric Scooter, Ball, and Custom mode with their default PSI values.

Figure 4.3.1: Multiple Preset Inflation Modes

4.4. Switching Units (bar/psi)

After selecting a mode, press and hold the Mode button for 1.5 seconds to switch the pressure unit between bar and psi for that specific mode.

4.5. Preset Inflation Pressure

After selecting a mode, short press the '+' or '-' buttons to adjust the preset inflation pressure for that mode. Long press the '+' or '-' buttons for rapid adjustment.

Image showing the air pump displaying '35 PSI' and text about preset common pressure values being automatically saved.

Figure 4.5.1: Preset Memory Function

This table provides general recommended inflation pressures. Always refer to the official requirements of the product being inflated. Inflation pressure can be affected by load and ambient temperature.

Product CategorySpecific TypeRecommended Pressure Range
Bicycle12, 14, 16 inch tires30-50 psi
20, 22, 24 inch tires40-50 psi
26, 27.5, 29 inch MTB tires45-65 psi
Xiaomi E-scooter tires45-60 psi
700c Road bike clincher80-120 psi
700c Road bike tubular80-120 psi
Motorcycle/E-bikeMotorcycle, E-motorcycle, E-bike tires1.8-3 bar
BallsBasketball7-9 psi
Football8-16 psi
Volleyball4-5 psi
Rugby12-14 psi

WARNING: Avoid over-inflation, as this may cause product damage or personal injury.

4.7. Pressure Detection

After powering on the air compressor, select and install the appropriate nozzle. Connect the air compressor's nozzle to the valve of the item to be detected. The display screen will show the current air pressure of the item.

Image showing the air pump connected to a bicycle tire, displaying the pressure '45 PSI'.

Figure 4.7.1: High-Precision Tire Pressure Monitoring

4.8. Connecting Nozzles

The air compressor comes with multiple nozzle attachments to fit various valve types.

Diagram showing the air pump's American valve interface, a Presta valve adapter, and an air needle.

Figure 4.8.1: Multiple Nozzle Attachments

  • American Valve Interface: Compatible with mountain bikes, e-bikes, e-scooters, motorcycles, and cars. Connect the air compressor's American valve interface directly to the item's valve.
  • French Valve Adapter: For road bikes and some mountain bikes. Open the valve switch on the item, install the French valve adapter onto the air compressor's American valve interface, then connect the air compressor's French valve adapter to the item's valve.
  • Air Needle: For basketballs, soccer balls, footballs, volleyballs, etc. Install the air needle onto the air compressor's American valve interface, then connect the air needle to the item's valve.
Image illustrating how to connect the air pump to American, Presta, and Ball valves.

Figure 4.8.2: Valve Type Compatibility

4.9. Inflation Process

  1. Connect the appropriate nozzle to the item's valve.
  2. Power on the air compressor.
  3. Short press the Start/Stop button to begin inflation. The display will show the real-time air pressure.
  4. The air compressor will automatically stop when the preset pressure is reached. You can also short press the Start/Stop button at any time to manually stop inflation.

Note: When inflating low-pressure items like balloons, toy balls, or swimming rings, always confirm the appropriate inflation pressure and manually stop inflation in time to prevent damage or injury.

Caution: After inflation, the nozzle and high-pressure hose may be hot. It is recommended to allow them to cool down before detaching to avoid burns. When detaching the nozzle, a slight air leak may occur; quickly detach to minimize air loss.

4.10. LED Light Operation

  • When the device is powered on, short press the Light Control button to turn the LED light on or off.
  • To activate SOS mode, press and hold the Light Control button. The LED light will flash in an SOS pattern. Short press the Light Control button to turn off SOS mode.
Image showing the air pump being used to illuminate a motorcycle tire at night, with icons for Lighting Mode and Warning Mode (SOS flashing).

Figure 4.10.1: LED Light for Night Use and Emergency

5. Specifications

Diagram showing the dimensions of the Mijia Portable Air Pump: 60mm width and 93mm height.

Figure 5.1.1: Product Dimensions

ParameterValue
Product NameMijia Portable Air Pump
Product ModelMJBXCQBQW
Product DimensionsApprox. 60 × 38 × 93mm (main unit, excluding high-pressure hose)
Product Net WeightApprox. 240g (including high-pressure hose)
Inflation Pressure0.2-10.3 bar / 3-150 psi
Operating Temperature-10°C ~ 45°C
Charging Temperature5°C ~ 40°C
Storage Temperature-10°C ~ 45°C
High-Pressure Hose Length85.5mm
American Valve Interface Inner DiameterΦ6.9mm
French Valve Adapter Inner DiameterΦ6mm
Battery TypeLithium-ion battery
Battery Capacity2000mAh (7.2Wh)
Working Noise80 dB(A) (at 1 meter)
Rated Input5V=2A
Charging PortUSB-C
Charging TimeApprox. 1.5 hours
Sensor Accuracy±1 psi
StandardQ/310107QW007-2025

USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

5.2. Hazardous Substances Information

The product complies with national standards regarding hazardous substances in electrical and electronic products. All components are marked 'O' (indicating hazardous substance content is below the standard limit) except for the PCB, which is marked 'X' (indicating hazardous substance content exceeds the standard limit for certain materials).

6. Maintenance

6.1. General Maintenance

  • Keep the tool clean and dry.
  • If the charging terminals become dirty, wipe them with a clean, dry cloth.
  • Store the product in a dry and clean environment. Dust and dirt ingress may cause product damage. The product is not waterproof; do not rinse with water.
  • Keep handles and gripping surfaces dry, clean, and free from oil and grease. Slippery handles prevent safe handling and control of the tool in unexpected situations.

6.2. Battery Care

  • The product contains a non-removable lithium battery. Do not dispose of the product in fire or discard it randomly.
  • Avoid exposing the battery to high temperatures, such as inside a car under direct sunlight, as this may lead to fire, spontaneous combustion, or explosion.
  • Store the product at temperatures between -10°C and 45°C. Extreme cold or heat can shorten battery life and damage the internal battery.
  • If the product is left idle for a long time, the battery may be damaged. It is recommended to charge it at least once every three months.
  • Do not charge the tool for extended periods when not in use.
  • After long-term storage, the tool may require several charge-discharge cycles to achieve optimal performance.
  • The performance of the battery is best at room temperature (20°C ± 5°C).
  • Do not use non-device specific batteries.

6.3. Service and Repair

  • Only use identical replacement parts for repairs. This will ensure the safety of the electric tool is maintained.
  • Do not repair damaged battery packs. Battery packs should only be serviced by the manufacturer or authorized service providers.
  • If the air compressor malfunctions, first try turning it off by long-pressing the Start/Stop button, then restart it by long-pressing the Start/Stop button again. If it cannot be restored to normal, please contact Xiaomi customer service.
  • Any malfunction caused by charging not in accordance with the instructions is not covered by the warranty.

7. Troubleshooting

If you encounter any issues with your air compressor, please refer to the table below for possible causes and solutions.

IssuePossible Cause & Solution
The Air Compressor Does Not Turn OnThe air hose is not removed from its compartment. The air compressor can be turned on only when the air hose is removed from its compartment.
The battery may be depleted; fully charge the air compressor and then turn it on.
The inflation speed is slow
  • Check whether the battery power is sufficient.
  • Check whether the high-pressure hose is damaged or leaking.
  • Check whether both ends of the air hose are securely connected.
  • Check whether the inflated item is leaking.
The air compressor turns on but does not inflate
  • Check whether the battery power is sufficient.
  • Check whether the current air pressure is higher than the preset value.
  • Check if the French valve switch is open.
The preset pressure cannot be increased or decreasedThe pressure range varies between different modes. You can select custom mode and adjust the preset value within the 3-150 psi range as needed.
The air compressor inflates normally but the displayed pressure is zeroLow-pressure inflatables such as balloons are not within the measurable range of this product. Please stop inflation manually.
The air compressor has already turned off after connecting the air hose to a valveThis product has an automatic shutdown function. Simply restart the device.
Air leaks out when connecting the air hoseEnsure the nozzle is correctly connected and tightened to the valve.
The battery level indicator on the display does not light up while chargingUse a safe and compliant charger and charging cable for this product. The battery indicator will turn off after being continuously lit for 20 seconds once fully charged.

8. User Tips

  • Operating Noise: Be aware that the air compressor can be louder than expected during operation.
  • Versatile Use: This pump works effectively on both e-scooter and bicycle tires.
  • Portability: Leverage its compact size and light weight (approx. 240g) for easy transport and use on the go.

9. Warranty and Support

9.1. Warranty Policy (Mainland China)

The MIJIA Portable Air Compressor's after-sales service strictly adheres to the 'Consumer Rights Protection Law of the People's Republic of China' and the 'Product Quality Law of the People's Republic of China', offering a 'Three Guarantees' service as follows:

  • Within 7 days of receipt: If a performance fault listed in the 'MIJIA Portable Air Compressor Performance Fault Table' occurs, confirmed by Xiaomi after-sales service, you are eligible for free return or exchange.
  • Within 8-15 days of receipt: If a performance fault listed in the 'MIJIA Portable Air Compressor Performance Fault Table' occurs, confirmed by Xiaomi after-sales service, you are eligible for free exchange or repair.
  • Within 12 months of receipt: If a performance fault listed in the 'MIJIA Portable Air Compressor Performance Fault Table' occurs, confirmed by Xiaomi after-sales service, you are eligible for free repair.

Note: This product is sold and serviced only in mainland China (excluding Hong Kong, Macau, and Taiwan regions). This warranty policy is only applicable within mainland China. Due to structural design, the repair method for this product is typically replacement.

9.2. Non-Warranty Conditions

The following conditions are not covered by the warranty:

  • Unauthorized repair, misuse, collision, negligence, abuse, liquid ingress, accident, alteration, or improper use of non-product accessories.
  • Torn or altered labels, or anti-counterfeit marks.
  • Exceeding the 'Three Guarantees' validity period.
  • Damage caused by force majeure.
  • Performance faults not listed in the 'MIJIA Portable Air Compressor Performance Fault Table'.
  • Product and its accessories faults caused by human factors.

9.3. Customer Support

For after-sales service needs, please contact Xiaomi customer service:

Manufacturer: Shanghai Qi Wai Culture Technology Co., Ltd.

Manufacturer Address: 45th Building, No. 50 Moganshan Road, Putuo District, Shanghai

You can also scan the QR code below for videos and more convenient services.

QR code for additional service information

© 2024 XIAOMI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.