1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your ANYFAR Wireless CarPlay and Android Auto module. This module is designed to upgrade your Mercedes-Benz NTG 4.5/4.7 system, integrating modern smartphone connectivity while retaining your original car screen functionality.
The system supports both wireless and wired connections for Apple CarPlay and Android Auto, offering features such as voice control, navigation, music playback, and hands-free communication.
2. Compatibility
This module is specifically designed for Mercedes-Benz vehicles equipped with the NTG 4.5 or NTG 4.7 system. It is NOT compatible with NTG 4.0, NTG 5.0, or NTG 5.1 systems. Please verify your car's NTG version before installation.
2.1 Compatible Model List (NTG 4.5/4.7 System, 5.8 inch/7 inch screen)
| Car Model | Years |
|---|---|
| A Class W176 | 2013-2015 |
| B Class W242/W246 | 2012-2015 |
| C Class W204 | 2011-2014 |
| CLA Class C117/W117 | 2013-2015 |
| CLS Class W218 | 2012-2015 |
| E Class sedan W212 | 2012-2015 |
| E Class coupe C207 A207 | 2012-2015 |
| G Class W463 | 2012-2015 |
| GLA Class X156 | 2013-2015 |
| GLK Class | 2013-2015 |
| ML/GL | 2012-2015 |
| SLK R172 | 2011-2015 |
3. Product Features
The ANYFAR module offers a range of features to enhance your driving experience:
- Wireless & Wired CarPlay: Seamless integration with your iPhone for navigation, music, calls, and messages via Apple CarPlay. Supports Siri voice control.
- Wireless & Wired Android Auto: Connect your Android smartphone for Google Maps, Spotify, calls, and more, utilizing Google's voice control system.
- Retains OEM Functionality: Easily switch between the original car system and the CarPlay/Android Auto interface by long-pressing the "Back" button on the car knob.
- Front/Rear/360 Camera Input: Supports video decoding for aftermarket front view, rear view cameras (with intelligent dynamic trajectory display and radar support), and 360-degree panoramic view systems.
- Bluetooth Connectivity: For initial pairing and audio streaming.
- Voice Control: Utilize your phone's voice assistant (Siri or Google Assistant) for hands-free operation.
- Live Map Support: Access real-time navigation from your smartphone.
- Online Entertainment: Stream music and other media directly through the system.
- Lossless Installation: Designed for integration without permanent modifications to your vehicle's existing wiring.
4. Setup and Installation
4.1 Wiring Diagram
The following diagram illustrates the general wiring connections for the ANYFAR module. Professional installation is recommended.
Connect the ANYFAR module to the factory LVDS harness and the car's head unit as shown. Ensure all connections are secure.
4.2 DIP Switch Settings
Adjust the DIP switches on the module according to your specific car model and screen size. Ensure the dial is set to "ON" for the selected configuration. After changing DIP settings, reboot the decoder box for changes to take effect.
| Car Model | Years | Screen Size | DIP Setting |
|---|---|---|---|
| A/B/C/E/CLA/CLS/GLA/GLK/SLK | 2011-2015 | 5.8 inch | 67/678 ON |
| G500 | 2012-2015 | 5.8 inch | 58 ON |
| E/M/C63 | 2012-2015 | 7 inch | 7/15 ON |
Note: The provided table content is for Mercedes-Benz models, despite an introductory text mentioning "Alfa Romeo car model". Please follow the Mercedes-Benz specific settings.
5. Operation
5.1 Wireless Connection (CarPlay & Android Auto)
The module utilizes Bluetooth for initial pairing and then Wi-Fi for data transmission. Ensure your vehicle's audio system is set to Bluetooth music mode for optimal performance.
- Turn on your phone's Bluetooth and Wi-Fi.
- On your phone, search for Bluetooth devices and select "CAR Audio XXXX" (where XXXX is a unique identifier).
- Pair your phone with the module. A request window may pop up to "Use CarPlay" or confirm pairing.
- For Android Auto, follow the on-screen prompts after successful Bluetooth pairing to complete the connection.
Audio Source Check: On your iPhone, ensure the sound source is set to the original car radio (e.g., "MB bluetooth") for audio output through the car's speakers.
5.2 Button Control
The module integrates with your car's existing controls for a seamless user experience.
Steering Wheel Button Control
| Button | Operation | Function |
|---|---|---|
| Phone (Call icon) | Long press | Switch between OEM screen and interface screen |
| Phone (Call icon) | Short press | Hang up the phone |
| Call (Receiver icon) | Short press | Answer the phone |
| Volume + | Short press | Increase volume |
| Volume - | Short press | Decrease volume |
Console Knob Button Control
| Button | Operation | Function |
|---|---|---|
| Back (Arrow icon) | Long press | Switch between OEM screen and interface screen |
| Knob | Swipe/Click | Control function (navigation, selection) |
| Hazard (Triangle icon) | Double Click | Switch between OEM screen and interface screen |
6. External Settings
6.1 Rear View Camera Input
The CarPlay interface supports aftermarket rear view cameras. Connect the camera as per the wiring diagram below.
To enable the rear view function:
- Access the system settings: Go to "Factory mode" > "Advanced mode".
- Enter the password "888888".
- Navigate to "MCUsetup" and uncheck the "AO" option.
- Return to the previous level and click "Restart system" to apply changes.
6.2 Radar and Trajectory
If your aftermarket camera supports reversing trajectory lines or radar, you can enable these features:
- To display the reversing trajectory line, uncheck the "A1" box in the system settings.
- For aftermarket radar functionality, uncheck the "A2" box in the system settings.
The front camera input settings are configured similarly.
6.3 AUX Output
If your car does not have Bluetooth functionality, you can use the AUX output for audio.
- Connect the AUX cable from the module to your car's AUX input.
- Select AUX as the audio source in your car's NTG system.
- In the module's settings, navigate to: "Settings" > "Factory Settings" > "Phone link Settings".
- Set "Disable phonelink Audio" to "ON".
- Go back and save the settings.
- Reboot the module for the changes to take effect.
7. Troubleshooting
7.1 Why does the Box's Bluetooth disconnect?
This is a normal phenomenon. For wireless CarPlay/Android Auto, Bluetooth is used for initial pairing. Once the device information is confirmed, a Wi-Fi connection is established to transmit data. To avoid interference, the Bluetooth connection will then disconnect.
7.2 Cannot connect CarPlay, but Bluetooth is already paired.
If you are experiencing issues connecting CarPlay despite successful Bluetooth pairing, try the following steps on your iPhone:
- Forget the device's Bluetooth connection.
- Reset Wi-Fi settings: Go to "Settings" > "General" > "Transfer or Reset [Device]" > "Reset" > "Reset Network Settings".
7.3 Why is the wireless CarPlay/Android Auto connection unstable?
An unstable wireless connection can be caused by several factors:
- Module Placement: Ensure the ANYFAR module is not blocked by metal components in your car, as this can impair Wi-Fi signal transmission.
- Wi-Fi Channel Interference: Switch the Wi-Fi channel within the CarPlay box settings. Go to: "Factory Mode" > "Connectivity Settings" > "Hotspot Band" > Select channel 1, 6, or 11, depending on your region and local interference.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | ANYFAR |
| Compatible Systems | Mercedes-Benz NTG 4.5 / NTG 4.7 |
| Compatible Screen Sizes | 5.8 inch / 7 inch |
| Connectivity | Wireless/Wired CarPlay, Wireless/Wired Android Auto, Bluetooth, Wi-Fi |
| Inputs | Front Camera, Rear Camera, 360 Camera, AUX |
| Origin | Mainland China |
| Package Length | 26 cm |
| Package Width | 17 cm |
| Package Height | 11 cm |
| Package Weight | 0.878 kg |
9. User Tips
No specific user tips were available from the provided content.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official ANYFAR website or contact your retailer. A user manual in PDF format may be available for download: View User Manual (PDF).