diymore SK60X/SK120X

Contents

SK60X/SK120X CNC Lift-off DC Adjustable Voltage Regulator User Manual

Model: SK60X/SK120X | Brand: diymore

1. Introduction

The diymore SK60X/SK120X is a versatile CNC Lift-off DC Adjustable Voltage Regulator, designed for applications requiring constant voltage (CV), constant current (CC), and constant power (CW) output. This module supports MPPT solar charging and features a clear, all-viewing-angle VA color LCD display for easy monitoring and control. It is equipped with silicone buttons for comfortable operation and housed in a flame-retardant shell for enhanced safety.

2. Product Features

  • Silicone buttons with cool indicator lights for comfortable operation.
  • Professional power supply LCD screen with a large, rounded font for clear display.
  • Immersed gold design display board for anti-oxidation, better conductivity, and durability.
  • One-piece injection molding, flame-retardant shell for safety.
  • Double-layer buckle design and double-layer circuit board for firm fixation.
  • Supports standard Modbus protocol for serial communication.
  • Supports firmware upgrades.
  • Supports MPPT solar charging.
  • High-precision external clock crystal for accurate time, capacity, and energy statistics.
  • 48-pin powerful MCU controller with 64M frequency for faster computing speed.
  • Wide range of applications, including charging various rechargeable batteries with anti-backflow function.
  • External temperature probe support for over-temperature protection.

3. Specifications

3.1. SK60X Model

ParameterValue
Input Voltage6.0~36V
Output Current0~5.000A
Output Power60W
Voltage Resolution0.01V
Conversion Efficiency~88%
Output Voltage0~36V
Voltage Accuracy±0.5%+1 word
Current Accuracy±0.5%+3 words
Current Resolution0.01A
Storage Data Groups10 groups
MPPT FunctionSupported
BuzzerYes
Soft StartYes

3.2. SK120X Model

ParameterValue
Input Voltage6.0~36V
Output Current0~6.000A
Output Power120W
Voltage Resolution0.01V
Conversion Efficiency~88%
Output Voltage0~36V
Voltage Accuracy±0.5%+1 word
Current Accuracy±0.5%+3 words
Current Resolution0.001A
Storage Data Groups10 groups
MPPT FunctionSupported
BuzzerYes
Soft StartYes

3.3. Physical Dimensions

Product and package dimensions for SK60X and SK120X
Figure 1: Product and Package Dimensions. SK60X product weight: 288g, total weight: 330g. SK120X product weight: 302g, total weight: 344g. Product size: 111mm (width) x 57mm (height) x 65mm (depth). Package size: 135mm x 107mm x 75mm.

4. Product Overview

4.1. Front Panel

Front view of the SK60X/SK120X module showing LCD, buttons, and rotary encoder
Figure 2: Front Panel Layout. Features a VA color LCD display (over 1.8 inches), V-SET, SW, I-SET buttons, a rotary encoder, and an ON/OFF button.

4.2. Rear Panel and Interfaces

Rear view of the SK60X/SK120X module showing input ports, exhaust fan, and terminal block
Figure 3: Rear Panel Interfaces. Includes a power battery interface, DC5.5*2.5 plug input, PD interface (automatically activated for 20V output with PD charging head), a spare expansion port, an intelligent temperature-controlled exhaust fan, and a pluggable terminal block for input/output connections.

Important: It is prohibited to connect two or more input interfaces simultaneously.

Diagram showing air inlet and exhaust fan for heat dissipation
Figure 4: Heat Dissipation Structure. The unit features an invisible air inlet on the front and a reasonable air outlet with an exhaust fan on the rear for efficient heat removal.

5. Setup and Installation

5.1. Power Input Connection

  1. Ensure the input voltage is within the specified range of 6.0V to 36V.
  2. Connect your power source to one of the available input interfaces: the power battery interface, DC5.5*2.5 plug, or the PD interface.
  3. CAUTION: Do NOT connect multiple input interfaces at the same time. This can damage the device.
  4. If using a PD charging head, the PD interface will automatically activate and output 20V.

5.2. Output Connection

  1. Connect your load to the pluggable terminal block labeled OUT+ and OUT-.
  2. Ensure correct polarity when connecting the load.

6. Operation

6.1. Basic Controls

  • V-SET Button: Used to set the output voltage.
  • I-SET Button: Used to set the output current limit.
  • SW Button: Likely used for switching display modes or functions.
  • Rotary Encoder: Used to adjust values (voltage, current) when in setting mode. Pressing the encoder might confirm selections.
  • ON/OFF Button: Toggles the power output to the load. Note that this button only controls the output, not the device's main power.

6.2. Setting Voltage and Current

  1. Press the V-SET button to enter voltage setting mode. The voltage value on the LCD will likely blink or be highlighted.
  2. Rotate the encoder to adjust the desired output voltage.
  3. Press the encoder to confirm the voltage setting or press V-SET again to exit.
  4. Repeat similar steps using the I-SET button and rotary encoder to set the output current limit.

6.3. MPPT Solar Charging

The device supports Maximum Power Point Tracking (MPPT) for solar charging applications. This function helps extract the maximum possible power from a solar panel. Refer to the device's menu for specific MPPT settings, such as adjusting the MPPT percentage.

6.4. Data Storage

The unit can store up to 10 groups of data, allowing users to save and recall frequently used voltage and current settings.

7. Protection Mechanisms

The device incorporates several protection features to ensure safe operation:

  • Input Anti-Reverse Connection: Yes
  • Output Anti-Reverse: Yes
  • Input Undervoltage Protection: Adjustable from 5.5-36V (default 5.5V output).
  • Over-Voltage Protection: Adjustable from 0-38V (default 38V).
  • Output Overcurrent Protection:
    • SK60X: 0-5.2A adjustable (default 5.2A).
    • SK120X: 0-6.2A adjustable (default 6.2A).
  • Output Over Power Protection:
    • SK60X: 0-80W adjustable (default 65W).
    • SK120X: 0-150W adjustable (default 125W).
  • Over-Temperature Protection: Adjustable from 0-110°C (default 95°C). Can be connected to an external temperature probe.
  • Timeout Protection: 0-100H adjustable (default off).
  • Over Capacity Protection: 0~9999AH adjustable (default off).
  • Super Energy Protection: 0~4200KWH adjustable (default off).

8. Maintenance

8.1. Cooling System

The device is equipped with an intelligent temperature-controlled exhaust fan and strategically placed air inlets to ensure efficient heat dissipation. Keep the air inlets and outlets clear of obstructions to maintain optimal performance and prevent overheating.

8.2. General Care

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to moisture or extreme temperatures.
  • Do not attempt to open the casing or modify the internal components, as this may void any potential warranty and pose a safety risk.

9. Troubleshooting

9.1. Common Issues

  • Output Voltage Crashes to 0V (especially with low power solar panels): If the output voltage frequently drops to 0V, try the following sequence: turn the converter output OFF (using the ON/OFF button), set the output voltage to 1V, turn the converter output ON, and then gradually raise the output voltage to your desired level.
  • Device Not Powering On: Ensure the input power source is connected correctly and provides voltage within the 6.0-36V range. Check all connections for secure contact.
  • Protection Mechanism Triggered: If the device unexpectedly shuts off or limits output, check the display for any error messages related to over-voltage, over-current, over-power, or over-temperature protection. Adjust your settings or load accordingly.

9.2. User Tips

  • MPPT Settings: For solar charging, it is suggested to set the MPPT percentage to 0.75 in the device settings (this may be off by default).
  • Accuracy: The output is generally very accurate, often within 0.001 volts at low power, with slight variations at higher power draws.
  • Power Button Functionality: Remember that the ON/OFF button only controls the power output to the load; it does not completely shut down the device. A separate external on/off switch for the input power is recommended for full shutdown.
  • Lead-Acid Battery Charging: This device can be used for charging lead-acid batteries due to its constant voltage and constant current capabilities.

10. Warranty and Support

For any technical assistance or inquiries regarding your SK60X/SK120X module, please refer to the official product page or contact the seller directly. Keep your purchase records for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.