DIY E27/E14 Hanging Lamp Holder

Contents

DIY E27/E14 Hanging Lamp Holder Instruction Manual

Model: E27/E14 Hanging Lamp Holder

1. Introduction

This manual provides instructions for the safe and proper use of your DIY E27/E14 Hanging Lamp Holder. This product is designed for creating custom lighting solutions with E27 or E14 bulbs, featuring a 1-meter power cord with an integrated switch and various plug types.

2. Safety Information

Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Ensure the power supply is disconnected before installation or replacing the bulb.
  • Do not exceed the maximum wattage specified for the lamp holder.
  • Keep away from water and moisture.
  • Do not modify the product in any way not described in this manual.
  • If you are unsure about electrical installations, consult a qualified electrician.

3. Package Contents

Verify that all components are present before beginning installation:

  • 1 x E27/E14 Lamp Holder with 1m Power Cord, Switch, and EU/US/AU/UK Plug (Type A, B, or C depending on selection)
  • (Bulb not included)

The product may come in different configurations:

Three different types of E27 lamp holders with 1m power cords, switches, and EU plugs.
Overview of different lamp holder types (Type A, B, C) with power cords.
Two E27 lamp holders with 1m power cords, switches, and EU plugs, showing slight variations in design.
Two common lamp holder designs.

4. Setup and Installation

This lamp holder is designed for safe and convenient lighting installation, allowing you to freely design your room.

  1. Prepare the Lamp Holder:
    Diagram showing components of an E27 lamp holder: snap-lampshade, lamp holder snap cap, E27 screw, and card type full teeth.
    Exploded view of the E27 Lamp Holder components.
    • If your lamp holder includes a "Lamp cover snap ring" or "Snap-lampshade" (as shown in diagrams), you may need to disassemble the lamp holder slightly to fit a lampshade.
    • The "Lamp Holder Snap Cap" can be twisted to secure the lamp holder wires.
    • The "E27 Screw" component is designed for easy installation with a compression spring metal sheet.
  2. Insert the Bulb: Carefully screw an E27 or E14 bulb (depending on your model) into the lamp holder socket until it is snug. Do not overtighten.
  3. Choose the Correct Plug: The product is available with EU, US, AU, or UK standard plugs. Ensure you have the correct plug type for your region.
    Image showing four different plug types: US Plug, EU Plug, UK Plug, and AU Plug.
    Available plug types for the lamp holder.
  4. Connect to Power: Plug the power cord into a suitable wall outlet.
  5. Positioning: Hang the lamp holder in your desired location. The 1-meter wire length provides flexibility for placement.

5. Operating Instructions

The lamp holder features an inline button switch for easy control.

Close-up image of the 303 button switch on the power cord, showing its on/off functionality.
The 303 Button Switch for convenient on/off control.
  1. To turn the light ON, press the button switch.
  2. To turn the light OFF, press the button switch again.

6. Maintenance

  • Cleaning: Disconnect from power before cleaning. Wipe the lamp holder and cord with a dry, soft cloth. Do not use abrasive cleaners or liquids.
  • Bulb Replacement: Ensure the power is off and the bulb has cooled before attempting to replace it. Unscrew the old bulb and screw in a new one of the correct type (E27 or E14) and wattage.
  • Inspection: Periodically check the cord and plug for any signs of damage. If damage is found, discontinue use and replace the product.

7. Troubleshooting

  • Light does not turn on:
    • Ensure the power cord is securely plugged into a working outlet.
    • Check if the bulb is screwed in correctly and is not faulty.
    • Verify the switch is in the "ON" position.
    • Test the outlet with another device to confirm it has power.
  • Flickering light:
    • Ensure the bulb is screwed in tightly.
    • Try a different bulb to rule out a faulty bulb.

8. Specifications

Feature Detail
Item Type Lamp Bases
Base Material Metal
Origin Mainland China
Socket Type E27 / E14 (depending on model)
Wire Length 1 meter (1.8 meters mentioned in some descriptions, please verify your specific product)
Material PVC + Plastic (Woven Outer Quilt for cord)
Switch Type 303 Button Switch
Plug Type EU, US, AU, UK (depending on selection)
Approx. Product Dimensions (Packaged) Length: 22 cm, Width: 22 cm, Height: 10 cm
Approx. Product Weight (Packaged) 0.2 kg

Dimensional Details for Specific Types:

  • Type A (Aluminum Lamp Cup):
    • Overall Height: 68mm
    • Ring Diameter: 48.5mm
    Diagram of Type A lamp holder with dimensions: 1m wire, button switch, EU plug, aluminum lamp cup, 68mm height, 48.5mm ring diameter, E27 lamp holder.
    Type A Lamp Holder with dimensions.
  • Type B (Iron Lamp Cup):
    • Overall Height: 60mm
    • Diameter: 38.5mm
    Diagram of Type B lamp holder with dimensions: 1m wire, woven outer quilt, button switch, EU plug, iron lamp cup, 60mm height, 38.5mm diameter, E27 lamp holder.
    Type B Lamp Holder with dimensions.
  • Type C (Iron Lamp Cup with Ring):
    • Overall Height (top to bottom of ring): 32mm + 28mm
    • Ring Diameter: 57mm
    • Base Diameter: 39.8mm
    Diagram of Type C lamp holder with dimensions: 1m wire, woven outer quilt, button switch, EU plug, iron lamp cup, 32mm and 28mm sections, 57mm ring diameter, 39.8mm base diameter, E27 lamp holder.
    Type C Lamp Holder with dimensions.

For E14 specific models, please refer to the E14 diagrams provided in the original product documentation.

Image showing various E14 lamp holder types: smooth, half tooth, and whole tooth, with different plug options.
E14 Lamp Holder variations.

9. User Tips

  • Consider using LED bulbs for energy efficiency and longer lifespan.
  • The woven outer quilt of the wire provides durability and a neat appearance.
  • The integrated switch makes it convenient for bedside lamps or temporary lighting setups.
  • For a more permanent installation, ensure the hanging point is secure and can support the weight of the lamp holder and bulb.

10. Warranty and Support

This product is designed for long and reliable life, made with good quality, exquisite workmanship, and excellent material.

For any questions or support regarding this product, please refer to the original seller or the provided user manual PDF: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.