Tungfull DLJ-16-NO

Contents

Tungfull 16 Inch Cordless Electric Chain Saw User Manual

Model: DLJ-16-NO | Brand: Tungfull

1. Introduction

Thank you for choosing the Tungfull 16 Inch Cordless Electric Chain Saw. This manual provides essential information for the safe and efficient use of your new tool. Please read all instructions carefully before assembly, operation, or maintenance to ensure your safety and prolong the life of the product.

Tungfull 16 Inch Cordless Electric Chain Saw in a forest setting

Image: The Tungfull 16 Inch Cordless Electric Chain Saw, designed for multi-purpose sawing. Batteries are not included and sold separately.

2. Safety Information

WARNING: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, hearing protection, and sturdy footwear when operating the chainsaw.
  • Keep the device and its cord out of reach of children under 3 years old. Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use (wood logging and cutting).
  • Inspect the product thoroughly before each use; do not use if damaged or if any parts are loose.
  • Follow all installation and operation guidelines to avoid injury.
  • As an electrical product, do not expose the chainsaw to water or moisture.
  • This is a sharp and potentially dangerous tool. Handle with extreme care to avoid cuts or other injuries.
  • In case of ingestion of any small parts, seek medical attention immediately.
  • Please be aware of potential fire risks. Strictly follow the instruction manual for charging and storage of lithium-ion batteries.
  • For disposal, check your local authority's website for information on how to safely dispose of lithium-ion batteries and the tool itself in accordance with applicable legal requirements.
  • Ensure your work area is clear of obstructions and bystanders before starting the saw.
  • Maintain a firm grip on both handles of the chainsaw during operation.
Chainsaw in use for logging

Image: The chainsaw is an efficient logging tool, providing smooth cutting without stuttering.

3. Package Contents

Please check the package for the following items:

  • Chainsaw Body (Main Unit)
  • 16-inch Guide Bar
  • Saw Chain (Quenched Chain)
  • Protective Baffle (Front Handle)
  • Wrench / Screwdriver for assembly
  • Charger (for battery, if included in your specific kit)
  • Lithium-ion Battery (Note: Batteries are not included with all models and are sold separately.)
Labeled diagram of chainsaw parts

Image: Key components of the 16-inch chainsaw, including the quenched chain, alloy guide plate, non-slip handle, and battery slot.

4. Assembly Instructions

Follow these steps to assemble your chainsaw. For a visual guide, please refer to the assembly video below.

  1. Remove Cover Plate: Using the provided screwdriver, unscrew the two screws on the red cover plate of the chainsaw body. Carefully remove the cover plate.
  2. Install Saw Chain: Place the saw chain into the groove of the 16-inch guide bar. Ensure the cutting edges of the chain are facing the correct direction for cutting.
  3. Attach Guide Bar and Chain: Align the guide bar and chain assembly with the sprocket on the chainsaw body. Ensure the chain properly engages with the sprocket teeth.
  4. Reinstall Cover Plate: Place the red cover plate back onto the chainsaw body, ensuring it aligns correctly over the guide bar and chain. Insert and tighten the two screws securely.
  5. Install Protective Baffle (Front Handle): Locate the two screws at the front of the chainsaw body where the protective baffle attaches. Unscrew them. Position the protective baffle and secure it by tightening the screws.
  6. Adjust Chain Tension: Find the tension adjustment screw located near the chain on the side of the chainsaw body. Use the provided wrench to adjust the screw. The chain should be snug but still able to be moved freely by hand. It should not be too tight or too loose.
  7. Insert Battery: Once assembly is complete and chain tension is checked, insert a compatible 21V Makita-style lithium-ion battery into the battery slot until it clicks into place.

Video: Detailed assembly and initial setup guide for the Tungfull 16 Inch Cordless Electric Chain Saw.

5. Operation

Your Tungfull Cordless Electric Chain Saw features an upgraded brushless motor, providing double the torque output for easy handling of various wood cutting needs.

  1. Power On: Press and hold the power button for approximately 3 seconds to turn on the device.
  2. Safety Protection Switch: The chainsaw is equipped with a safety protection switch to prevent accidental startup. Ensure this switch is disengaged before attempting to operate the saw.
  3. Changing Modes: Short press the power button to cycle through available operating modes (if applicable to your model).
  4. Cutting Technique:
    • Always maintain a balanced stance and firm grip on both the main handle and the front handle.
    • Start the saw before making contact with the wood.
    • Allow the saw to reach full speed before beginning a cut.
    • Apply steady, even pressure. Do not force the saw through the wood.
    • Be aware of kickback and always position yourself to avoid it.
  5. Power Off: After use, turn off the device by pressing and holding the power button until it shuts down.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your chainsaw.

  • Cleaning: After each use, turn off the saw and remove the battery. Clean the guide bar, chain, and motor housing to remove sawdust, debris, and resin.
  • Chain Sharpening: A sharp chain is crucial for efficient and safe cutting. Sharpen the chain regularly or replace it when dull. Refer to specialized guides for proper chain sharpening techniques.
  • Guide Bar Maintenance: Periodically clean the guide bar groove to ensure smooth chain movement. Check for burrs on the guide bar rails and file them smooth if necessary.
  • Battery Care: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. Do not expose the battery to water or moisture. Follow the manufacturer's charging instructions.
  • Storage: When not in use, turn off the device, remove the battery, and store it in a dry place, out of reach of children.

7. Troubleshooting

If you encounter issues with your chainsaw, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Chainsaw does not start
  • Battery not inserted correctly or discharged.
  • Safety protection switch engaged.
  • Power button not held long enough.
  • Ensure battery is fully charged and properly inserted.
  • Disengage the safety switch.
  • Press and hold the power button for 3 seconds.
Chain does not move or moves slowly
  • Chain tension too tight.
  • Chain or guide bar is dirty/clogged.
  • Dull chain.
  • Adjust chain tension (refer to Assembly section).
  • Clean the guide bar groove and chain.
  • Sharpen or replace the chain.
Excessive vibration or noise
  • Loose components.
  • Damaged chain or guide bar.
  • Check all screws and ensure they are tightened.
  • Inspect chain and guide bar for damage; replace if necessary.

8. Specifications

FeatureDetail
Product NameLithium-ion Saw
ModelDLJ-16-NO
Brand NameTungfull
Saw TypeChain Saw
Bar Length16 Inch
Power SourceBattery (Compatible with Makita 21V batteries)
Battery IncludedNo (Sold Separately)
OriginMainland China
ManufacturerShenZhen Tungfull Digital Technology Co., Ltd
Package Weight2.459 kg
Package Dimensions46 cm (L) x 16 cm (W) x 16 cm (H)

9. User Tips

  • Battery Compatibility: This chainsaw is designed to be compatible with Makita 21V batteries. Ensure you use genuine or high-quality compatible batteries for optimal performance and safety.
  • Chain Tension: Always double-check chain tension before and during extended use. Proper tension prevents the chain from derailing and ensures efficient cutting. A chain that is too loose can come off, while one that is too tight can cause excessive wear and reduce motor efficiency.
  • Lubrication: While not explicitly mentioned for this model, many chainsaws benefit from chain lubrication. If your model has an oil reservoir, keep it filled with appropriate chain oil. If not, consider manual lubrication for heavy use.

10. Warranty and Support

For any warranty claims, technical support, or further inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

You can also refer to the official user manual PDF for additional details: User Manual (PDF)

Manufacturer Contact Information:

  • Manufacturer: ShenZhen Tungfull Digital Technology Co., Ltd
  • Address: A302, Building 25, Hong Chao Yuan, ChangFa Mid Road, BanTian Subdistrict, LongGang District, ShenZhen
  • E-mail/Tel: 56827370@qq.com / 86-15089309815

11. Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Country of Origin: Made in China

Compliance Marks: CE, UKCA, RoHS, FCC

(For detailed compliance information and declarations, please refer to the full User Manual PDF.)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.