1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your CARABC Wireless CarPlay & Android Auto Adapter. This device integrates Apple CarPlay and Android Auto functionalities into your Audi A8's original MMI 3G system, enhancing your driving experience with smart navigation, communication, and entertainment features.

Image: The CARABC adapter unit shown with icons for CarPlay, Android Auto, Mirroring, and Navigation, demonstrating its integration into an Audi A8 dashboard.
2. Product Information
2.1. Package Contents
Please check the package for the following items:
- CARABC Main Adapter Unit
- LVDS Cable (1 pcs)
- Power Cable
- Wi-Fi Antenna

Image: The main CARABC adapter unit.
2.2. Key Features
- CarPlay/Android Auto: Seamless integration of your smartphone for navigation, music, calls, and more. Supports both wireless and wired connections.
- Dual System Switch: Easily switch between the original car system and the CarPlay/Android Auto interface.
- Mirroring Link: Stream content from your Apple or Android device directly to your car's display.
- Smart Voice Assistant: Utilize Siri or Google Voice for hands-free control and assistance.
- Online Navigation: Supports popular navigation apps like Waze, Google Maps, and Apple Maps with real-time traffic updates.
- HD Rear Camera Support: Automatically switches to the reversing image when the vehicle is in reverse gear, enhancing safety.
3. Compatibility
This adapter is designed for:
- Audi A8 models from 2012 to 2018
- Equipped with the MMI 3G system (7-inch display)
3.1. How to Verify Your Car System
To ensure compatibility, check your MMI system's software version:
- Press the "Setup" or "Menu" button on your radio.
- Go to "Settings".
- Scroll down to "Version Information".
- Look for the first letters and numbers of the software version. Compatible systems typically show "HN+_US_AU_P0121" or similar for MMI 3G+.

Image: Audi MMI screen showing "Setup MMI Version information" with software version details, confirming MMI 3G+ compatibility.
4. Specifications
| Parameter | Value |
|---|---|
| Operating Voltage | 9 - 16 V |
| Operating Temperature | -30 ~ +75°C |
| Stored Temperature | -30 ~ +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption | 500mA (rated), 3A (Max) |
| Shutdown Current | 3 mA (Clock is on) |
| Quiescent Current | Less than 3 mA |
| Charging Current | ≤2A (when USB charging current > 1A, host activates circuit protection to control current below 1.5A) |
5. Installation
CAUTION: Installation should ideally be performed by a qualified professional. Disconnect the car's battery before starting any installation work.
5.1. Wiring Diagram

Image: Detailed wiring diagram for the CX-3GA8 adapter, showing connections to the original head unit, power, camera, and other peripherals.
Follow the diagram carefully for all connections:
- LVDS: Connect to the original head unit.
- Power:
- Yellow: B+ (Battery Positive)
- Red: ACC (Accessory Power)
- Black: GND (Ground)
- Blue: Camera Power Supply - Reverse Detect: Brown wire.
- 360-RX: White and Black wires.
- MIC: Extra Microphone port.
- REAR-CVBS: Rear View Camera input.
- FRONT-CVBS: Front View Camera input.
- AUX: Audio output.
- USB: Connect phone, USB disk, or for software updates.
5.2. Video Cable Port Identification
Locate the correct video cable port on your car's head unit for connection.
5.3. Physical Placement
The main adapter unit and the air conditioning panel adapter should be placed securely within the dashboard area, ensuring no wires are pinched and connections are firm.
6. DIP Switch Configuration
CAUTION: Please ensure the CarPlay POWER is disconnected when adjusting the DIP switches. Once the DIP switches are set, then connect CarPlay POWER.
The DIP switches control various functions of the adapter. Refer to the diagram below for settings:
ON 1 2 3 4 5 6 7 8
OFF [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
OFF: [ ] ON: [ ]
3--- ON
8--- ON
other--- OFFSpecific functions for each DIP switch setting (3---ON, 8---ON, other---OFF) should be configured according to your vehicle's specific requirements or desired features. Consult the full PDF manual for detailed explanations if needed.
7. Operation
7.1. Dual System Switching
To switch between the original car system and the CarPlay/Android Auto interface, long-press the central control knob.
7.2. Wireless CarPlay Connection
- On your iPhone, open Wi-Fi and Bluetooth.
- On the car's display, navigate to "Discover and connect device".
- Select the Bluetooth device name starting with "CX_BT....." and pair your iPhone.
7.3. Wireless Android Auto Connection
- On your Android phone, open Wi-Fi and Bluetooth.
- On the car's display, click on "CX-BTXXXX" (where XXXX is a unique identifier) and pair your device.
7.4. Using Voice Assistant

Image: Visual representation of Siri Voice and Google Voice integration.
Long-press the central control knob to activate Siri or Google Voice for hands-free commands.
7.5. Online Navigation

Image: Icons for Waze, Google Maps, and Apple Maps, indicating support for various navigation applications.
Access your preferred navigation apps (Waze, Google Maps, Apple Maps) directly from the CarPlay or Android Auto interface.
7.6. HD Rear Camera Functionality

Image: Car display showing a rear camera view with parking guidelines.
When a compatible rear camera is installed and the vehicle is shifted into reverse, the system will automatically display the camera feed.
8. Car Settings
After installation, you may need to adjust certain settings within the car's system and the adapter's interface.
8.1. Reverse Camera Settings
- Ensure "Reverse camera added" is enabled and "original camera" is turned off in the adapter's settings if using an aftermarket camera.
- Configure parking guidelines and distance control as needed.
8.2. Audio Settings
- If your original car has Bluetooth phone functionality, you typically do not need to add an external microphone.
- In the adapter's audio settings, set "use the original Bluetooth audio" to "on".
- For audio playback, ensure your cell phone's Bluetooth is connected to the original car's Bluetooth audio, and select Bluetooth audio playback.
- Select "AUX" as the original multimedia input for audio output from the adapter.
8.3. Reversing Camera Wiring
- Cam-power: Connect to the camera's power supply.
- Rear-CVBS/AHD720P (25FPS/30FPS): Connect to the camera input.
9. Troubleshooting
If you encounter issues, please refer to the following common problems and solutions:
- Screen Not Displaying Normally:
- Check the LVDS cable connection to ensure it is securely fastened.
- Verify the DIP Switch settings are correct according to your vehicle's configuration. - Sound Problems:
- Ensure the original car's Multimedia system settings are correct.
- Check the adapter's install system settings within the original car's interface. - Mainframe Pilot Lamp Not Working:
- Inspect the power cable connection to ensure it is secure.
- Check the fuse for the power cable; replace if blown.
10. User Tips
No specific user tips are available at this time. For optimal performance, ensure your smartphone's operating system is up-to-date.
11. Support
For more detailed information, specific wiring diagrams, or advanced settings, please refer to the complete user manual PDF:
If you require further assistance, please contact CARABC customer support.