AUXITO H4 H7 H8 H9 H11 H16(JP) 9005 HB3 9006 HB4 9012 HIR2 9007 HB5 9008 H13 9004(HB1) 9145 9140

Contents

AUXITO Car LED Headlight Bulb User Manual

Models: H4, H7, H8, H9, H11, H16(JP), 9005/HB3, 9006/HB4, 9012/HIR2, 9007/HB5, 9008/H13, 9004/HB1, 9145, 9140

1. Product Overview

The AUXITO Car LED Headlight Bulbs are designed to provide superior illumination for your vehicle, offering a brighter and clearer light output compared to traditional halogen bulbs. These fanless LED bulbs are engineered for easy installation and long-lasting performance.

Two AUXITO A1 Series LED headlight bulbs with their packaging.
Figure 1: AUXITO A1 Series LED Light Bulbs and packaging.

Key Features:

  • 1:1 Size Design for easy installation, matching halogen bulb dimensions.
  • Perfect light beam pattern to avoid blinding oncoming drivers.
  • Fanless design for quiet operation and enhanced durability.
  • Up to 900% brighter than standard halogen bulbs.
  • 6500K Cool White light for improved visibility.
  • IP68 Waterproof rating for all-weather performance.
  • Long lifespan of over 60,000 hours.
  • 99% Vehicle Compatibility with zero Canbus errors for most vehicles.

Package Contents:

  • 2 x AUXITO A1 Series LED Headlight Bulbs
  • 1 x Product Manual
  • 1 x Pair of Gloves
Image showing two AUXITO A1 Series LED lamps, representing the package contents.
Figure 2: Contents of the AUXITO LED Headlight Bulb package.

2. Safety & Warnings

⚠ WARNING: CHOKING HAZARD - Small parts. Not for Children under 3 years.

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Always wear protective gloves during installation.
  • Ensure the vehicle's engine is off and the battery is disconnected before starting installation.
  • Avoid touching the LED chips directly to prevent damage.
  • Do not look directly into the LED light when it is on, as it can cause eye strain or damage.
  • Keep the product away from moisture and extreme temperatures outside of its operating range.

3. Specifications

Attribute Value
LED Type 7035 LED Chips
Voltage DC 11-18V (for 12V cars only)
Wattage 50W/pair
Lumens 12000LM/pair
Color Temperature 6500K White
Housing Material Aviation Aluminum
Waterproof Rate IP68
Working Lifetime > 60,000hrs
Working Temperature -40°F ~ +176°F (-40°C ~ +80°C)
Fit Plug Types H8, H9, H11, H16(JP), 9005/HB3, 9006/HB4, 9004/HB1, 9007/HB5, 9003/H4, 9012/HIR2, 9008/H13, 9145, 9140
Application Replacement for car headlight
Origin Mainland China
Certification CE
LED headlight bulb being splashed with water, illustrating its IP68 waterproof rating and suitability for various weather conditions like rainy, foggy, snowy, and dusty.
Figure 3: IP68 Waterproof rating ensures durability in all weather conditions.

4. Setup & Installation

These LED headlight bulbs are designed for a 10-minute, plug-and-play installation without bulky bases or external drivers. Always ensure your vehicle is off and cool before beginning installation.

Diagram showing a 1:1 size comparison between a halogen bulb and an AUXITO LED bulb, followed by three steps for installation: insert, twist, and connect.
Figure 4: 10-Minute Plug & Play Installation Guide.

General Installation Steps (for H11, H8, H9, H16(JP), 9005/HB3, 9006/HB4, 9012/HIR2, H10, 9145, 9140):

  1. Remove Original Bulb:
    • Remove the dust cover (if present).
    • Disconnect the electrical plugs.
    • Turn the original bulb counter-clockwise to unlock and remove it from the light housing.
  2. Insert LED Bulb:
    • Align the tab parts of the LED bulb with the groove sections of the light housing.
    • Gently insert the LED bulb into the housing.
  3. Secure LED Bulb:
    • While pressing down on the LED bulb, turn it clockwise until it locks securely in place.
  4. Connect Plug:
    • Connect the electrical plug to the LED bulb.
  5. Test and Finish:
    • Power on your vehicle and test the lights.
    • If functioning correctly, replace the dust cover (if applicable).

For visual aids and detailed diagrams for specific bulb types (H11, H8, H9, 9008, H13, 9005, HB3, 9006, HB4, 9012, HIR2, H10, 9145, 9140), please refer to page 3 of the official user manual PDF.

Installation Steps for 9004(HB1)/9007(HB5):

  1. Remove Original Bulb:
    • Remove the dust cover (if present).
    • Disconnect the plug.
    • Rotate the original bulb holder counter-clockwise and remove it.
    • Remove the original bulb from the holder.
  2. Insert LED Bulb:
    • Insert the new LED bulb into the light housing.
  3. Secure Light Holder:
    • Insert the vehicle's original light holder into the light housing, rotate clockwise, and lock it in place.
  4. Connect Plug:
    • Connect the electrical plug.
  5. Test and Finish:
    • Power on your vehicle and test the lights.
    • If functioning correctly, replace the dust cover (if applicable).

For visual aids and detailed diagrams for 9004(HB1)/9007(HB5) bulb types, please refer to page 4 of the official user manual PDF.

Installation Steps for 9003(H4):

  1. Remove Original Bulb:
    • Remove the dust cover (if present).
    • Disconnect the plug.
    • Press down and release the buckle holding the bulb.
    • Remove the original bulb.
  2. Insert LED Bulb:
    • Align the tab parts of the LED bulb with the groove sections of the light housing.
    • Insert the LED bulb.
  3. Secure LED Bulb:
    • Put the buckle back to secure the LED bulb.
  4. Connect Plug:
    • Connect the electrical plug.
  5. Test and Finish:
    • Power on your vehicle and test the lights.
    • If functioning correctly, replace the dust cover (if applicable).

For visual aids and detailed diagrams for 9003(H4) bulb types, please refer to page 4 of the official user manual PDF.

5. Operating Instructions

Once installed, the AUXITO LED headlight bulbs operate like your vehicle's original headlights. Simply use your vehicle's standard headlight switch to turn them on and off, and to switch between low and high beams (if applicable to the bulb type and vehicle wiring).

Comparison image showing a road illuminated by crisp white 6500K LED light versus tired yellow 4000K halogen light, emphasizing improved visibility.
Figure 5: Experience clearer and safer driving with AUXITO LED headlights.

6. Maintenance

AUXITO LED headlight bulbs are designed for minimal maintenance. Follow these general guidelines:

  • Cleaning: Periodically check your headlight lenses for dirt, dust, or debris. Clean them with a soft cloth and appropriate automotive cleaning solution to ensure maximum light output.
  • Inspection: Occasionally inspect the bulbs and wiring for any signs of damage or loose connections.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners or solvents directly on the LED bulbs or their components.
Image illustrating the long lifespan of AUXITO LED bulbs, stating 60,000+ hours and comparing 1 AUXITO LED to 150 halogen bulbs.
Figure 6: The extended lifespan of AUXITO LED bulbs reduces maintenance frequency.

7. Troubleshooting

If you encounter issues with your AUXITO LED headlight bulbs, refer to the following common problems and solutions:

Flickering/Error Warning:

For some sensitive vehicles (e.g., Jeep, Chrysler, Dodge Ram, GMC, Ford), you might experience flickering or error warnings after installing LED bulbs. This is often due to the vehicle's Canbus system. Please contact AUXITO for proper decoders/resistors to resolve the problem.

Diagram showing a car dashboard with a warning light, indicating a potential Canbus error, alongside an AUXITO LED bulb. Text highlights 99% vehicle compatibility, no error, no flickering, zero Canbus error, with a note about sensitive cars.
Figure 7: Vehicle compatibility and potential Canbus error solutions.

No Light:

  1. Check all wires to ensure they are connected properly and fuses are functioning.
  2. If only one bulb works, swap the left and right side bulbs to determine if it's a Canbus problem or a defective bulb.

Light is Dim:

  • Check to ensure the bulbs are locked securely into place.
  • Verify that the LED chips are clean and intact.

Conditions Beyond Warranty Scope:

  • Canbus Problem: Vehicles with Canbus systems may experience flickering or error warnings. Suitable decoders are required. If decoders don't work, a full refund may be available.
  • Installation Problem: Some vehicles may have limited installation space, preventing proper bulb fitment.
  • Natural Disaster: Damages caused by natural disasters (e.g., earthquake, flood) are not covered.

8. Warranty & Support

AUXITO offers a 12-month warranty on its products. If you experience any issues, please contact us through the AliExpress message system.

How to Claim Warranty:

  1. Take a clear photo showing the code located on the bottom of the lamp.
  2. Send the pictures to AUXITO customer support. Replacements will be arranged after verification.
Diagram illustrating the efficient cooling system of the LED bulb, highlighting components like the pure copper base, temp-control chips, uniform heat dissipation holes, and integrated aluminum alloy body.
Figure 8: The robust design contributes to product longevity and reliability.

For further assistance or inquiries, you can contact AUXITO Direct Store. All messages are typically replied to within 24 hours.

For a comprehensive guide and additional diagrams, please refer to the official user manual PDF: AUXITO Car LED Headlight User Manual (PDF).

9. User Tips

  • Beam Pattern Adjustment: After installation, it's recommended to check and adjust your headlight beam pattern to ensure optimal visibility and prevent dazzling other drivers.
  • Compatibility Check: Always double-check your vehicle's bulb type before purchasing to ensure correct fitment.
  • Professional Installation: If you are unsure about the installation process, consider seeking professional assistance to avoid damage to the bulbs or your vehicle.

10. Frequently Asked Questions (FAQ)

Q: Do these bulbs require any modifications to my vehicle?
A: For most vehicles, these bulbs are plug-and-play replacements. However, some sensitive vehicles with Canbus systems may require an additional decoder to prevent flickering or error messages.
Q: What is the color temperature of these LED bulbs?
A: The bulbs emit a 6500K cool white light, providing excellent visibility.
Q: Are these bulbs suitable for both low and high beams?
A: This depends on your vehicle's headlight design and the specific bulb type. Many dual-filament halogen replacements (like H4/9003) will function as both low and high beams. Single-filament replacements (like H11, 9005) will replace the corresponding low or high beam function.

11. Compliance Information

Manufacturer & EU Representative:

Manufacturer: SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD

EU Authorized Representative: APEX CE SPECIALISTS LIMITED

  • Address: NO.504, BUILDIND 225, BULONG ROAD, MAANTANG COMMUN BANTIAN STREET, LONGGANG SHENZHEN 518028 GUANGDONG
  • EU Representative Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
  • Contact: Wells Yan
  • Email: Info@apex-ce.com
  • Postal code: 40237
  • Tel: +49 21312066043

Certifications:

This product complies with CE and RoHS standards.

♻ MADE IN CHINA

Recycling Information:

This appliance and its accessories are recyclable. Please dispose of them at designated collection points. Prioritize repair or donation of your device.

For more information on collection points, visit www.quefairedemesdechets.fr.

© 2023 AUXITO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.