Acasis H004

Contents

Acasis H004 4-Bay USB4 Enclosure User Manual

Model: H004

Introduction

The Acasis H004 is a high-performance 4-bay enclosure designed for expanding storage capacity and enhancing data transfer speeds. It supports a massive 76TB of storage, including both HDDs and M.2 SSDs, and features a 40Gbps USB4 interface compatible with Thunderbolt 3/4/5 hosts. With support for DP 8K video output and multiple RAID modes, it is an ideal solution for data backup, video editing, and other demanding applications on both PC and Mac systems.

Acasis 4-bay enclosure with 40Gbps, 8K60Hz, tool-free installation, and up to 76TB storage features highlighted.

Figure 1: Acasis H004 4-Bay USB4 Enclosure

Setup

1. Package Contents

Before proceeding, please verify that all components are present in the package:

  • Acasis H004 4-Bay USB4 Enclosure
  • Power Adapter
  • USB4 Cable
  • User Manual (PDF available at Acasis H004 User Manual PDF)
  • (Other accessories as specified in the full manual)

2. Drive Installation

The Acasis H004 enclosure supports tool-free installation for various drive types:

  • Two (2) 3.5-inch SATA HDDs (up to 30TB each)
  • Two (2) 2.5-inch SATA SSDs
  • Two (2) NVMe M.2 SSDs (up to 8TB each)

To install drives:

  1. Gently pull out the drive trays from the front of the enclosure.
  2. Mount your 3.5" HDD, 2.5" SSD, or NVMe M.2 SSD onto the appropriate tray. Ensure secure fitting.
  3. Slide the loaded tray back into the enclosure until it clicks into place.
Diagram showing wide drive compatibility for 3.5 inch HDD, 2.5 inch SSD, and NVMe M.2 SSD.

Figure 2: Wide Drive Compatibility

3. Connecting to Host Device

Connect the enclosure to your computer using the provided USB4 cable. The 40Gbps high-speed interface is compatible only with USB4, Thunderbolt 3, Thunderbolt 4, and Thunderbolt 5 hosts for optimal performance.

Acasis enclosure connected to a laptop and monitor, illustrating 40Gbps high-speed interface compatible with USB4, Thunderbolt 3/4/5 hosts.

Figure 3: 40Gbps High-Speed Interface Connection

4. DisplayPort Connection

The enclosure features a DisplayPort output supporting up to 8K@60Hz. It is downward compatible with 4K at 144Hz/120Hz and 2K at 240Hz/120Hz. Connect your monitor to the DisplayPort on the enclosure for extended display capabilities.

Acasis enclosure connected to a laptop and an 8K monitor, demonstrating 8K@60Hz DisplayPort output.

Figure 4: 8K@60Hz DisplayPort Output

Operating Instructions

1. Power On/Off

Connect the power adapter to the enclosure and a power outlet. Press the power button on the front of the enclosure to turn it on. The power indicator will illuminate.

2. Drive Status Indicators

The front panel features smart drive status indicators to monitor the health and activity of your installed drives:

  • Solid Blue: Indicates power on, drive access, or backup complete.
  • Flashing Blue: Indicates data reading in progress.
  • Solid Red: Indicates a drive error.
  • Flashing Red & Blue: Indicates RAID 1 data syncing.
Front view of the Acasis enclosure showing LED indicators and their meanings: Solid Blue for Power/Access/Backup, Flashing Blue for Reading, Solid Red for Drive Error, Flashing Red & Blue for RAID 1 Syncing.

Figure 5: Smart Drive Status Indicators

3. RAID Modes

The Acasis H004 supports 4 RAID modes for data management and redundancy. Specific configuration details for each RAID mode (e.g., RAID 0, RAID 1) can be found in the detailed PDF user manual. Please refer to the manual for instructions on how to set up and manage your desired RAID configuration.

4. Data Transfer Performance

Leverage the 40Gbps USB4 interface for high-speed data transfer. Performance may vary based on the type of drives used (HDD vs. SSD), RAID configuration, and the capabilities of your host system.

Disk Speed Test results table showing Blackmagic RAW, ProRes 422 HQ, H.265 read/write speeds for various resolutions and formats.

Figure 6: Example Disk Speed Test Results

Maintenance

  • Keep the enclosure clean and free from dust. Use a soft, dry cloth for cleaning.
  • Ensure adequate ventilation around the enclosure to prevent overheating.
  • Avoid exposing the device to extreme temperatures or humidity.
  • Regularly back up your data, especially when using non-redundant RAID modes (e.g., RAID 0).

Troubleshooting

  • Device Not Recognized:
    • Ensure the USB4 cable is securely connected to both the enclosure and your host device.
    • Verify that your host device supports USB4 or Thunderbolt 3/4/5. The enclosure may not function correctly with standard USB-C ports.
    • Check if the power adapter is properly connected and the enclosure is powered on.
  • Slow Data Transfer Speeds:
    • Confirm that your host device and cable support 40Gbps USB4/Thunderbolt speeds.
    • Check the health and performance of the installed drives.
    • Ensure the correct RAID mode is configured for your performance needs.
  • Drive Error (Solid Red LED):
    • A solid red LED indicates a drive error. Power off the enclosure, remove the affected drive, and inspect it.
    • If the drive is faulty, replace it. If the issue persists with a new drive, contact support.
  • SSDs Not Available in RAID 1 (or other specific configurations):
    • Some configurations, particularly with SSDs in certain RAID modes, might require a Thunderbolt 4 port on the host device. If you are using a standard USB-C port, SSD slots might not be fully available in all RAID configurations. Refer to the detailed manual for specific compatibility notes.
  • Discrepancy in Read/Write Speeds:
    • Performance can be affected by the specific SSD models, RAID controller, and the software used for testing. Ensure your SSDs are genuine and in good health. Verify your RAID configuration is correctly set up for optimal speed (e.g., RAID 0 for striping).

Specifications

Feature Specification
Brand Name Acasis
Model Number H004
Internal Interface M.2 NVMe/SATA
Transfer Speed 40 Gbps (USB4 / Thunderbolt 3/4/5 compatible)
Supporting Hard Drive Capacity Up to 76TB (2x 30TB SATA HDD + 2x 8TB M.2 SSD)
Drive Compatibility 3.5" HDD, 2.5" SSD, NVMe M.2 SSD
Display Output DP 8K@60Hz (downward compatible with 4K 144Hz/120Hz, 2K 240Hz/120Hz)
RAID Modes 4 RAID Modes (e.g., RAID 0, RAID 1)
Package Dimensions (L x W x H) 30 cm x 19 cm x 16 cm
Package Weight 2.575 kg

User Tips

  • For optimal performance, ensure your host computer has a genuine USB4 or Thunderbolt 3/4/5 port.
  • If you encounter issues with SSDs not being recognized in certain RAID modes (e.g., RAID 1), especially when using USB-C ports, verify your host's Thunderbolt version. Full SSD functionality in all RAID configurations might be limited to Thunderbolt 4 or higher.
  • When testing read/write speeds, use reliable benchmarking software and ensure your drives are healthy and correctly configured for the desired performance (e.g., RAID 0 for maximum speed).
  • The enclosure is generally reported to deliver on its promises regarding file transfer speed when correctly set up.

Warranty and Support

For detailed warranty information, technical support, and service inquiries, please refer to the official Acasis website or the comprehensive user manual PDF provided with your product. The PDF manual contains in-depth instructions and diagrams that may be helpful for advanced configurations and troubleshooting.

User Manual (PDF): Acasis H004 User Manual PDF

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.