RGBIC WS2812

Contents

RGBIC TV Backlight WS2812 Camera Ambient Light LED Strip Instruction Manual

Model: WS2812

1. Introduction

The RGBIC TV Backlight with Camera Ambient Light is designed to enhance your viewing experience by synchronizing LED lighting effects with the colors displayed on your TV or PC screen. This system creates an immersive home theater atmosphere, reacting dynamically to movies, games, and music. Control is available via a multifunctional remote control and a dedicated smartphone application.

RGBIC TV LED Backlight kit showing LED strip, camera, remote control, and smartphone app interface.
RGBIC TV LED Backlight kit showing LED strip, camera, remote control, and smartphone app interface.

Video demonstrating the RGBIC TV Backlight's dynamic color syncing with screen content, music rhythm mode, and smartphone app control for custom settings.

2. Safety Information

WARNING!

  • To avoid danger of suffocation, keep any plastic packaging away from babies and children.
  • Do not use this product's packaging in cribs, beds, carriages, or playpens. This bag is not a toy.
  • This product is intended for domestic use only.

3. Package Contents

Please check the package for the following items:

  • RGBIC LED Strip (length and LED density vary by model)
  • AR Sensor 1080P Capture Camera
  • Controller
  • Multifunctional Remote Control
  • USB Power Cable
  • Mounting Clips

4. Specifications

General Specifications
AttributeValue
Product ModelWS2812
Input VoltageUSB 5V
Nominal Voltage5V
Power SourceDC
LED Chip ModelSMD5050
Chip ModelWS2812 RGBIC (WS2812B - Single Point Single Control)
Number of LED Beads / m30/60
Power Consumption (W/m)11.52W/m (for 60LEDs/m) / 9W/m (for 30LEDs/m)
Luminous Flux249-2000
Beam Angle120 Degrees
Color TemperatureRGB-IC
Waterproof RatingIP20 (Non-Waterproof)
Strip TypeSMD
Strip Thickness2mm (Bare Board)
Strip WidthBare board 10mm
Cutting SizeCan be cut at the solder joint of each LED
Power GenerationLight
Is Smart DeviceYes
Is Batteries IncludedNo
CertificationCE, RoHS
OccasionLiving room
Operating Temperature-15°C to 50°C
Applicable Screen Sizes and LED Strip Lengths
Device TypeScreen SizeLED DensityStrip Length
PC Kit24 inch5V 30/60LED1M
27 inch1.2M
32/34 inch1.5M
34 inch1.5M
TV Kit40-50 inch5V 30LED3M
55-60 inch4M
75-85 inch5M

Note: The TV kit is not compatible with the 2812 model at 60 LEDs per meter. If a 60 LEDs/m version is ordered for a TV kit, a 30 LEDs/m version will be supplied instead.

Table detailing LED strip attributes including product model, operating voltage, power consumption, light source, emitting angle, strip width, IC type, and cutting size.
Detailed LED Strip Attributes
Diagram illustrating LED strip features: 5050 chip with pure gold wire and copper bracket, cuttable sections, and adhesive backing.
LED Strip Features: 5050 Chip, Cuttable, Adhesive Backing
Diagram showing the dimensions of the WS2812 LED strip for both 30 LEDs/m and 60 LEDs/m configurations.
LED Strip Dimensions for 30 LEDs/m and 60 LEDs/m

5. Setup & Installation

The installation process is designed to be simple and user-friendly, typically taking less than 10 minutes.

Installation Steps:

  1. Prepare the Surface: Ensure the back of your TV or PC monitor is clean and dry.
  2. Attach the LED Strip: Peel off the adhesive backing from the LED strip. Carefully stick the strip to the back of your TV/PC. Slightly bend the strip at corners to ensure full coverage. Secure the strip with the provided clips for extra stability. The strip can be cut at designated solder joints if a shorter length is required.
  3. Mount the Camera: Position the AR Sensor 1080P Capture Camera at the top center of your TV/PC monitor, ensuring it has a clear view of the screen.
  4. Connect Components: Connect the LED strip and the camera to the controller.
  5. Power Supply: Connect the controller to a 5V USB power adapter. Ensure the adapter output is ≤5V. It is recommended to select an adapter and controller according to your specific needs.
Installation steps for the LED strip, showing how to peel off backing, stick to TV, bend at corners, and secure with clips. Also shows where the strip can be cut.
Visual Guide for LED Strip Installation

Wiring Diagram:

Final connection diagram for LED strip installation on a TV, showing input voltage 5V.
Final connection diagram for LED strip installation on a TV, showing input voltage 5V.

DC5V-3pin Connection (Please Use 5V Power):

  • POWER (DC5V): Connect to the main power source.
  • Controller: Connect the controller's GND, DATA, and +5V pins to the corresponding points on the LED strip.
  • LED Strip: Ensure the LED strip's GND, DATA, and +5V connections align with the controller.
Diagram showing the AR sensor 1080P capture camera mounted on top of a TV, syncing screen colors with the LED backlight.
AR Sensor 1080P Capture Camera for Screen Color Sync

6. Operating Instructions

Smartphone App Control:

  1. Enable Bluetooth: Ensure Bluetooth is enabled on your mobile phone.
  2. Download App: Scan the QR code provided on the remote control or packaging to download the official control application.
  3. Connect Device: Open the app and click the "+" icon (usually in the upper left corner) to search for and connect to your RGBIC TV Backlight device.
  4. Start TV Sync: Within the app, navigate to the device settings and activate the TV Sync function.
  5. Rhythm Settings: The app allows you to configure rhythm settings. The light strip typically shows that the first segment is clockwise on the left and counterclockwise on the right. You can select the color of each strip segment by sliding the color bar.
  6. Explore Modes: The app offers various modes including Musical Mode, Rainbow Mode, and Scene Mode. You can also save and share DIY lighting styles.
Smartphone app interface for controlling the RGBIC LED strip, showing options for musical mode, rainbow mode, and scene mode.
Smartphone App Control Interface

Multifunctional Remote Control:

The included remote control provides convenient access to various functions even without your smartphone.

Multifunctional remote control for the RGBIC LED strip, showing various buttons for power, mode, speed, color, and music rhythm.
Multifunctional Remote Control
Detailed diagram of the remote control buttons and their functions, including power, brightness, speed, color selection, timed off, and rhythm modes.
Remote Control Button Functions
  • ON/OFF: Power on/off the lights.
  • MODE+/-: Cycle through different lighting patterns.
  • SPEED+/-: Adjust the speed of dynamic lighting effects.
  • BRIGHTNESS+/-: Adjust the brightness of the lights.
  • Color Selection Buttons (R, G, B, Yellow, Blue, Purple, White): Directly select static single colors.
  • Timed Off Buttons (1H, 2H, 3H, 4H): Set a timer for the lights to turn off automatically.
  • COLOR Button: Access 16 color switch options.
  • Rhythm Buttons (1-2, 3-4): Activate different music rhythm modes.
  • Code Matching Function: For pairing the remote with the controller.

Smart Voice Control:

Manage the TV LED lights with simple voice commands through compatible voice assistants or speakers.

Examples of ambient lighting effects for daily use, movie watching, gaming, and music, created by the RGBIC LED strip.
Ambient Lighting for Various Activities (Daily Use, Movie, Gaming, Music)

7. Maintenance

  • Cleaning: Gently wipe the LED strip and camera with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
  • Storage: If storing the product for an extended period, ensure it is disconnected from power and kept in a cool, dry place.
  • Adhesive: The adhesive backing is designed for firm installation. Avoid frequent repositioning to maintain adhesion.

8. Troubleshooting

  • Lights not turning on: Check all power connections. Ensure the USB adapter is providing 5V power. Verify the controller is properly connected to the LED strip and power source.
  • Colors not syncing correctly: Ensure the AR Sensor Camera is properly positioned and has a clear view of the screen. Check app settings for correct synchronization mode.
  • Remote control not working: Check the remote's battery. Ensure the remote is paired with the controller (refer to code matching function in operating instructions).
  • App connectivity issues: Ensure Bluetooth is enabled on your phone and the device is within range. Try restarting the app and the LED system.
  • Inconsistent LED density: Be aware that for TV kits, a 30 LEDs/m strip might be supplied even if a 60 LEDs/m version was expected. This is a known variation.
  • Controller limitations: Some controllers may have a limit on the number of LEDs they can control (e.g., 150 LEDs). If you experience issues with longer strips, this could be a factor.

9. User Tips

  • Verify LED Density: When ordering, especially for TV kits, confirm the actual LED density (LEDs per meter) you will receive, as there might be discrepancies between advertised and supplied products (e.g., 30 LEDs/m instead of 60 LEDs/m).
  • Controller Capacity: If you plan to use a very long LED strip or multiple strips, check the controller's maximum LED capacity. Some controllers may be limited to a certain number of LEDs (e.g., 150 LEDs), which could affect performance or functionality if exceeded.

10. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for further reference.

Reference: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.