KKMOON RTU5024 4G

Contents

KKMOON RTU5024 4G GSM Remote Control Gate Opener

User Manual

1. Introduction

The KKMOON RTU5024 is a 4G GSM Remote Control Gate Opener designed for controlling sliding gates, swing gates, and garage doors. It allows remote switching ON/OFF via a free call from authorized numbers. This device supports up to 200 authorized users and offers smart ID recognition for enhanced security and convenience.

KKMOON RTU5024 4G Gate Opener with antenna and smartphone showing 'OPEN' button

Figure 1: KKMOON RTU5024 4G GSM Remote Control Gate Opener in operation.

2. Safety Information

Please read and understand all safety instructions before installing and operating the device. Failure to follow these instructions may result in injury or damage to the product.

  • Always ensure the power supply is disconnected before performing any installation or maintenance.
  • Install the control unit in a hidden, secure location to prevent unauthorized access and tampering.
  • Avoid exposing the device to water or excessive moisture to prevent electrical hazards and damage.
  • Ensure all electrical connections are secure and properly insulated.
  • This device is intended for controlling gates and doors; do not use it for purposes other than its intended use.

3. Package Contents

Please check the package for the following items:

  • 1 x RTU5024 4G Gate Opener Unit
  • 1 x Antenna
  • 2 x Terminal Connectors (for power and relay output)
  • 1 x User Manual (PDF version available for download)
KKMOON RTU5024 4G Gate Opener unit with antenna and terminal blocks

Figure 2: Contents of the RTU5024 package.

4. Product Overview

Familiarize yourself with the components and indicators of the RTU5024 unit:

Diagram of RTU5024 unit with labeled components: Signal light, Relay light, Power port, Normal open, Com, Normal close

Figure 3: RTU5024 Component Identification.

  1. Signal light: Indicates network signal status.
  2. Relay light: Indicates relay activation status.
  3. Power port: DC 9-15V power input.
  4. NO (Normal Open): Relay output terminal.
  5. COM (Common): Relay output terminal.
  6. NC (Normal Close): Relay output terminal.
  7. ANT (Antenna): Connection point for the external antenna.

5. Specifications

Feature Specification
Item Type Gate Opener
Model RTU5024 4G
Material Metal
Rated Voltage DC 9V~36V/1A
Working Temperature -10℃ ~ +60℃
Storage Temperature -20℃ ~ +60℃
Relative Humidity 10-90%, No condensation
SIM Card Slot Standard SIM Card, 3V
Antenna 50Ω SMA
Communication Protocol GSM PHASE 2/2+ (includes data service)
Output Relay Voltage 3A/240V AC
Dimensions 96.5*50*31.5mm
Net Weight 88g

Work Frequency Bands:

  • GSM: 850/900/1800/1900MHz
  • 3G WCDMA: 900/2100 MHz UMTS
  • 3G CDMA2000: 850/1900MHz UMTS
  • 3G: 850/2100MHz UMTS
  • 4G FDD: B1 (2100), B3 (1800), B5 (850), B7 (2600), B8 (900), B20 (800)
  • 4G TDD: B38 (2600), B39 (1900), B40 (2300), B41 (2500/2500)

Note: Some users have reported discrepancies regarding 4G compatibility in certain regions. Please verify local network band support before purchase and installation.

6. Setup and Installation

Follow these steps to install and configure your RTU5024 Gate Opener:

6.1 Important Installation Information

  • Read the entire user manual carefully before installing and setting up the Control Unit.
  • Install the system in a location that is not easily accessible to unauthorized persons and has good GSM signal coverage.
  • Ensure the Control Unit is protected from water and moisture.
  • Always ensure a secure connection to the main power supply.

6.2 Initial Setup

  1. Insert SIM Card: Carefully insert a standard 3V SIM card into the SIM card slot on the RTU5024 unit. Ensure it is correctly oriented.
  2. Attach Antenna: Screw the provided 50Ω SMA antenna onto the ANT connector on the unit.
  3. Connect Power: Connect a DC 9V-36V/1A power supply to the power port (labeled 'Power DC 9-15V').
  4. Observe Indicators: Once powered, the Signal light and Relay light will illuminate. The Signal light will indicate network status.

6.3 Wiring Diagrams

The RTU5024 can be connected to various gate opener systems. Below are typical wiring examples:

Wiring diagrams for RTU5024 showing connection to an electric lock and a motor

Figure 4: Easy Installation Wiring Examples.

  • For Electric Lock: Connect the electric lock to the Relay Output terminals (NO, COM, NC) as per your lock's requirements. Typically, the NO (Normally Open) and COM (Common) terminals are used for momentary activation.
  • For Motor/Gate Opener: Connect the gate opener's control input to the Relay Output terminals (NO, COM, NC). Consult your gate opener's manual for specific wiring instructions.

Ensure all connections are secure and follow local electrical codes.

7. Operation

The RTU5024 offers convenient remote control functionality:

Features overview: No Call Charge, Remote On/Off Control, Up to 200 Authorized Numbers, GSM850/900/1800/1900MHz

Figure 5: Key Features of the RTU5024.

7.1 Remote Control via Free Call

The primary method of operation is by making a free call from an authorized number to the SIM card number inserted in the RTU5024. The device will recognize the authorized number and activate the relay without answering the call, thus incurring no call charges.

  • Authorized Numbers: The device supports up to 200 authorized numbers. These numbers must be programmed into the device using SMS commands (refer to the full PDF manual for detailed SMS command instructions).
  • Remote Switching ON/OFF: A call from an authorized number will trigger the relay, opening or closing the gate/door. The relay action can be configured for momentary or latched operation.
  • Timed Operation: The device can be configured to operate at specified times, allowing for automated access control.

7.2 SMS Confirmation (Optional)

If enabled, the unit can return an SMS confirmation to the first user number when the relay action (Open or Close) occurs. This feature is useful for remote monitoring of the gate's status. This can be enabled or disabled via SMS commands.

8. User Tips

  • SIM Card Type: Ensure you use a standard SIM card (3V) as specified. Confirm the type of chip required for your region's network.
  • Power Adapter: The device does not typically come with a power adapter. It is recommended to purchase a compatible DC 9V-36V/1A adapter separately to ensure proper functionality.
  • Network Compatibility: Before purchasing, verify that the device's supported frequency bands (GSM, 3G, 4G FDD/TDD) are compatible with your local mobile network provider.
  • Programming: Programming the device, especially adding authorized numbers and configuring relay actions, is done via SMS commands. Refer to the detailed PDF manual for specific command syntax.
  • Call and Text Functionality: With a properly configured SIM card, the device supports both calls (for triggering) and texts (for programming and status updates).

9. Troubleshooting

If you encounter issues with your RTU5024, consider the following:

Problem Possible Cause / Solution
Device not responding to calls.
  • Ensure the SIM card is active and has credit (if prepaid).
  • Verify the calling number is an authorized number programmed into the device.
  • Check for sufficient GSM signal strength (observe signal light).
  • Confirm correct power supply connection.
4G functionality not working.
  • The device's 4G bands may not be supported by your local network provider. Refer to specifications and local network information.
  • Some versions of the manual or product may incorrectly state 4G support when only 2G/3G is available.
Difficulty programming the device.
  • Ensure SMS commands are sent in the exact format specified in the full user manual.
  • Verify the SIM card can send and receive SMS messages.
Device not powering on.
  • Check the power adapter and ensure it provides DC 9V-36V/1A.
  • Verify the power connection to the unit is secure.

Frequently Asked Questions (FAQ)

  • Does it work in [Specific Country]? Compatibility depends on local network bands. Please check the 'Work Frequency Bands' in the Specifications section against your country's mobile network providers.
  • Does it support VoLTE? This device primarily uses GSM/3G/4G for signaling and relay control via calls/SMS. VoLTE (Voice over LTE) is typically for voice calls over 4G networks, and while the device uses 4G data bands, its core function does not rely on VoLTE for relay activation.

10. Maintenance

To ensure the longevity and optimal performance of your RTU5024 Gate Opener:

  • Cleaning: Periodically wipe the unit with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Connections: Regularly check all wiring connections to ensure they are secure and free from corrosion.
  • Environment: Ensure the device remains in a dry, protected environment, away from direct sunlight, extreme temperatures, and moisture.
  • Firmware Updates: Check the manufacturer's website for any available firmware updates, though these are less common for this type of device.

11. Warranty and Support

For warranty information, technical support, or further assistance, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download, which includes comprehensive programming instructions and advanced features:

View Full User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.