YQCHEZI S1

Contents

YQCHEZI S1 Solar Street Light User Manual

Models: 7000LM, 50000LM, 200000LM

1. Introduction

Thank you for choosing the YQCHEZI S1 Solar Street Light. This commercial-grade LED outdoor light is designed for efficient and reliable illumination from dusk to dawn, ideal for street lighting, road areas, backyards, and security lighting. Featuring a waterproof design and human body motion sensing, it offers versatile lighting modes and easy installation.

Overview of the solar street light, showing its size, included remote control, and details of the control panel with human body motion sensing and charging indicator light.

Overview of the solar street light, showing its size, included remote control, and details of the control panel with human body motion sensing and charging indicator light.

2. Package Contents

Please check the package for the following items:

  • Solar Street Light Unit (with integrated solar panel)
  • Mounting Support Arm / Pole
  • Metal Bracket for installation
  • Remote Control
  • Screws and Fasteners for assembly
  • Instruction Manual (this document)
Image showing the remote control instructions and small parts like screws, indicating what's included in the package.

Remote control instructions and small parts like screws, indicating typical package contents.

3. Specifications

Feature Detail
Model ID S1
Brightness Options 7000LM, 50000LM, 200000LM
Output Voltage 3.2V
Protection Level IP65 (Waterproof)
Battery Capacity 6000mAh
Battery Type Lithium ion battery 26650
Power Source Solar
Light Source LED bulbs
Dimmable Yes
Body Material ABS
Solar Panel Type Silicon Solar Panels
Charging Time 6-8 hours (full sunlight)
Working Time 12+ hours (after full charge)
Light Unit Dimensions (approx.) 26.5cm (Length) x 14.5cm (Width)
Solar Panel Dimensions (approx.) 45.5cm (Length)
Pole Length (approx.) 41cm
Diagram showing silicon solar panels charging a 5000mAh battery, with charging time (6-8H) and working time (12H+) indicated.

Diagram illustrating solar panel charging and battery working times.

Detailed view of the solar street light components, including the light unit, solar panel, and mounting pole, with dimensions.

Detailed view of the solar street light components and approximate dimensions.

4. Safety Warnings

  • Do NOT disassemble or replace the lamp battery without authorization.
  • Do NOT put batteries into fire or high-temperature environments.
  • Waste electrical products should be disposed of responsibly. Please recycle where facilities exist.

5. Installation Instructions

The YQCHEZI S1 Solar Street Light offers two primary mounting options: Wall Mounted and Pole Mounted.

Diagram illustrating two mounting options: Wall Mounted and Pole Mounted, with a detail of the pole adapter.

Diagram illustrating Wall Mounted and Pole Mounted installation options.

Installation Steps:

  1. Connect the lamp unit with the support arm.
  2. Pass the lamp wire through the support arm hole.
  3. Fix the battery board (solar panel) to the bracket using screw 1.
  4. Fix the assembled bracket to the support arm using screw 2.
  5. Mount the entire assembly to your desired location (wall or pole) using appropriate fasteners. Ensure the mounting surface is sturdy.

Important Precautions Before Installation:

  • Due to potential power loss during long-distance transportation, the lamps may not turn on immediately due to insufficient power. After receiving, connect the lamps correctly and place them under direct sunlight to fully charge for 6-8 hours.
  • Before final installation, test the lamp in an external area with sufficient lighting. Confirm the indicator light is on, checking the connection line to ensure normal charging.
  • The orientation and tilt angle of the solar panel can be adjusted. Ensure the solar panel is installed in a sunny area for optimal charging.
Examples of the solar street light installed in various outdoor settings, including a garage, backyard, and pool area.

Examples of the solar street light installed in various outdoor settings.

6. Operating Instructions

The YQCHEZI S1 Solar Street Light is designed for automatic operation but also offers remote control functionality for customized settings.

Automatic Operation:

After installation and initial charge, the lamp will operate automatically. It will light up at dusk and turn off at dawn, requiring no manual intervention.

Remote Control Functions:

  • Manual On/Off: Use the remote control to turn the light on or off at any time.
  • Timer Function: After the lamp automatically turns on at night, use the remote control to set a timer for 3 hours (3H), 5 hours (5H), or 8 hours (8H). The light will automatically turn off after the set duration.
  • AUTO Mode: To keep the lamp on all night, press the 'AUTO' button on the remote. The timer function has a memory, so you don't need to reset it daily.
  • Brightness Adjustment: Change the brightness from 25% to 100%.
  • Radar Mode: In this mode, the light stays on at 25% brightness and automatically switches to 100% brightness when motion is detected.
  • Timing Mode: You can set the light to stay on steadily for 2, 3, or 4 hours, after which it will switch to Radar Mode.
Illustrations of operating modes: Brightness Adjustable (25%-100%), Radar Mode (25% to 100% on motion), and Timing Mode (Steady on for 2/3/4H, then Radar mode).

Illustrations of Brightness Adjustment, Radar Mode, and Timing Mode.

Comparison of the new 240° wide-angle design versus an older 90° design, highlighting wider lighting range.

Comparison of the 240° wide-angle design for wider lighting range.

7. Maintenance

  • It is recommended to clean the dust on the solar panel every 5 months to ensure optimal charging efficiency. Use a soft, damp cloth to gently wipe the surface.
  • Periodically check all mounting screws and connections to ensure they remain secure.

8. Troubleshooting

  • Light not turning on:
    • Ensure the lamp has received an initial full charge (6-8 hours of direct sunlight).
    • Check all wiring connections between the lamp and the solar panel/support arm.
    • Verify that the charging indicator light is on when exposed to sunlight, indicating proper charging.
  • Remote control not working:
    • Ensure the remote control was included in your package.
    • Check if batteries are correctly inserted into the remote control.
    • Ensure there are no obstructions between the remote and the light's sensor.
  • Light output is dim or short-lived:
    • Ensure the solar panel is clean and free from dust or debris.
    • Verify the solar panel's position and tilt angle to maximize direct sunlight exposure throughout the day.
    • Consider environmental factors like heavy cloud cover or short winter days which can reduce charging efficiency.

9. User Tips

  • Initial Charge is Crucial: Always perform an initial full charge under direct sunlight for 6-8 hours before the first use to ensure optimal performance.
  • Verify Package Contents: Upon arrival, carefully check that all components, including the remote control and mounting hardware, are present and undamaged.
  • Confirm Dimensions: Before purchasing and installing, compare the product dimensions provided in the specifications with your intended installation area to ensure it meets your expectations.
  • Optimal Solar Panel Placement: Position the solar panel in a location that receives maximum direct sunlight throughout the day, free from shadows from buildings or trees.
  • Regular Cleaning: Regularly clean the solar panel to prevent dust and dirt buildup, which can significantly reduce charging efficiency.

10. Warranty & Support

This YQCHEZI S1 Solar Street Light comes with a 2-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

For additional information and detailed guides, you may refer to the official user manual PDF available at: YQCHEZI S1 User Manual (PDF).

© 2024 YQCHEZI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.