AVATTO WPM20

Contents

AVATTO WPM20 Smart WiFi 6 Energy Meter Module User Manual

Model: WPM20 | Brand: AVATTO

Introduction

The AVATTO WPM20 Smart WiFi 6 Energy Meter Module is designed to monitor and manage the energy consumption of your electrical appliances. This module integrates with the Tuya Smart Life app, allowing for remote control, real-time power monitoring, and data export. It also supports voice control through popular smart assistants like Amazon Alexa, Google Home, and Yandex Alice.

This manual provides detailed instructions for the safe installation, setup, operation, and troubleshooting of your WPM20 module.

Safety Information

  • Installation must be carried out by a qualified electrician in accordance with local regulations.
  • Keep the device out of reach of children.
  • Keep the device away from water or hot environments.
  • Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, leading to abnormal operation.
  • Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
  • Do NOT attempt to disassemble, repair, or modify the device.
  • Always turn off the main power supply before carrying out any electrical work.

Setup

Package Contents

Please ensure all components are present:

  • AVATTO WPM20 Smart WiFi 6 Energy Meter Module
  • User Manual (this document, or refer to the PDF for more details)

Installation Method

The WPM20 module is designed for installation within an electrical meter box or embedded into a standard wall junction box.

Installation methods for the AVATTO WPM20 module, showing placement inside an electrical meter box and a wall junction box.
Figure 1: Installation examples in an electrical meter box and a wall junction box.

Wiring Diagram

Follow these steps carefully for wiring the module:

  1. Turn off the main power supply before proceeding.
  2. Connect the wires to the module terminals (O, O, L, N) as shown in the diagram below.
  3. Insert the module into the chosen junction box or meter box.
  4. Restore power supply and proceed with app connection.
Top-down view of the AVATTO WPM20 module showing terminal labels O, O, L, N for wiring connections. Input: AC 110-240V 50/60Hz, Output: Max 16A/3840W @240V AC.
Figure 2: Wiring terminals on the WPM20 module.

A more detailed wiring diagram can be found in the official user manual PDF: AVATTO WPM20 User Manual (PDF).

App Installation and Device Pairing

  1. **Download the App**: Scan the QR code provided in the PDF manual or search for "Smart Life App" in your device's App Store (iOS) or Google Play Store (Android).
  2. **Register/Log In**: Open the Smart Life app. Log in or register a new account using your mobile number or email address. Follow the prompts to enter a verification code and set your login password. Create a "Family" if prompted.
  3. **Enter Pairing Mode**:
    • After wiring the module, press the reset key on the module for approximately 10 seconds.
    • Alternatively, turn the traditional wall switch connected to the module ON and OFF 5 times consecutively.
    • The indicator light inside the module should begin flashing quickly, indicating it is in pairing mode.
  4. **Add Device in App**:
    • Ensure your mobile device's Bluetooth is enabled for multi-protocol matching (WiFi/Bluetooth).
    • In the Smart Life app, follow the on-screen instructions to add a new device. The app should detect the module automatically if Bluetooth is on.
    • Confirm your 2.4GHz Wi-Fi network and enter the password. (Note: The module only supports 2.4GHz Wi-Fi).
    • The connection process may take 10-100 seconds depending on your network conditions.
  5. Once successfully connected, the device will appear in your Smart Life app, and you can begin controlling it.

Operating Instructions

Remote Control via App

After successful pairing, you can control the connected appliance from anywhere using the Smart Life app on your mobile phone. This includes turning it on/off and setting schedules.

Power Monitoring and Data Export

The WPM20 module provides real-time power consumption data. You can view detailed "Power Statistics" within the Smart Life app, including current power (W), current (mA), and current voltage (V). The app displays usage in kWh over daily, monthly, and yearly periods.

Smartphone app displaying 'Power Statistics' with usage in kWh, showing a graph of energy consumption over time. A living room with a TV and fan is in the background.
Figure 3: Real-time power consumption monitoring in the Smart Life app.

The app also allows you to export power data to your email with a single click, enabling detailed analysis of your energy usage.

Smartphone app displaying 'Power Statistics' with a graph, illustrating how the module helps optimize photovoltaic power generation. Solar panels and a home energy storage system are visible.
Figure 4: Monitoring energy production and consumption, useful for photovoltaic systems.

Battery Reminder Settings

You can set daily or weekly power consumption thresholds within the Smart Life app. Once the power consumption reaches the set threshold, a reminder will be issued to your smartphone.

Smartphone app screen showing 'Usage reminder settings' where a user can input a daily power consumption (kWh) range for reminders.
Figure 5: Setting power consumption reminders in the app.

Voice Control Integration

The WPM20 module supports voice control through various smart home platforms:

  • Amazon Alexa
  • Google Home
  • Yandex Alice

To enable voice control, link your Smart Life account within the respective smart assistant's app (e.g., Alexa app, Google Home app). Once linked, you can use voice commands to control the connected appliance (e.g., "Alexa, turn off the living room fan").

Maintenance

The AVATTO WPM20 module requires minimal maintenance. To ensure optimal performance and longevity:

  • Keep the device clean and free from dust.
  • Avoid exposing the device to extreme temperatures or humidity.
  • Do not use harsh chemicals or abrasive cleaners on the device.
  • Ensure the electrical connections remain secure. If you suspect any issues, consult a qualified electrician.

Troubleshooting

Common Issues and Solutions

Q: Why can't I configure the switch module?
  • Check if the device is powered on.
  • Ensure your mobile device and the switch module are connected to the same 2.4GHz Wi-Fi network.
  • Verify that your internet connection is stable and strong.
  • Double-check that the Wi-Fi password entered in the Smart Life app is correct.
  • Confirm that the wiring connections are correct according to the diagram.
Q: What happens if the Wi-Fi goes off?

If your Wi-Fi network is temporarily unavailable, you can still control the connected appliance manually using the traditional wall switch. The module will automatically reconnect to your Wi-Fi network once it becomes available again.

Q: What should I do to change the Wi-Fi network or change the password?

If you change your Wi-Fi network or password, you will need to re-pair the device with the Smart Life app. Follow the "App Installation and Device Pairing" steps in the Setup section to connect the module to the new Wi-Fi network.

Q: How do I reset the device?

To reset the device, power it off and on 5 times consecutively. The indicator light will flash, indicating it has been reset and is ready for re-pairing.

Specifications

Feature Specification
Product Type Smart WiFi6 Energy Monitor
Input AC 110-240V 50/60Hz
Output Max 16A/3840W @240V AC
Linking Method Wifi
WiFi Protocol WiFi 6
Operation Range <100m
Dimensions (W*D*H) 34*29*17 mm
IP Rating IP20
Certificates CE, RoHS
Smart Home Platform Tuya (Smart Life App)
Voice Control Support Alexa, Google Home, Yandex Alice
Dimension reference and product specifications table for the AVATTO WPM20 module. Dimensions: 34mm width, 29mm height, 17mm depth. Table lists Product type, Input, Output, WiFi Signal replication, WiFi Protocol, Operation range, Dims (W*D*H), IP rating, and Certificates.
Figure 6: Physical dimensions and key specifications.

User Tips

  • **Enabling Energy Monitoring**: After successful pairing, the energy monitoring feature should be active by default. To view consumption data, open the Smart Life app, select your WPM20 module, and look for a section labeled "Power Statistics" or similar. If data is not appearing, ensure the module is correctly wired and the connected appliance is drawing power.
  • **2.4GHz Wi-Fi Only**: Remember that the module only supports 2.4GHz Wi-Fi networks. If you have a dual-band router, ensure your phone is connected to the 2.4GHz band during the pairing process.
  • **Signal Strength**: For reliable operation, install the module in an area with good Wi-Fi signal strength. Avoid placing it behind large metal objects or thick concrete walls.

Warranty and Support

For detailed warranty information and further technical support, please refer to the official product documentation or contact AVATTO customer service.

A comprehensive user manual in PDF format is available for download: AVATTO WPM20 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.