1. General Safety Warnings
Read and understand all instructions in this manual before using the product. Keep these instructions for future reference and pass them on to any subsequent user.
This product is intended for household use only. Use it only as described in this manual. Do not use the product if it is damaged in any way.
This product is intended for use by persons aged 18 years and above. It may be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge only if they have been given supervision or instruction and understand the hazards involved.
2. Product Overview
The Tuya ZigBee Door Sensor is a smart device designed to detect the open/closed status of doors and windows. It operates wirelessly using ZigBee 3.0 protocol and connects to your smart home system via a ZigBee gateway. The sensor features both USB power supply for long-term operation and a backup battery for uninterrupted functionality.
3. Setup Instructions
3.1. Components
The package typically includes:
- Main Sensor Unit
- Magnetic Strip (Deputy Body)
- USB Power Cable
- CR123A 3V Battery (pre-installed or included)
- User Manual (this document)
3.2. Powering the Sensor
The sensor can be powered via USB or its internal battery.
- USB Power Supply: Connect the provided USB cable to the sensor and a 5V/1A USB power adapter (not included). This provides long-term power and eliminates concerns about battery life.
- Backup Battery: The sensor uses a CR123A 3V battery. This battery acts as a backup in case of power outages when using USB power, or as the primary power source for wireless operation.
3.3. Connecting to a ZigBee Gateway
Important: This device requires a ZigBee gateway to function with the Tuya APP and your smart home system. Ensure your ZigBee gateway is powered on and connected to your home network.
- Open the Tuya Smart or Smart Life APP on your smartphone.
- Ensure your ZigBee gateway is already added to the APP.
- Follow the APP's instructions to add a new sub-device (sensor) to your ZigBee gateway. This usually involves putting the gateway into pairing mode and then activating the sensor (e.g., pressing a reset button or opening/closing it).
- Once successfully paired, the sensor will appear in your APP.
3.4. Installation
Install the main sensor unit and the magnetic strip on your door or window frame. Ensure they are aligned and close enough to each other (typically within 1-2 cm) when the door/window is closed.
- Clean the surface where you intend to mount the sensor.
- Use the adhesive backing (if provided) or screws to securely attach the main sensor unit to the fixed part of the door/window frame.
- Attach the magnetic strip to the moving part of the door/window, aligning it with the main sensor unit.
- Test the installation by opening and closing the door/window to ensure the sensor detects the change in status.
4. Operating Instructions
4.1. Door/Window Status Detection
When the door or window is opened, separating the main sensor unit from the magnetic strip, the device will trigger and send a push notification to your phone via the Tuya APP. When the door or window is closed, the sensor will detect this change and update its status in the APP.
4.2. APP Remote Control and Notifications
Through the Tuya Smart or Smart Life APP, you can:
- View the current open/closed status of your doors/windows from anywhere.
- Receive instant push notifications on your smartphone when a door/window is opened or closed.
- Set up automation rules (e.g., turn on lights when a door opens, trigger an alarm when a window opens at night).
4.3. Anti-Dismantle Function
The sensor is equipped with an anti-dismantle function. If the main sensor unit is forcibly removed from its installed position (e.g., by tampering), it will trigger an alarm notification to your smartphone, enhancing security.
5. Maintenance
- Cleaning: Wipe the sensor and magnet surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the battery level is low, the APP will typically notify you. To replace the CR123A 3V battery, carefully open the main sensor unit, remove the old battery, and insert a new one with the correct polarity.
- USB Power Check: If using USB power, periodically check that the cable is securely connected and the power adapter is functioning correctly.
- Firmware Updates: Check the Tuya APP regularly for any available firmware updates for your sensor and gateway to ensure optimal performance and security.
6. Troubleshooting
6.1. Sensor Not Connecting to ZigBee Gateway
- Ensure the ZigBee gateway is powered on and connected to your home network.
- Verify the sensor is within the wireless range of the gateway (up to 40M).
- Put the gateway into pairing mode again and attempt to re-add the sensor.
- Check the sensor's battery level or USB power connection.
- Try resetting the sensor (refer to the specific reset procedure in the full PDF manual if available).
6.2. No Notifications Received
- Check your smartphone's notification settings for the Tuya Smart/Smart Life APP.
- Ensure the sensor is properly connected to the gateway and its status is updating in the APP.
- Verify your phone has an active internet connection.
- Check if any automation rules or notification schedules in the APP are preventing notifications.
6.3. False Anti-Dismantle Alarms
- Ensure the sensor is securely mounted and not loose.
- Avoid installing the sensor in locations prone to vibrations or accidental bumps.
6.4. Power Issues
- If using USB power, check the cable and adapter.
- If using battery, replace the CR123A 3V battery.
7. Specifications
| Feature | Detail |
|---|---|
| Battery | CR123A 3V |
| USB Power Supply | 5V/1A |
| Standby current | 10.7uA |
| Detection temperature | -10°C ~ 80°C |
| Detection humidity | 0% ~ 100% |
| Wireless frequency | 2.4GHz |
| Communication protocol | Zigbee 3.0 |
| Wireless standard | IEEE 802.11 b/g/n |
| Wireless range | 40M |
| Main body size | 82mm x 27mm x 23mm |
| Deputy body size | 50mm x 13mm x 16mm |
| Certification | CE |
| Smart home platform | Tuya |
8. User Tips
- Optimal Placement: For best performance, ensure the sensor and magnet are installed on a clean, flat surface and are closely aligned when the door/window is closed.
- ZigBee Network Health: Regularly check the health and signal strength of your ZigBee network within the Tuya APP to ensure reliable communication with the sensor.
- Battery Monitoring: Even with USB power, keep an eye on the backup battery status in the APP to ensure continuous operation during power outages.
- Automation: Explore the automation features in the Tuya APP to integrate the door sensor with other smart devices for enhanced security and convenience.
9. Frequently Asked Questions (FAQ)
9.1. What is a ZigBee gateway and why do I need it?
A ZigBee gateway (also known as a hub) is a central device that connects ZigBee-enabled devices, like this door sensor, to your home Wi-Fi network and the internet. It translates ZigBee signals into a language your router and smartphone app can understand, allowing you to control and monitor your smart devices remotely. Without a ZigBee gateway, the door sensor cannot communicate with the Tuya APP.
9.2. How do I reset the sensor?
Typically, there is a small reset button on the sensor. Use a pin or a thin object to press and hold the reset button for 5-10 seconds until an indicator light flashes, signaling it's in pairing mode or has been reset. Refer to the full PDF manual for precise instructions if needed.
9.3. What if the sensor loses connection?
First, check the sensor's power source (USB or battery). Then, ensure your ZigBee gateway is online and functioning. If the issue persists, try moving the sensor closer to the gateway or restarting the gateway. You may need to re-pair the sensor with the gateway if the connection is not restored.
10. Manufacturer Information
Product Name: Safety protective equipment
Manufacturer: Guangzhou Aicai Technology Co., Ltd.
Address: Room 709, No. 68, Gangwan RoadHuangpu District, Guangzhou
EC REP (European Community Representative):
- VALHALLA TAXE
- RUE GENERAL DE REFFYE EGD, 88000 EPINAL
- 913 439 188 R.C.S. Epinal
- TEL: +33-0629986194
- Mail: valhallatax@outlook.com
Certifications: CE, FC, RoHS
Origin: Made In China
For more detailed information, please refer to the official user manual PDF: View User Manual (PDF)