1. Introduction
Thank you for purchasing the GuliKit NS09 T Wireless Bluetooth Gamepad. This controller is designed to provide a versatile and immersive gaming experience across multiple platforms, including Nintendo Switch and PC. It features dual motor vibration, a gyroscope, and a long-lasting rechargeable battery. Please read this manual carefully before use to ensure proper operation and to maximize your gaming enjoyment.
2. Safety Information
CAUTION!
This product contains small parts such as buttons, joystick caps, and screws that may cause suffocation if swallowed by children. Keep out of reach of small children.
3. Product Overview
The GuliKit NS09 T gamepad features an ergonomic design for comfortable gameplay and includes essential components for a full gaming experience.
Figure 1: GuliKit NS09 T Gamepad Packaging
Figure 2: GuliKit NS09 T Gamepad with labeled components (NS09 T diagram)
Key Components:
- USB-C Port: Used for charging and wired connection.
- Controller Mode LED: Indicates the current operating mode.
- Player Number LED: Shows the assigned player number.
- Mode Button: Double-click to change mode. Long press for power off, short press for power on.
- SYNC Button: Long press for 2 seconds to start scrolling LEDs for pairing.
- Dual Motor Vibration: Provides haptic feedback for an immersive experience, especially in racing and shooting games.
- Gyro Axis: Supports motion control in compatible games.
4. Setup and Connection
4.1 Charging the Gamepad
The controller comes with a built-in 1000 mAh rechargeable battery.
- Connect the gamepad to a power source using the provided USB-C cable.
- Charging time is approximately 2-3 hours.
- A full charge provides 8-10 hours of working time and up to 720 hours of standby time.
Figure 3: Battery Life and Charging Details
4.2 Power On/Off
- Power On: Short press the Mode Button.
- Power Off: Long press the Mode Button.
4.3 Pairing with Devices
The GuliKit NS09 T gamepad is compatible with Nintendo Switch and PC via Bluetooth.
Figure 4: Device Compatibility and Features
- Ensure the gamepad is charged.
- Long press the SYNC Button for 2 seconds. The Player Number LEDs will start scrolling, indicating it's in pairing mode.
- On your device (Nintendo Switch or PC), navigate to the Bluetooth settings and select the GuliKit NS09 T controller from the list of available devices.
- Once connected, the Player Number LED will stop scrolling and remain lit, indicating a successful connection.
For specific pairing instructions for your Nintendo Switch or PC, please refer to your device's user manual.
5. Operating Instructions
5.1 Changing Controller Mode
Double-click the Mode Button to cycle through different controller modes if available. The Controller Mode LED will indicate the current mode.
5.2 Dual Motor Vibration
The gamepad features dual motors for strong vibration feedback, enhancing the realism in games, particularly racing and shooting titles.
Figure 5: Dual Motor Vibration Feature
5.3 Gyroscope Functionality
The built-in gyroscope allows for motion control in games that support this feature. Ensure the gyroscope is calibrated for optimal performance.
6. Calibration
6.1 Calibration on Joysticks, ZL & ZR Triggers
- With the controller powered on, simultaneously press and hold the 'L', 'R', Left D-Pad, and 'A' buttons for 6 seconds.
- The controller will vibrate once, indicating it has entered calibration mode.
- During calibration, rotate both the left and right joysticks fully 2-3 times.
- After calibrating both joysticks, the controller will vibrate once more, automatically exiting calibration mode.
6.2 Calibration on Gyroscope
- In the power-on state, place the controller on a flat surface.
- Simultaneously press the '+', '-', D-pad Left, and 'A' buttons. This will initiate an automatic calibration of the gyroscope.
- Once the calibration is complete, the controller will vibrate once as a notification.
*When the gyroscope is functioning normally, there is no need for calibration.
7. Maintenance
- Clean the controller regularly with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
- Store the controller in a safe place when not in use to prevent damage.
- Do not attempt to disassemble the controller, as this may void the warranty and cause damage.
8. Troubleshooting
8.1 Controller Not Powering On
- Ensure the battery is charged. Connect the controller to a power source using the USB-C cable.
- Perform a short press on the Mode Button to power on.
8.2 Unable to Pair
- Ensure the controller is in pairing mode (Player Number LEDs scrolling) by long-pressing the SYNC button for 2 seconds.
- Check your device's Bluetooth settings to ensure it's discoverable and scanning for new devices.
- Try restarting both the controller and your device.
- Ensure the controller is within the effective Bluetooth range.
8.3 Joystick Drift or Inaccurate Gyroscope
- Perform the joystick and trigger calibration as described in Section 6.1.
- Perform the gyroscope calibration as described in Section 6.2.
8.4 No Vibration Feedback
- Check in-game settings to ensure vibration is enabled.
- Ensure the game supports vibration feedback.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | NS09 T |
| Type | Gamepads |
| Connectivity | Wireless Bluetooth, USB-C Wired |
| Compatible Brand/Model | SEGA, Nintendo Switch, PC |
| Compatible Sega Model | Mega Genesis |
| Battery Included | Yes |
| Battery Capacity | 1000 mAh (Rechargeable) |
| Charging Time | 2-3 Hours |
| Working Time | 8-10 Hours |
| Standby Time | 720 Hours |
| Vibration | Dual Motor Vibration |
| Motion Control | Gyro Axis |
| Package Dimensions (L x W x H) | 16 cm x 15 cm x 6 cm |
| Package Weight | 0.4 kg |
| Origin | Mainland China |
10. User Tips
Based on general user feedback for similar devices, consider the following tips:
- Always fully charge the controller before its first use to optimize battery life.
- If experiencing input lag, try connecting the controller via USB-C cable for a wired connection.
- Keep the controller's firmware updated if updates become available from the manufacturer.
11. Warranty and Support
For detailed warranty information and customer support, please refer to the official GuliKit website or contact your retailer. A comprehensive user manual in PDF format may also be available for download: