IKSLED PIR 1626 sensor

Contents

IKSLED PIR Motion Sensor Light Control Switch Module User Manual

Model: PIR 1626 sensor | Brand: IKSLED

1. Product Overview

This product is an intelligent motion sensor switch module integrating Passive Infrared (PIR) motion detection and photoresistor-based light sensing. It automatically detects human movement and controls load on/off based on ambient light levels. It is widely used in smart lighting, security sensing, automatic door control, and other scenarios.

For a detailed guide, you may refer to the official user manual PDF: PIR & Daylight Sensor Product Manual (PDF).

2. Key Features

  • Motion Detection: Triggers load operation when human movement is detected within range.
  • Light Sensing: Recognizes ambient brightness, supporting two working modes: "night-only" (Version A) or "24/7" (Version B).
  • Delay Control: Keeps the load active while motion is detected; automatically turns off after 30 seconds of no movement.

3. Specifications

ParameterSpecification
Product NamePIR & Daylight Sensor
Model NumberPIR 1626 sensor
Brand NameIKSLED
Operating VoltageDC 3.7V / 5V / 12V / 24V (wide voltage compatibility)
Max. Load Current3A
PowerMax. 36W
Sensing Distance0-6 meters
Sensing Angle120°
Time Delay30 seconds (triggers after no movement is detected)
Light Sensing Threshold10 LUX (Version A only triggers below this brightness)
MaterialPlastic
Product Dimensions26mm × 16mm × 12.8mm (L × W × H)
CertificationVDE, RoHS, LVD, FCC, CE

Product Dimensions and Specifications
Image: Product dimensions and key specifications. The sensor measures 26mm in length, 16mm in width, and 12.8mm in height. It operates on 3.7V, 5V, 12V, or 24V DC, with a maximum current of 3A. Sensing distance is 0-6 meters, and the sensing angle is 120 degrees. The light stays on while motion is detected and turns off after 30 seconds of no movement.

4. Setup (Installation)

Core Components:

  • PIR Lens: Captures human infrared signals for motion detection.
  • Photoresistor: Detects ambient light intensity to control sensing conditions.
  • PCB Board & Pins:
    • +: Positive power input
    • -: Negative power input
    • LED+: Positive load output
    • LED-: Negative load output

Wiring Diagram for PIR Sensor
Image: Wiring diagram showing the connection points: V+ (Positive Power), V- (Negative Power), LED+ (Positive Load Output), and LED- (Negative Load Output).

Installation Steps:

  1. Mount the Module: Select a suitable location (recommended height: 1.5-2 meters), ensuring the PIR lens faces the detection area without obstruction.
  2. Wiring: Connect the power supply and load strictly per the interface instructions, paying close attention to polarity to avoid reverse connection. Incorrect wiring can damage the module.

5. Operating Instructions

Power-On Test:

Apply power to the module; it enters standby mode.

Version Differences:

Version A vs Version B Comparison
Image: Comparison of Version A and Version B. Version A detects motion only at night, not during the day, utilizing a photoresistor. Version B detects motion all day long (24/7).

  • Version A (Night-Only): Triggers the load only when ambient brightness is below 10 LUX and human movement is detected. This version is suitable for staircase lights, courtyard lights, and other fixtures that only need to operate at night.
  • Version B (24/7): Triggers the load whenever human movement is detected, regardless of ambient light level. This version is ideal for closet lights, corridor lights, and other fixtures requiring round-the-clock sensing.

Version A: Detects motion only at night
Image: Close-up of Version A sensor, which activates only when it's dark and motion is detected.

Version B: Detects motion all day long
Image: Close-up of Version B sensor, which activates whenever motion is detected, regardless of ambient light.

Function Verification:

Move within the sensing range; the load should activate immediately. After 30 seconds of no movement, the load will automatically turn off.


Video: Demonstration of the motion sensor light control in various applications, including under-cabinet lighting and closet lighting. The lights automatically turn on when motion is detected and turn off after a delay.

Detection Angle and Range Diagram
Image: Diagram illustrating the detection angle and range. The sensor has a 120° sensing angle and a detection distance of up to 6 meters. The range is wider but the distance is shorter closer to the sensor (e.g., 20cm), extending up to 6m at the center of the field.

6. Maintenance

Precautions:

  • Avoid installing the module in areas with direct strong light, high temperatures, high humidity, or strong electromagnetic interference.
  • Sensing distance may vary due to ambient temperature, clothing, and other factors; adjust the mounting position as needed for optimal performance.
  • Do not exceed the module's maximum load capacity (3A) to prevent damage.
  • Keep the PIR lens clean and free from obstructions to ensure optimal performance.

7. Troubleshooting

SymptomPossible CausesSolutions
No sensing, load does not activate1. Incorrect wiring/unsuitable voltage
2. Version A is used and ambient brightness > 10 LUX
3. No movement in the sensing range
1. Check power polarity and voltage rating
2. Switch to Version B or test in a dark environment
3. Ensure movement occurs within the sensing range
Load does not auto-off after sensing1. Continuous movement interference
2. Module delay function malfunction
1. Remove moving objects from the sensing area
2. Reboot the module or inspect for hardware faults
Shortened sensing distance1. Obstructed/dirty PIR lens
2. Excessively high ambient temperature
1. Clean the lens and ensure no obstructions
2. Relocate the module to a cooler area

8. User Tips

  • Optimal Placement: For best results, mount the sensor where it has a clear line of sight to the intended detection area, avoiding direct sunlight or heat sources that could cause false triggers.
  • Power Supply: Always ensure your power supply matches the module's voltage requirements (3.7V, 5V, 12V, or 24V DC) and that polarity is correct during wiring.
  • Testing: After installation, perform a quick test by moving into the detection zone to confirm the light activates and deactivates as expected.

9. Warranty & Support

  • This is a low-voltage DC module; never connect to AC mains to avoid electric shock.
  • Do not disassemble or modify the module, as this will void the warranty.
  • Under normal use, the product is covered by a 12-month warranty (excludes man-made damage).

10. Application Scenarios

  • Smart Lighting: Automatic control of staircase lights, corridor lights, closet lights, and courtyard lights.
  • Security Sensing: Human intrusion detection and automatic alarm triggering.
  • Energy-Saving Devices: Automatic start/stop control for fans, displays, and other loads.

PIR & Daylight Sensor Application
Image: The PIR & Daylight Sensor detecting motion, illustrating its function in controlling lights based on both movement and ambient light conditions (night/day cycle).

PIR & Daylight Sensor in action
Image: The PIR & Daylight Sensor detecting human motion, triggering a light source in a dark environment.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.