1. Introduction
Thank you for purchasing the CETANT Modern LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.
2. Safety Information
- Always cut off the power supply or close the main circuit breaker before installation or maintenance.
- Do not place lamps in flammable or humid places.
- Ensure all electrical connections are secure and comply with local electrical codes.
- If you are unsure about any part of the installation, consult a qualified electrician.
3. Package Contents
Please check the parts and accessories of the lamp against the following list:
- Ceiling Light Fixture (main body with LED strips)
- Mounting Plate
- Screws and Nuts for assembly
- Rubber Plugs (for drilling holes)
- Wire Connectors
- LED Driver
- User Manual (this document)
4. Specifications
| Parameter | Value |
|---|---|
| Name | Ceiling Light |
| Model Number | PL230 |
| Working Power | 78W |
| Operating Voltage | 90-260V AC |
| Material | Aluminum, Iron, Silica Gel |
| Light Source | LED bulbs |
| Luminous Flux | 249-2000 Lumens |
| Number of Light Sources | > 20 |
| Lighting Area | 10-15㎡ |
| Features | Square 4 Head Lamp |
| Technics | Perforated |
| Application | Kitchen, Dining Room, Bedroom, Foyer, Study, Bathroom |
| Installation Method | Assembly, Surface mounted |
| Bulbs Included | Yes |
| Smart Device | No |
| Dimmable | Yes |
| Product Color Options | Black, White |
| Emitting Color Options | Cool White, Warm White |
| Package Dimensions (L x W x H) | 32cm x 32cm x 11cm |
| Package Weight | 1.486 kg |
| Certifications | CCC, CE, PSE, ROHS |
Product Details
The lamp features an energy-saving LED light strip and a high-transparency silicone lampshade, ensuring a large and sufficient lighting area. The lamp body is constructed from durable aluminum and iron.

Close-up of the LED strip and silicone lampshade, highlighting the aluminum body.

Product dimensions and specifications table.
5. Installation
Pre-Installation Checklist:
- Ensure all parts and accessories are present.
- Turn off the main power supply at the circuit breaker before starting installation.
- Do not install the lamp in flammable or humid locations.
Installation Procedure:
- Affix the top plate to the two headlights using screws.
- Subsequently, attach the top plate to the two small lights with nuts.
- Verify the position of the pendant and determine the position for punching.
- Drill a hole in the designated area.
- Once drilling is completed, insert the rubber plug into the hole.
- Fasten the pendant to the wall using a screwdriver.
- Connect the live wire, ground wire, and neutral wire to the connector.
- Cut off the power supply, connect the wires, tighten the screws, and fix the lamp to the wall.
For a visual guide, please refer to the installation diagram and video below:

Detailed 8-step installation diagram.
Assembly and wiring demonstration video.
6. Operation
Once installed and wired correctly, restore power to the fixture. The light can be controlled via a standard wall switch. This LED ceiling light is dimmable, allowing you to adjust the brightness to your preference. It also supports switching between Cool White and Warm White light temperatures to suit different moods and activities.
Color Temperature Adjustment:
The light offers two color temperatures: Cool White and Warm White. Typically, these can be cycled by quickly toggling your wall switch OFF and ON. Refer to the product concept image for visual representation:

Visual comparison of warm white and cool white light output.
7. Maintenance
- Cleaning: To clean the fixture, ensure the power is off. Use a soft, dry cloth to wipe down the surfaces. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying with a clean, dry cloth. Avoid abrasive cleaners or solvents.
- Bulb Replacement: The LED bulbs are integrated into the fixture and are not user-replaceable. If the LEDs fail, please contact customer support for assistance.
- Inspection: Periodically check the fixture for any signs of damage or loose connections.
8. Troubleshooting
- Light does not turn on:
- Check if the power supply is connected and the circuit breaker is on.
- Ensure all wiring connections are secure.
- Verify that the wall switch is functioning correctly.
- Light flickers or dims unexpectedly:
- Check for loose wiring connections.
- Ensure the voltage supply is stable and within the specified range (90-260V).
- If using a dimmer switch, ensure it is compatible with LED lighting.
- Incorrect color temperature or dimming not working:
- Ensure the light is properly installed and receiving consistent power.
- For color temperature cycling, try quickly toggling the wall switch OFF and ON.
If problems persist, please contact customer support.
9. User Tips
- Optimal Performance: Ensure the light is securely mounted and all electrical connections are tight for flawless operation.
- Ambiance Control: Experiment with both Cool White and Warm White light settings to find the perfect ambiance for different times of day or activities in your living space.
10. Warranty & Support
This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects and broken components. In case of a broken replacement need, please contact our customer service.
For further assistance or to view the original user manual, you can refer to the PDF document: User Manual (PDF)

Certifications and service guarantee details.