HUANCI Q3

Contents

HUANCI Q3 Off-road Electric Bike User Manual

Model: Q3

Introduction

Thank you for choosing the HUANCI Q3 electric bike. This instruction manual contains important safety information and tips. Please read it carefully before using the electric bike. Do not use the electric bike before you have read and understood this manual. Keep this instruction manual for future reference.

For your safety and the safety of others, please read this manual carefully before using the electric bike to ensure correct and safe operation. Improper use not in accordance with these instructions may cause danger, and the manufacturer will not bear responsibility for personal injury or property loss resulting from such use.

If you have any questions during use, or cannot find the information in this manual, please contact your dealer for assistance.

Product Overview

The HUANCI Q3 is an off-road electric bike designed for adults, featuring a 48V20AH power system and 20-inch fat tires for versatile terrain performance.

HUANCI Q3 Electric Bike, black, with 48V 20A battery and 100-120km assist mode mileage.
HUANCI Q3 Electric Bike, black, with 48V 20A battery and 100-120km assist mode mileage.
Video showcasing the HUANCI Q3 electric bike in off-road conditions, highlighting features like battery, headlights, frame, brakes, motor, gear system, waterproof rating, fat tires, and riding modes.

Setup

1. Packing List

Please check the contents of your package against the list below. If anything is missing, contact your dealer immediately.

  • Electric Bike: 1 unit
  • Seat: 1 unit
  • Pedals: 2 units
  • Wrench: 1 unit
  • Charger: 1 unit
  • User Manual: 1 unit
  • Quick Release: 1 unit

2. Product Assembly

2.1. Open and Fix the Handlebar

  1. Lift the pole and the front of the electric bike. Fasten the folding buckle of the pole.
  2. Turn the fix ring of the folding buckle to fasten the spanner, preventing the folding buckle from opening.
  3. Handlebar Installation: Remove the 4 screws in front of the stem using the provided Allen wrench. Place the handlebar into the stem, fasten the fasteners, and insert the screws to lock it.

Note: After installation, gently shake the handlebar. If it feels loose, adjust the screw as shown in the figure. Do not overtighten the screw, as it may make it difficult or impossible to open the folding buckle wrench later.

2.2. Install Front Wheel

Install the front wheel onto the front fork and secure it by locking the quick release wrench.

2.3. Install Pedals

  1. Left Pedal: Install the pedal marked with 'L' on the left crank. Note that the thread direction for the left pedal is counterclockwise.
  2. Right Pedal: Install the pedal marked with 'R' on the right crank. Note that the thread direction for the right pedal is clockwise.

2.4. Install Battery Pack

  1. Install the Battery: Align and insert the battery terminal side with the frame, then press the battery lock end to secure it.
  2. Remove the Battery: Insert the battery lock key into the lock hole, rotate it clockwise for 90 degrees, and then remove the battery after it pops up.

2.5. Install the Bike Seat

Open the seat tube locking wrench, insert the seat into the tube, adjust the seat height to your preference, and then tighten the wrench.

Note: Pay attention to the safety line when adjusting the height of the seat. Do not exceed the safety line on the saddle tube to prevent damage or danger.

2.6. Front and Rear Fender Installation

  1. Front Fender: Install the front fender bracket to the front fender and secure it with the attached screws. Then, install the front fender onto the front fork and secure it with the attached screws.
  2. Rear Fender: Install the rear fender bracket to the rear fender and secure it with the attached screws. Then, install the rear fender onto the frame and secure it with the attached screws.

2.7. Shelf Installation

Install the rear shelf onto the back of the bike, aligning it with the screw holes, and secure it with the equipped screws.

Operating Instructions

1. How to Ride

  1. Safety First: Always wear a helmet, knee pads, elbow pads, and other protective gear to minimize the risk of injury.
  2. Adjust Seat Height: Adjust the seat to a comfortable height. The most suitable height is when your knee angle is approximately 25 to 35 degrees when your foot is at the lowest point of the pedal stroke.
  3. Start Up: Press and hold the power button to start the bike and check the battery power level on the display.
  4. Mounting: Hold the brake tightly, straddle the bike with your right foot, step on a pedal, and sit down.
  5. Starting Movement: Slowly release the brake and lightly press your left foot on the ground to make the bike start to slide forward. At the same time, push forward forcefully with your right foot. Begin pedaling alternately with your left foot. Hold the handlebar firmly with both hands.

2. Instructions for Buttons and Display

Electric bike display panel showing speed, trip distance, battery level, and other metrics.
Electric bike display panel showing speed, trip distance, battery level, and other metrics. (Refer to manual for specific button layout)
  • Power Button ON/OFF: Hold the button for 3 seconds to switch the electric drive system on or off. The system will automatically turn off if left idling for more than 10 minutes.
  • Assist Mode: Use the '+' or '-' buttons to select the desired assist level. Level 1 is the lowest, and Level 3 is the highest.
  • Lights Button: With the display switched on, hold the button for 2 seconds to turn the headlight on or off.
  • Display Information: The display shows: Speed model, Trip distance (TRIP), Battery Level, Current speed, Speed unit, and Total distance (ODO).

3. Riding Modes

The electric bike provides three distinct riding modes:

  1. Fitness Mode: Turn off the electric lock and ride manually, similar to a traditional bicycle, for fitness purposes.
  2. Electric Power-Assisted Mode: Turn on the electric door lock. The control system will automatically provide electric power assistance based on your pedaling intensity, making riding easier and extending battery life.
  3. Electric Mode: Turn on the electric lock and use the accelerator to ride. Manual pedaling is not required, saving effort and providing an easy ride.

4. Braking

To slow down, loosen the throttle knob. For emergency braking, firmly grip both brake handles.

Note: When riding for the first time, turn the throttle slowly to gradually increase speed. This prevents sudden acceleration and loss of control.

Safety Notes

Always prioritize safety. Failure to follow these guidelines may result in serious injury or damage.

  • Always follow local traffic laws and regulations. It is forbidden to ride the electric bike on motorways.
  • Do not park the electric bike in building foyers, evacuation corridors, or safety exits.
  • Avoid riding on roads with severe water accumulation, as unknown road conditions can be dangerous.
  • Do not ride the electric bike after consuming alcohol.
  • The electric bike is not suitable for pregnant women or users over 60 years old.
  • The maximum load capacity of the electric bike is 250kg.
  • It is forbidden to ride the electric bike up and down stairs or to jump over obstacles.
  • It is forbidden for multiple people to ride the same electric bike simultaneously or to ride with children in your arms.
  • Do not ride with both hands off the handlebar.
  • Do not modify the electric bike yourself, as this may cause unstable operation of the electronic system and create riding hazards.
  • Do not modify the battery without permission. Improper battery modification is dangerous and may lead to explosion or fire.
  • Avoid riding in rain or snow. If you must ride in such conditions, slow down and use emergency braking carefully. Note that braking distance will be extended in wet conditions.
  • Before each ride, carefully check the bike's body and tires for any signs of looseness or damage.
  • When riding and braking, be aware of intersections to avoid unnecessary damage to yourself, others, or surrounding objects.
  • Turn off the power button when walking with the electric bike to prevent accidental acceleration of the throttle.
  • Recommended tire pressure: 180 Kpa - 200 Kpa.

Battery Instructions

This section details how to charge and maintain the battery, along with safety notices and specifications, to prolong battery life and performance.

1. Battery Safety

  • For stable and efficient operation, the battery must be charged and used within the specified temperature range.
  • Unplug the charger before installing or using the battery.
  • Do not disassemble or pierce the battery pack to avoid short circuits, which can cause battery damage or personal injury.
  • Do not expose the battery to water, fire (including near stoves, heaters), or high temperatures (above 50°C), as this may cause battery failure, overheating, or fire.
  • If water is suspected in the battery, stop using it immediately and send it for after-sales testing.
  • Only use the original charger. Using other chargers poses a risk of damage or fire.
  • If the battery is damaged, emits a peculiar smell, smoke, or overheats, discontinue use and avoid contact with other objects.
  • Fully charge the battery before storing after each use to extend its life.
  • Do not store the battery in temperatures above 50°C or below -20°C.
  • For storage longer than 30 days, fully charge the battery, store it in a cool, dry place, and recharge at least every 90 days. Failure to do so may damage the battery, and this damage is not covered by the warranty.
  • Avoid recharging when the battery is completely exhausted. Charge as soon as possible to greatly extend battery life.
  • Battery performance is higher at room temperature and decreases below 0°C. At -10°C, the cruising range may be half or less than at room temperature.
  • Dispose of used batteries according to local regulations to prevent environmental pollution.

2. Charging Steps

Open the dust cover on the battery, insert the DC plug of the charger into the charging base of the battery. Then, plug the AC plug of the charger into a standard AC power outlet (100-240V; 50/60Hz). The indicator light will turn red, indicating that charging has started.

Note: Only use the original standard power adapter. Using any other adapter may cause danger due to power mismatch.

3. Battery Notice

  • If the internal temperature of the battery exceeds 50°C, the battery will enter a protected state and cannot be charged.
  • A fully charged e-bike battery will drain its stored charge after approximately 90-120 days of standby. If it is not charged in time, excessive discharge may damage the battery irreversibly, and this damage is not covered by the free warranty.

Maintenance

1. Cleaning and Storage of Electric Bikes

  • Do not use alcohol, gasoline, kerosene, or other corrosive and volatile chemical solvents for cleaning, as these can damage the bike's appearance and internal structure.
  • Avoid using high-pressure water guns to spray and flush the bike. When cleaning, ensure the bike is turned off, the charger is unplugged, and the dust cover of the charging port is securely fastened to prevent electric shock or major failure due to water ingress.
  • Store the electric bike in a cool and dry indoor place. Avoid prolonged outdoor storage, as sun exposure, overheating, and cold outdoor environments can accelerate the aging of the bike's appearance and tires, and reduce the lifespan of the electric bike and its lithium battery.
  • For surface stains, wipe with a damp soft cloth. For scratched plastic parts, use sandpaper or other abrasive materials for polishing.

2. Tire Inflation and Maintenance

  • The tires are pneumatic. If the tire height sinks by 20%-30%, it needs to be inflated.
  • The recommended inflated tire pressure is 180 Kpa - 200 Kpa.
  • Inflate the tires at least once every 2-3 months. Regular inspection of tire inflation can help reduce punctures and extend tire life.

Troubleshooting

If you encounter any issues with your HUANCI Q3 electric bike, please refer to the following general guidance. For complex problems or issues not covered here, it is recommended to contact your dealer for professional assistance.

  • Handlebar Loose After Assembly: If the handlebar feels loose after installation, gently shake it and adjust the screw as shown in the assembly diagram. Ensure it is tightened sufficiently but not excessively, as this can prevent future folding.
  • Battery Issues: If the battery is damaged, emits a peculiar smell, smoke, or overheats, immediately stop using the battery and send it for after-sales testing. Do not attempt to repair or modify the battery yourself.
  • General Malfunctions: If the electric bike is not operating as expected, first check the battery level and ensure all connections are secure. If the problem persists, consult the detailed troubleshooting section in the full user manual (PDF) or contact your dealer.

For a comprehensive troubleshooting guide, please refer to the official user manual available as a PDF: HUANCI Q3 User Manual (PDF).

Specifications

HUANCI Q3 Electric Bike Specifications
CategoryParameterValue
Bike SpecificationProduct NameElectric bike
Unfold Size1650*670*1150mm
Folded Size1650*350*880mm
Net Weight30kg
Max Load200kg (from PRODUCT_PROP_PC) / 250kg (from OCR) - Using 200kg from PRODUCT_PROP_PC as it's more specific.
Max Speed<25km/h
Max Range with Power Assist Mode100-120km (from image/PRODUCT_PROP_PC)
PerformanceClimbing Angle30°
Max Slope30°
EnvironmentalOperating Temperature-10°C to 40°C
Storage Temperature-10°C to 40°C
Battery SpecificationTypeLithium Battery
Rated Voltage48V
Capacity20AH/960Wh (Also 10AH, 13AH options available)
Motor ParameterMode of MotorPermanent magnet brushless
Motor Power200-250W (from PRODUCT_PROP_PC) / 1000W/2000W (from OCR) - Using 200-250W as it's more common for <25km/h.
Rated Voltage48V
Charger ParameterInput Voltage100-240Vac 50/60Hz
Output Voltage54.6V DC
Output Current2A
Charging Time7-8 Hours
TireTire Size20 inch fat tire (20x4.0inch)
Recommended Tire Pressure180 Kpa - 200 Kpa
CertificationCertificationCE
FeaturesFeaturesRemovable battery, Foldable pole

Warranty and Support

1. Warranty Card

This product has passed the quality control inspection and is approved for sale. Please keep your warranty card and purchase invoice properly. You must present both the warranty card and purchase invoice when requesting repairs or warranty service.

Important: If the warranty card is not provided or is privately altered, the company reserves the right to treat the service as non-warranty.

2. Warranty Period

The warranty period for this product is 1 year from the effective date of purchase.

3. Contact Support

For any questions, issues, or warranty claims, please contact your dealer or the HUANCI customer support team.

User Tips

  • Effortless Riding: The electric assist makes climbing hills and longer rides much easier, enhancing the joy of cycling.
  • Intuitive Controls: The bike features an intuitive interface with multiple assist levels, allowing riders to easily adjust their desired power output.
  • Sturdy Cargo: The integrated cargo rack is robust and capable of handling weight effectively, making it suitable for carrying items.
  • Easy Assembly: Assembly is generally straightforward, with all necessary tools included. Online instruction videos can provide clear guidance for a smooth setup.

Statement of Compliance

⚠️ Disclaimer: Please be aware of potential fire risks and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with all applicable laws and regulations.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.