1. Safety & Warnings
BATTERY WARNING
KEEP OUT OF REACH OF CHILDREN. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Avoid contact with water or moisture.
- Do not attempt to modify the internal hardware or firmware, as this will void the warranty and may cause permanent damage.
- Do not use the mouse as a tool for striking or prying objects, as this will damage the internal structure.
2. Package Contents
Please check the package for the following items:
- MLOONG MX302 Mouse
- USB-C Data Cable
- Built-in Wireless Receiver (2.4G)
- User Manual

3. Setup
3.1 Charging the Mouse
The MX302 mouse is equipped with a 500mAh high-capacity, low-power battery, providing up to 150 hours of usage. It features NTC temperature control technology to protect battery safety and extend battery life.
- Charging Recommendations:
- It is recommended to charge the device using a computer's USB port.
- Do not use a fast-charging phone charger.
- Turn off the power switch if the device will not be used for an extended period.
- Keep away from high-temperature devices while charging.

3.2 Connecting the Mouse (Tri-Mode Connectivity)
The MX302 supports three connection modes: Wired (Type-C), 2.4G Wireless, and Bluetooth. You can switch between these modes freely to meet the needs of different scenarios.


- Wired Connection (Type-C): Connect the provided USB-C cable from the mouse to your computer's USB port. The mouse will be ready for use.
- 2.4G Wireless Connection: Insert the 2.4G wireless receiver into a USB port on your computer. Ensure the mouse is in 2.4G mode (usually indicated by a switch on the bottom). The mouse should connect automatically. For low-latency gaming, prioritize the 2.4G or wired connection.
- Bluetooth Connection: Switch the mouse to Bluetooth mode. On your computer or device, search for Bluetooth devices and select