PNY LED Magnetic Track Light User Manual

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your PNY LED Magnetic Track Light. Please read this manual thoroughly before installation and keep it for future reference.

Image: PNY LED Magnetic Track Light, showcasing compatibility with DALI, 0-10V, and ZigBee smart control systems.

2. Safety Information

WARNING: Electrical Shock Hazard

• Before performing any work on the device, ensure the mains voltage is switched off.
• This device must be installed and assembled by qualified personnel only.
• The safety of the device is guaranteed only if these instructions are followed properly. Keep this manual for any future maintenance.
• Cables or electrical components must not be exposed to water or detergents.
• Clean the unit using a damp cloth and a mild detergent in warm water. Wipe gently with a soft, clean cloth.

Level of Protection: IP20

This product complies with current provisions of European directives and bears the CE and RAEE labels.

3. Product Overview

The PNY LED Magnetic Track Light is a versatile lighting solution designed for magnetic track systems. It features a robust aluminum body, strong magnetic attachment, and adjustable light direction.

Image: Detailed analysis of the track light, highlighting features such as safety button, aluminum body, 350° rotation, 90° up and down adjustment, built-in strong magnet, buckle insurance design, thick copper sheet, OSRAM CRI≥90, and honeycomb anti-glare design.

Key Features:

• Magnetic Attachment: Easy and secure installation onto magnetic tracks.
• Adjustable Direction: 350° horizontal rotation and 0-90° vertical adjustment for precise lighting.
• High Color Rendering Index (CRI): OSRAM CRI≥90 ensures accurate color representation.
• Anti-Glare Design: Honeycomb anti-glare design for comfortable illumination.
• Smart Control Options: Available in DALI Dim and Tuya Zigbee Dim versions for adjustable color temperature and brightness.

4. Specifications

The following table details the technical specifications of the LED Magnetic Track Light (Model: 2ALGD2213CA-12W).

Image: Dimensions (132mm length, 82mm diameter, 147mm height, 16.5mm track width) and key specifications including 12W power, DC48V voltage, OSRAM COB light source, 10°/24°/36° beam angles, CRI≥90, and 4-wire magnetic track connection.

5. Installation

The PNY LED Magnetic Track Light is designed for easy installation on 48V magnetic tracks. Ensure power is OFF before installation.

5.1. Track Installation Methods

The magnetic track system supports various installation methods to suit different architectural needs:

• Embedded: Track is integrated flush with the ceiling.
• Recessed: Track is partially set into the ceiling.
• Surface: Track is mounted directly onto the surface of the ceiling or wall.
• Suspension: Track is hung from the ceiling using suspension cables.

Image: Visual representation of different magnetic track installation types: Embedded, Recessed, Surface, and Suspention.

5.2. Fixing the Magnetic Track

For secure installation, follow these steps for track fixation:

1. When the keel is hoisted, ensure the board is fixed.
2. The slotting width should be 35-40mm.
3. The track needs to be fixed to the board.
4. Shroud the board with plaster.
5. The track is screwed to the board recessed into the track groove.
6. Apply sealing plate and batch ash 2-3 times.

Image: Diagram detailing the magnetic track fixation process, including fixed plate, screw fixation, ceiling integration, and batch ash application. Track dimensions are also shown.

5.3. Installing the Spotlight onto the Track

The spotlights are designed for easy magnetic attachment and removal:

1. Ensure the main power supply to the track is OFF.
2. Align the magnetic base of the spotlight with the track.
3. Gently push the spotlight into the track until you hear a "CLICK," indicating a secure magnetic connection.
4. To remove, pull the spotlight firmly away from the track.
5. Once installed, you can adjust the spotlight's direction by rotating it 355° horizontally and tilting it 0-90° vertically.

Image: Magnetic track light being attached to the track, illustrating the magnetic connection with lightning bolt icons.

Image: Example of multiple magnetic track lights installed on a track, demonstrating various light types and arrangements.

6. Operating Instructions

The operation of your track light depends on the specific model purchased (fixed color temperature or dimmable smart versions).

6.1. Fixed Color Temperature Models (3000K, 4000K, 5000K)

These models provide a single, fixed color temperature and cannot be dimmed. Operation is typically via a standard wall switch connected to the track system.

• ON/OFF: Use the wall switch to turn the lights ON or OFF.
• Color Temperature: The light will emit at the specified color temperature (e.g., 3000K Warm White, 4000K Neutral White, 5000K Cool White).

6.2. Dimmable Smart Models (DALI Dim, Tuya Zigbee Dim)

These models offer advanced control over both color temperature and brightness. The default color temperature range is 2700K-5700K.

• DALI Dim: Requires a DALI-compatible control system. Refer to your DALI system's manual for specific control methods.
• Tuya Zigbee Dim: Requires a Tuya Zigbee gateway and compatible smart home application (e.g., Tuya Smart app).
1. Pairing: Follow the instructions in your Tuya Zigbee gateway's manual to add new Zigbee devices.
2. Control: Use the Tuya Smart app or other linked Zigbee controllers to adjust:
   • Brightness: Dim the light from 1% to 100%.
   • Color Temperature: Adjust the color temperature within the 2700K-5700K range.
• Custom Color Temperature (for DALI/Zigbee Dimmable models): If you specifically ordered DALI or Tuya Zigbee models with a fixed dimmable color temperature (e.g., DALI 3000K Dim, Tuya Zigbee 4000K Dim), these will dim within that specific color temperature. Otherwise, the default 2700K-5700K adjustable range applies.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your LED Magnetic Track Light.

• Cleaning:
  • Always switch off the mains voltage before cleaning.
  • Clean the unit using a damp cloth and a mild detergent in warm water.
  • Wipe the unit gently with a soft, clean cloth to dry.
  • Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• Inspection: Periodically check for any loose connections or visible damage to the light fixture or track. If any issues are found, consult qualified personnel for repair.

8. Troubleshooting

If you encounter issues with your LED Magnetic Track Light, refer to the following common troubleshooting steps:

• Light does not turn ON:
  • Check if the main power supply to the track is ON.
  • Ensure the spotlight is securely connected to the magnetic track (listen for the "CLICK").
  • Verify that the wall switch is in the ON position.
  • If using a smart dimmable model, check the app or controller to ensure it's not set to minimum brightness or OFF.
• Light flickers or dims unexpectedly:
  • Ensure the spotlight is making good contact with the track. Remove and re-attach it.
  • For dimmable models, check the dimmer settings in your smart home app or controller.
  • Verify that the voltage supplied to the track is stable and within the specified range (48V DC).
• Smart control (DALI/Zigbee) not working:
  • Ensure your DALI or Zigbee gateway is powered on and properly configured.
  • Check the network connection of your smart home system.
  • Attempt to re-pair the light fixture with your gateway if it has lost connection.

If the problem persists after trying these steps, contact qualified service personnel.

9. Warranty & Support

This product comes with a 5-year warranty.

For technical support or warranty claims, please contact PNY Official Store using the details below:

• Website: www.pnyled.com
• Tel: 008618938781688
• Email: Pny@pnyled.com
• Factory Address: Fuheng East Road, Yongxing Industrial Park, Henglan Town, Zhongshan City, Guangdong Province, China

A user manual in PDF format is also available for download:

View User Manual (PDF)