1. Introduction
This manual provides essential information for the safe and effective use of your YTYIN A+ 4pcs TPMS (Tire Pressure Monitoring System) sensors, designed for Haval series cars. Please read this manual thoroughly before installation and operation to ensure proper function and to prevent damage or injury.
2. Safety & Warnings
! CAUTION
Assembly kit contains parts with sharp edges and sharp points. Handle with care to avoid cuts or injuries.
General Safety Guidelines:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
Warning: Sharp parts.
Not suitable for children under 3 years.
3. Product Overview
The YTYIN A+ TPMS sensors are designed to monitor the tire pressure of your Haval vehicle, providing real-time data to ensure driving safety and optimal tire performance. This kit includes four photoelectric sensors.



4. Specifications
| Feature | Specification |
|---|---|
| Product Name | Automobile maintenance and replacement of parts |
| Model | 339-568893 |
| Batch/Serial Number | 202501023 |
| Brand Name | YTYIN |
| Sensor Type | Photoelectric |
| Electronic | No |
| High-concerned chemical | None |
| Origin | Mainland China |
| Manufacturer | Zhengzhou Qige Cheng Trading Co., Ltd. |
| EU Authorized Representative | Sophie Bennett, 9 rue du Bat d'Argent, 69001 Lyon, France |
5. Setup
Installation of TPMS sensors typically requires specialized tools and expertise. It is highly recommended to have these sensors installed by a qualified automotive technician to ensure correct fitment, programming, and functionality.
5.1 Pre-Installation
- Inspect Sensors: Before installation, carefully inspect each sensor for any signs of damage. Do not use damaged sensors.
- Remove Protective Films: If any protective films are present on the sensors, remove them before installation.
- Vehicle Compatibility: Ensure the sensors are compatible with your specific Haval vehicle model.
5.2 Installation Steps (Professional Recommended)
- Tire Removal: The tire must be removed from the wheel to access the valve stem area.
- Old Sensor Removal: If replacing existing sensors, carefully remove the old TPMS sensors from the valve stem.
- New Sensor Installation: Install the new YTYIN A+ TPMS sensors according to the vehicle manufacturer's specifications, ensuring a secure fit and proper orientation.
- Tire Remounting & Inflation: Remount the tire onto the wheel and inflate to the recommended pressure.
- Sensor Programming/Relearn: After physical installation, the new TPMS sensors will need to be programmed or undergo a relearn procedure with your vehicle's TPMS system. This process varies by vehicle model and often requires a diagnostic tool. Consult your vehicle's service manual or a professional technician for specific instructions.
6. Operating Instructions
Once properly installed and programmed, the TPMS sensors will automatically begin monitoring your tire pressure. The system will typically display tire pressure readings on your vehicle's dashboard or infotainment system. An alert will be triggered if tire pressure falls below or rises above a safe threshold.
6.1 Normal Operation
- The system continuously monitors tire pressure while driving.
- Refer to your vehicle's owner's manual for information on how to view tire pressure readings and interpret TPMS warnings.
6.2 After Use
These sensors are integrated into your vehicle's wheels and operate continuously. There is no specific 'off' procedure for the sensors themselves. For vehicle storage, ensure the vehicle is parked in a dry place.
7. Maintenance
Proper maintenance of your tires and TPMS sensors is crucial for safety and longevity.
- Regular Tire Pressure Checks: Even with TPMS, it is advisable to manually check your tire pressure periodically with a reliable gauge.
- Tire Rotation and Balancing: Follow your vehicle manufacturer's recommendations for tire rotation and balancing. Ensure that any service involving tire removal is performed by technicians familiar with TPMS systems.
- Sensor Inspection: During tire service, have the TPMS sensors inspected for any physical damage or corrosion.
- Valve Stem Caps: Always keep valve stem caps securely tightened to prevent moisture and dirt from entering the valve.
8. Troubleshooting
If you encounter issues with your TPMS system, consider the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| TPMS warning light is on | Low tire pressure in one or more tires. | Check all tire pressures and inflate to recommended levels. The light should turn off after driving a short distance. |
| TPMS warning light flashes then stays on | TPMS system malfunction (e.g., sensor battery low, sensor failure, system error). | Have the system diagnosed by a professional technician. Sensors may need replacement or reprogramming. |
| Incorrect pressure readings | Sensor malfunction, improper installation, or interference. | Verify tire pressure with a manual gauge. If discrepancies persist, consult a technician. |
| New sensors not detected | Relearn procedure not completed or failed. | Ensure the TPMS relearn procedure has been correctly performed. If issues persist, seek professional assistance. |
9. User Tips
- Professional Installation: For optimal performance and to avoid damage, always have TPMS sensors installed by a certified mechanic.
- Regular Checks: Even with TPMS, manually check your tire pressure monthly and before long trips.
- Winter Tires: If you use separate winter tires, ensure they also have TPMS sensors installed and properly programmed to avoid constant warning lights.
- Valve Stem Care: Be gentle with the valve stems during tire inflation, as they contain the sensor.
10. Compliance Information
This product complies with relevant European Union directives. The CE and FC marks indicate conformity with health, safety, and environmental protection standards.


Packaging Disposal: Packaging elements should be separated and deposited in the appropriate sorting bag for recycling.
Recycle packaging responsibly.
11. Warranty & Support
For warranty information, technical support, or any product-related inquiries, please contact the manufacturer or your point of purchase. Ensure you have your product model (339-568893) and batch/serial number (202501023) available when seeking support.
Manufacturer: Zhengzhou Qige Cheng Trading Co., Ltd.
EU Authorized Representative: Sophie Bennett, 9 rue du Bat d'Argent, 69001 Lyon, France