KAWA D6 3K

Contents

KAWA D6 3K Dash Cam Instruction Manual

Model: D6 3K

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your KAWA D6 3K Dash Cam. Please read this manual thoroughly before using the product to ensure proper function and safety. The KAWA D6 3K Dash Cam is designed to record high-definition video of your driving, offering features like voice control, enhanced night vision, and parking monitoring for a safer driving experience.

Package Contents

Ensure all items are present in your package:

  • KAWA D6 3K Dash Cam
  • User Manual
  • Car Charger
  • Power Cord (3.5 meters)
  • Heat-resistant Adhesive Paper
  • Anti-static Film
  • Micro SD Card (32GB included with some models)

Diagram of KAWA D6 3K Dash Cam package contentsImage: Contents of the KAWA D6 3K Dash Cam package.

Product Overview

Familiarize yourself with the components of your KAWA D6 3K Dash Cam:

  1. LED Indicator
  2. Microphone (MIC)
  3. Holder
  4. Holder Switch
  5. Speaker
  6. Micro SD Card Slot
  7. USB Port (Type-C)
  8. Camera Lens
  9. Heat-resistant Adhesive Paper

Diagram of KAWA D6 3K Dash Cam with labeled partsImage: Front view of the KAWA D6 3K Dash Cam.

Installation Guide

1. Install the Anti-static Film

  • Select a smooth and clean area on your windshield, avoiding edges, for the anti-static film.
  • Wipe the installation area thoroughly before applying the film.
  • Fully compress any air bubbles between the anti-static film and the windshield during installation.

2. Install the Micro SD Card

  • Insert the Micro SD card into the Micro SD card slot with the contact side down until you hear a "click" sound.

3. Attach the Dash Cam

  • Remove the protective film from the heat-resistant adhesive paper on the base of the holder.
  • Attach the dash cam to the dashed box area of the anti-static film.
  • Press the base of the holder firmly by hand to ensure a tight fit between the heat-resistant adhesive paper and the anti-static film.

4. Route Cables and Connect to Power Outlets

  • Route the power cord along the top of the windshield, down the A-pillar, and towards the storage box of the co-driver seat.
  • Connect the power cord to the car charger, and then insert the car charger into the cigarette lighter socket.

Diagram showing dash cam installation and cable routingImage: Visual guide for dash cam installation and power cable routing.

Note: The location of the cigarette lighter may vary between vehicles. The diagram is for reference only.

App Setup: KAWA AUTO

1. Download the App

Download the KAWA AUTO app by scanning the QR code below or searching for "KAWA AUTO" on Google Play or the App Store.

QR code for KAWA AUTO app and app store download buttonsImage: QR code and links to download the KAWA AUTO app.

2. Add Device to App

  • Open the KAWA AUTO app.
  • Click the "+" icon in the upper right corner.
  • Select "KAWA Dash Cam D6" and follow the in-app instructions.
  • During the device addition process, your phone needs to connect to the dash cam's Wi-Fi hotspot. Ensure the dash cam's hotspot is turned on.
  • Do not connect to other Wi-Fi networks or your home Wi-Fi during this process.
  • The hotspot name will be similar to "KAWA_D6_XXXX" (check product label). The initial password is 12345678.
  • Your phone's operating system should be Android 5.0 or iOS 8.0 and above.
  • If VPN is enabled on your phone, please disable it before connecting to the dash cam.

Screenshots of KAWA AUTO app interface for settings, live view, and video managementImage: Screenshots of the KAWA AUTO app showing settings, live checking, and video downloading.

Diagram showing connection steps for the KAWA AUTO appImage: Step-by-step guide for connecting the dash cam to the KAWA AUTO app.

Operating Instructions

Button Functions

The power button on the dash cam performs various functions based on how it's pressed:

StateOperationFunction
Power-off (power connected)Press power button for 1sTurn on the dash cam
Power-onPress and hold power button for 3sTurn off the dash cam
Click power buttonTurn on/off Wi-Fi
Double-click power buttonTurn on/off audio recording
Click power button 3 timesFormat Micro SD card
Click power button 5 timesReset to factory settings
Power-onPress and hold power button for 10sReset and restart the dash cam
Authorization request receivedClick power buttonGrant authorization

LED Functions

The LED indicator provides visual feedback on the dash cam's status:

StatusFunction
Remains greenNormal recording
Remains blueNot in recording mode
Remains redRecording error
Flashing quickly in greenRecord emergency video
Flashing quickly in blueProcess phase tasks
BreathesWi-Fi is enabled

Voice Control

The D6 3K Dash Cam supports smart voice control for hands-free operation. Simply use the following commands:

  • "Lock the video"
  • "Take photo"
  • "Turn on audio"
  • "Turn off audio"
  • "Turn on WiFi"
  • "Turn off WiFi"
  • "Turn on hotspot"
  • "Turn off hotspot"

Driver using voice command 'Take photo' to control dash camImage: A driver using voice control to take a photo with the dash cam.

List of smart voice control commands for the dash camImage: A visual representation of the smart voice control commands available.

Supported languages for voice control include English, French, Russian, Japanese, Thai, and Vietnamese.

Micro SD Card Usage and Maintenance

  • The Micro SD card is not always included in the package; you may need to purchase one separately.
  • Use a standard Micro SD card with a data rate of Class 10 or above, and a capacity between 16GB and 128GB.
  • Always insert an appropriate Micro SD card before using the dash cam.
  • When inserting a new Micro SD card for the first time, format it using the dash cam. This will delete all existing files on the card. Back up any important data beforehand.
  • To maintain optimal reading/writing speed, it is recommended to format the Micro SD card in the dash cam once a month.
  • If the Micro SD card becomes damaged or its writing speed declines after repeated overwriting, replace it immediately. The manufacturer is not liable for malfunctions caused by faulty Micro SD cards.
  • Use reputable, high-quality Micro SD cards to avoid discrepancies in speed and storage capacity.
  • Do not insert or remove the Micro SD card while the dash cam is turned on to prevent damage to recorded video or the card itself.

Key Features

3K Resolution

Experience crystal-clear video with 3K Ultra HD resolution, capturing every detail with sharpness and clarity. This ensures true-to-life images for enhanced dashcam footage.

Comparison of 3K Ultra HD vs Regular 1080P video qualityImage: Visual comparison demonstrating the superior clarity of 3K Ultra HD over 1080P.

360° Rotation & 180° Video Flip

The dash cam and its mount can be separated, allowing for 360° angle adjustment to record your desired view. The 180° video flip feature is particularly useful for recording the inside of the car, ensuring an upright video every time, whether installed on the windshield or dashboard.

Diagram showing 180 degree video flip and flexible installation optionsImage: Illustration of the 180° video flip and flexible installation for perfect viewing.

NightEagle™ Engine - Enhanced Night Vision

KAWA's NightEagle™ Engine is a night vision processing technology that sharpens key details like license plates in low-light conditions. This helps capture clearer nighttime footage for safer driving.

Starlight Color Night Vision features including Light-Balanced Tech, F2.0, WDR, 3D DNRImage: Starlight Color Night Vision features for clear night recording.

Comparison of NightEagle night vision versus standard night visionImage: A comparison showing the improved clarity of NightEagle™ Engine night vision.

Upgraded DSI-2 tech boosts night vision by 30%Image: Illustration of 30% boost in night vision with upgraded DSI-2 technology.

Super Capacitor

The dashcam is powered by a super capacitor instead of a traditional lithium-ion battery. This design offers ultra-durability, a longer lifespan, and is resistant to fire, explosion, and extreme temperatures (Working Temp: -4°F (-20°C) ~ 158°F (70°C); Storage Temp: -22°F (-30°C) ~ 176°F (80°C)). It is also more environmentally friendly by avoiding harmful battery chemicals.

Diagram illustrating the benefits of a super capacitor in the dash camImage: Benefits of the Super Capacitor, including temperature resistance.

Wide Dynamic Range (WDR) Technology

WDR technology intelligently balances highlights and shadows, capturing clear, detailed footage even in challenging lighting conditions. This feature ensures balanced images in both bright sunlight and low-light environments, making videos clearer and more useful for identifying objects or license plates.

Image demonstrating WDR technology balancing light in bright and dark areasImage: How WDR technology provides clear images in both bright and dark conditions.

Loop Recording

The dash cam features endless loop recording, automatically overwriting the oldest video files when the Micro SD card is full. This ensures continuous recording without interruption, with options for 1, 2, or 3-minute loop segments.

Diagram showing loop recording and estimated storage times for different SD card sizesImage: Illustration of endless loop recording and storage capacity for various SD card sizes.

Emergency Recording (G-Sensor)

When an emergency collision occurs, the built-in G-sensor automatically triggers recording and locks the video. These emergency videos are stored in a separate folder to prevent them from being overwritten by regular loop recordings, protecting vital evidence.

Diagram showing G-sensor activated emergency recording during a collisionImage: Emergency Recording feature activated by G-sensor during a collision.

Parking Monitoring (24/7)

The dash cam automatically switches to parking mode to monitor and protect your vehicle when parked. It detects unusual motion or impacts and starts recording immediately, providing 24-hour surveillance against potential incidents or break-ins.

Diagram showing 24/7 parking monitoring, G-sensor emergency recording, and time-lapse modeImage: Overview of 24/7 Parking Monitor, G-Sensor Emergency Recording, and Time-lapse mode.

Illustration of time-lapse recording and 24H parking monitoringImage: Time-lapse recording and 24H Parking Monitoring features.

Note: Parking monitoring requires an additional hardwire kit (PT01) for continuous power supply when the vehicle is off. This kit is not included and must be purchased separately.

Specifications

AttributeValue
Product NameDash Cam
ModelD6 3K
Brand NameKAWA
Image Resolution2560*1440 (3K)
Optical Format1/2.8"
Aperture (F/NO.)F2.0
FOV Angle145°
Input/Output5V 1.5A
Power SourceCorded Electric (Car Charger)
Power PortType-C
Car ChargerSplit-type
Cable Length3.5M
Weight0.25KG
APP CompatibilityKAWA AUTO
Data Storage Capacity32GB (included with some models)
Max External Memory256G
Memory Card Required Reading SpeedClass 10
Built-in ScreenNo
Touch ScreenNo
Loop-Cycle Recording FeatureYes
Audio RecordedYes
Maximum Video Frame Rate30 FPS
NightShot FunctionYes
Rear CameraNone
Original PackageYes
Video CodeH.265
Video FormatMP4
Is Batteries IncludedNo
Battery TypeSuper Capacitor
Battery Capacity(mAh)No (Super Capacitor)
Special FeaturesG-Sensor, Display Rotate, SD/MMC Card, Real Time Surveillance, Wide Dynamic Range, Wi-Fi Function, Voice Control, Parking Monitor, 3D DNR
Number Of Lenses1
Pixels≤300Mega
OSD LanguageArabic, English, French, Hebrew, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Thai, Turkish, Ukrainian, Vietnamese
GPS loggerNone
Assembly ModeHidden Type
Chipset ManufacturerMSTAR
OriginMainland China
Item TypeCar DVR
CertificationCE, FCC, WEEE

Comparison table of KAWA D6 3K and D6 dash cam modelsImage: Detailed comparison of D6 3K and D6 models.

Maintenance

  • **Cleaning:** Do not use chemical solvents or detergents to clean the product. Use a soft, dry cloth.
  • **Temperature:** Do not use this product at a temperature higher than 65°C or lower than -20°C.
  • **Storage:** If the product is kept idle for a long time, the battery power may be exhausted. You may need to set the system time manually when the product is turned on next time.
  • **Physical Handling:** Do not subject this product to violent shocks or vibrations to avoid damage or malfunction.
  • **Micro SD Card:** Format the Micro SD card in the dash cam once a month to prevent a decline in reading/writing speed. Replace the Micro SD card immediately if it becomes damaged or its writing speed declines.

Troubleshooting

  • **Dash Cam Not Turning On:** Ensure the power cord is securely connected to both the dash cam and the car charger, and the car charger is properly inserted into the cigarette lighter. Check if the vehicle's cigarette lighter socket is receiving power.
  • **Recording Issues (Red LED):** This indicates a recording error. Check if the Micro SD card is inserted correctly and is not full or damaged. Try formatting the Micro SD card via the dash cam settings (click power button 3 times). If the issue persists, replace the Micro SD card.
  • **Wi-Fi Connection Problems:** Make sure the dash cam's Wi-Fi hotspot is enabled (LED breathes). Ensure your phone's Wi-Fi is connected to the dash cam's hotspot (KAWA_D6_XXXX) and not another network. Disable any VPN on your phone before connecting.
  • **App Not Connecting:** Verify your phone's operating system is Android 5.0/iOS 8.0 or above. Ensure the dash cam's Wi-Fi is connected to your phone. Try restarting both the dash cam and your phone.
  • **Poor Video Quality:** Check the lens for dirt or smudges and clean it gently. Ensure the anti-static film and dash cam are securely mounted and not vibrating excessively.
  • **Dash Cam Not Turning Off Automatically:** If your vehicle's cigarette lighter continues to supply power after the engine is off, manually turn off the dash cam (press and hold power button for 3s) or disconnect the car charger to prevent vehicle battery drain, especially if parking monitoring is not enabled.

User Tips

  • **Power Cord Length:** If your car's power outlet is far from the windshield (e.g., in the armrest storage), you might need a slightly longer power cord for easier installation.
  • **Wi-Fi Connection:** When connecting to the app via Wi-Fi, ensure you follow the instructions carefully. Some users initially find it unclear but confirm it works perfectly when instructions are followed.
  • **Apple CarPlay & Streaming:** If you use an iPhone with Apple CarPlay, direct streaming from the dash cam to your iPhone simultaneously while driving might not be possible. The camera will still record, and footage can be analyzed later via the app.
  • **Installation Time:** Many users report that installation and setup are quick and easy, often taking less than 30 minutes.
  • **Video Quality:** The video and photo quality is generally good and clear, providing essential recording capabilities.

Safety Precautions

Before Installation

  • Always use the supplied accessories. Using non-supplied or incompatible accessories may damage the product or cause it to fall off.
  • Do NOT install the product in hot or humid locations, such as near heaters, air vents, or areas exposed to rain.
  • WARNING: Do NOT install this product in locations that block the driver's view, compromise vehicle safety functions (like airbags or hazard light switch), or impair the driver's ability to operate the vehicle safely.
  • Do NOT install this product in front of or at the sides of the dashboard, vehicle door, or pillar where airbags may deploy. Refer to your vehicle's user manual for airbag deployment areas.

General Notes

  • This product is a driving assistance tool for recording events around your vehicle and is not intended to replace safe driving practices. The manufacturer is not liable for accidents, information loss, or issues arising from product failure or user operation.
  • Due to varying vehicle conditions, driving habits, or environments, some functions may not work optimally. Factors like power failure, extreme temperatures, collisions, or Micro SD card damage can cause recording failures. The product does not guarantee that all videos will be saved under all circumstances. Recorded videos are for reference only.
  • Keep this product away from strong magnetic fields to prevent damage.
  • The product can record vehicle accidents, but minor collisions may not activate the collision sensor, meaning their images might not be recorded in the special folder.
  • Avoid exposing the product to water drops or splashes. Keep it dry to prevent malfunction.

Warranty and Support

Warranty

The KAWA D6 3K Dash Cam comes with a 12-month limited warranty.

Manufacturer Information

  • Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
  • Address: FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG

Contact Support

KAWA Official Customer Service and factory imagesImage: KAWA Official Customer Service information and manufacturing facilities.

Certification and Compliance

CE Certification

This device complies with the radio interference requirements of the European Community.

The Dash Cam is designed for operation in environments with temperatures between -20°C and 65°C, and can operate under 2000m altitude. KAWA ELECTRONICS COMPANY LIMITED declares that this Dash Cam radio equipment type complies with Directive 2014/53/EU.

SAR Information

Head SAR and Body SAR tests were performed with the device configured according to EN62311. Body SAR was performed with the device 200mm from the phantom, and also with the headset attached and without.

Adapter and Battery

  • The adapter should be installed near the equipment and be easily accessible.
  • Risk of explosion if the battery (super capacitor) is replaced by an incorrect type. Dispose of used batteries according to instructions.
  • Only use adapters from Manufacturer: Stuff Electronics (Dong Guan) Limited. The plug can be disconnected from the adapter.

Operating Frequency Range

Operating Frequency RangeMaximum RF Output Power
WiFi: 2412 - 2472 MHz16.73dBm EIRP

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

If interference occurs, try the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FCC ID: 2AZWZ20221

IC Compliance (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC

This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

IC: 27280-D6

Waste Disposal (WEEE)

Various product certifications and compliance logosImage: Collection of product certifications including SMETA, amfori BSCI, CE, and Canadian Certification.

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Product Video Overview

Video: A comprehensive overview of the KAWA D6 3K Dash Cam's features and functionalities.

© 2025 KAWA. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.