XIAOMI Mijia Sonic Vibration Electric Toothbrush Pro

Contents

Xiaomi Mijia Sonic Vibration Electric Toothbrush Pro User Manual

Model: Mijia Sonic Vibration Electric Toothbrush Pro

1. Safety Information

Please read all safety instructions carefully before using the product and retain this manual for future reference.

Warnings

  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • The appliance contains non-replaceable batteries.
  • The product can only be charged with a safety extra-low voltage power supply with an output voltage of 5V and current of 1A.
  • Users with dental corrections, dental fillings, implants, etc., should consult a dentist before use.
  • This product complies with electromagnetic device safety standards. For any concerns involving pacemakers or other implanted devices, consult a doctor or device manufacturer before use.
  • This product is designed for cleaning teeth, gums, and tongue only. Do not use for any other purpose. If you experience any pain or discomfort during use, stop immediately and consult a dentist.
  • Ensure the charging port cover is tightly closed during use.
  • The product contains a rechargeable battery. Do not throw it into fire, or charge, use, or store it in high-temperature environments.
  • Do not hit or drop the product. If the product is damaged due to impact or fall, stop using it.
  • Do not modify, disassemble, or repair this product yourself.
  • Children should not use this device as a toy.
  • Cleaning and user maintenance should not be performed by children without supervision.

Cautions

  • Before use, check for any obvious damage, such as damage or severe drops. Do not use if damaged.
  • Before charging, ensure the charging port and charging cable are dry to avoid electric shock or short circuit.
  • During daily use, keep the charging port cover tightly closed to prevent water ingress and short circuits.
  • Do not use while bathing or showering.
  • Do not share brush heads with others.
  • When using this product for the first time, you may experience itching or slight bleeding. This is because your gums are not yet accustomed to this efficient cleaning. It is recommended to start with the gentle cleaning mode. This phenomenon usually stops within 1 to 2 weeks. If it persists for more than 2 weeks, stop using the toothbrush and consult a dentist.

2. Product Overview

The Xiaomi Mijia Sonic Vibration Electric Toothbrush Pro is designed for effective oral hygiene with smart features. It includes multiple brushing modes, an LED screen for real-time feedback, and a travel lock function.

Components

Diagram of Xiaomi Mijia Sonic Vibration Electric Toothbrush Pro components
Figure 1: Product Components
1. Power Shaft
2. Display Screen
3. Toothbrush Handle
4. Over-pressure Indicator Ring
5. Power Button
6. Charging Port
7. Charging Port Cover
8. Mijia Soft Cleaning Brush Head
9. Mijia Gentle Care Brush Head
10. Type-C Charging Cable
11. User Manual
12. Quick Start Guide

Note: Illustrations of products, accessories, and user interfaces in this manual are for reference only. Due to product updates and upgrades, the actual product may differ slightly from the illustrations. Please refer to the actual product.

3. Setup

Installing the Brush Head

  1. Align the brush head bristles with the front of the toothbrush handle.
  2. Push the brush head down onto the handle until it clicks into place.
  3. Ensure there is a small gap (0.4-1mm) between the brush head and the handle. This gap is essential to prevent the brush head from colliding with the handle during high-frequency vibrations, allowing the motor to operate with maximum power.
Diagram showing how to install the brush head with a 0.4-1mm gap
Figure 2: Brush Head Installation (showing the required gap)

Charging

  1. Open the charging port cover.
  2. Ensure the charging port is dry, then insert the Type-C charging cable and connect it to a power source.
  3. Place the product on a stable surface for charging.

Battery Status Indication:

Toothbrush Status Battery Level Screen Display
Operating 20%-100% None
Operating 5%-20% Low battery (can power on)
Operating <5% Low battery (cannot power on)
Charging 0-100% Displays battery level for the first 20 seconds, then turns off.

Note: When the toothbrush battery is completely depleted, a full charge takes approximately 6 hours.

Charging Port Moisture Detection

When connecting the charging cable, if the screen displays "Charging port wet", it indicates liquid in the charging port. This poses a short-circuit risk. Ensure the charging port is dry before charging.

Diagram showing charging port moisture detection warning and how to dry it
Figure 3: Charging Port Moisture Warning and Drying Steps

If liquid is detected, follow these steps to clean:

  1. Unplug the charging cable.
  2. Tilt the charging port downwards to drain any excess liquid.
  3. Place the toothbrush and charging cable in a well-ventilated, dry area to air dry. Once completely dry, attempt to charge again. If the screen still shows "Charging port wet", it is recommended to extend the drying time until charging resumes normally.

Note: Do not use paper towels, cotton swabs, or other objects to wipe the charging port to avoid introducing foreign matter.

4. Operating Instructions

Power On/Off and Mode Switching

  • Power On: Short press the power button.
  • Mode Switching/Pause: Within 10 seconds of powering on, short press to cycle through Soft, Standard, Deep Cleaning, and Smart modes, as well as pause. After 10 seconds, a short press will only pause the brushing.
  • Power Off: In pause mode, the toothbrush will automatically power off after 12 seconds of inactivity.
  • Restart: Long press the power button for more than 12 seconds to restart the toothbrush.

Lift-to-Wake Function

When the toothbrush is off, you can lift it manually to wake it up. The screen will display recent brushing information.

Note: Repeatedly triggering the lift-to-wake function multiple times in quick succession may temporarily disable it. Charging or powering on the toothbrush will restore the function.

Brushing Modes

Diagram showing the four brushing modes: Soft, Standard, Deep Cleaning, Smart
Figure 4: Brushing Modes
  • Soft Cleaning: Suitable for new users and those with sensitive gums.
  • Standard Cleaning: Suitable for daily oral cleaning.
  • Deep Cleaning: Suitable for deep cleaning in blind spots like tooth gaps.
  • Smart Cleaning: Adapts cleaning to different tooth surfaces.

Notes:

  • New users are recommended to prioritize using the Soft Cleaning mode.
  • The toothbrush has a 3-second gradual power-up function when turned on, gradually increasing vibration intensity over 3 seconds.

Healthy Brushing Technique

For optimal brushing results, it is recommended to use the Bass brushing method. Position the bristles at a 45-degree angle to the gumline and gently move the toothbrush. The toothbrush will briefly pause every 30 seconds to remind you to switch brushing areas.

Diagram illustrating the 45-degree brushing angle and 30-second quadrant reminders
Figure 5: Brushing Technique and Quadrant Reminders

Over-pressure Reminder Ring

This toothbrush features a pressure reminder function. When brushing too hard, the over-pressure indicator ring will flash red, and the toothbrush will reduce its vibration frequency to prevent tooth damage. The pressure reminder function can be enabled or disabled in the toothbrush display settings interface.

Image of the toothbrush handle showing the over-pressure indicator ring glowing red
Figure 6: Over-pressure Indicator Ring

Smart Interactive Interface

The toothbrush's display provides real-time feedback and settings. (Refer to Figure 7 for visual examples)

Image of the toothbrush display showing various smart features like stain risk, brushing status, and intensity
Figure 7: Smart Interactive Display
  • Recent Risk Assessment: The system's algorithm analyzes recent brushing behavior. After lifting the toothbrush, the display shows recent brushing information to help users identify oral problems promptly.
    • Note: The recent risk assessment will be displayed based on actual brushing conditions. It will not be displayed during the first use.
    • Note: Plaque risk results are calculated based on factors such as recent brushing coverage and brushing interval time, for reference only.
  • Unbrushed Area Reminder: After brushing is paused or completed, the screen will provide feedback on unbrushed areas using regional detection. Cleaned areas are shown in white, and unbrushed areas in orange.
    • Orange: Unbrushed area
    • White: Cleaned area
    • Tip: You can continue brushing the orange areas to achieve better coverage.
    • Tip: The duration of supplementary brushing for unbrushed areas varies. Once all unbrushed areas are covered, the toothbrush will automatically pause and display brushing results.
    • Tip: To achieve relatively accurate brushing results, it is recommended to keep your head stable and look straight ahead during brushing.
  • Brushing Result Display: After brushing is paused or completed, the screen will display the current brushing results, including brushing coverage, brushing evaluation, and brushing duration.
  • Function Settings Interface: In pause or wake-up mode, long press the power button for 3 seconds to enter the settings. Long press the power button for 3 seconds again to enter the next setting option, and short press to switch selections.

5. Maintenance

Cleaning the Brush Head

  1. After brushing, rinse the brush head under running water.
  2. After rinsing, shake off excess water from the brush head and let it air dry in a well-ventilated area.

Note: Dentists recommend replacing the brush head every three months.

Cleaning the Toothbrush Handle

Wipe the toothbrush handle with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals.

Storage

When not in use for an extended period, ensure the toothbrush is fully charged and stored in a cool, dry place.

6. Troubleshooting

If you encounter any issues with your toothbrush, please refer to the table below for common problems and solutions.

Problem Possible Cause Solution
Cannot power on Low battery Charge the toothbrush
System error Long press the power button for 12 seconds to restart
No vibration Brush head not installed correctly Reinstall the brush head
Charging port wet warning Liquid in charging port Dry the charging port as per instructions in Section 3.3
Short battery life Frequent use of high-intensity modes Use lower intensity modes or charge more frequently
Toothbrush stops unexpectedly Over-pressure triggered Reduce brushing pressure

7. Specifications

Feature Detail
Brand Name XIAOMI
Item Type ELECTRIC TOOTHBRUSH
Model Number MES601
Power Type Rechargeable (Battery Included)
Number of Operating Modes 4 or more (Deep cleaning, Whitening, Gentle cleaning, Massage)
Number of Nozzles 2 (typically included)
Type Acoustic Wave
Bristle Stiffness Medium
Material ABS
Commodity Quality Certification 3C, CE
Age Group Adults
Origin Mainland China
Rated Power 2.5W
Rated Input 5V=1A
Waterproof Rating IPX8

8. User Tips

  • Changing Language: To change the display language from Chinese to English, hold the main power button in standby mode for 3 seconds. Navigate to the language options, select "En", then hold the button again for 3 seconds to save the selection.
  • Extending Brushing Time: If you wish to brush for longer than the default cycle, you may need to manually extend it by pressing the start button again after the cycle completes.
  • Waterproofing: The toothbrush is designed to be waterproof (IPX8 rating), making it safe for use in wet environments.
  • Initial Use: Some users report that the toothbrush feels a bit clunky or heavy initially compared to other brands, but provides superior cleaning.

9. Frequently Asked Questions (FAQ)

Q: Is the toothbrush rechargeable or does it use batteries?
A: The Xiaomi Mijia Sonic Vibration Electric Toothbrush Pro is rechargeable and includes a built-in battery.

10. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual PDF provided by the manufacturer. A digital version of the user manual (PDF) can be found at: User Manual (PDF).

For service inquiries, you may contact the manufacturer's support line (if available in your region) or the seller for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.