Introduction
Thank you for choosing the ANYFAR 5-Inch Touch Screen Motorcycle CarPlay & Android Auto System. This device is designed to enhance your riding experience by providing seamless integration of your smartphone's features, including navigation, music, and communication, directly onto your motorcycle's dashboard. With its robust IP67 waterproof design, dual camera recording capabilities, and optional Tire Pressure Monitoring System (TPMS), this system ensures both convenience and safety on the road.
Package Contents
Please check the package for the following items:
- ANYFAR 5-Inch Touch Screen Unit
- Power Cable
- Mounting Bracket
- Front Camera (if included in your model)
- Rear Camera (if included in your model)
- TPMS Sensors (Front 'A' and Rear 'B', if included in your model)
- User Manual (PDF available online)
Setup
1. Mounting the Screen
Attach the provided mounting bracket to your motorcycle's handlebar. Secure the 5-inch touch screen unit to the bracket, ensuring it is firmly in place and positioned for optimal visibility without obstructing your view of the road or controls.
2. Wiring Connections
Refer to the installation diagram for proper wiring. Ensure all connections are secure and waterproof.
- Power Wire (Red): Connect to the motorcycle battery's positive terminal.
- Ground Wire (Black): Connect to the motorcycle battery's negative terminal.
- ACC Power Supply: Connect the ACC power supply and negative terminal for ignition-switched power.
- Front Camera: Connect the front camera cable to the designated port.
- Rear Camera: Connect the rear camera cable to the designated port.
- Motorcycle CarPlay Screen: Connect the main power and camera cables to the screen unit.
3. TPMS Sensor Installation and Pairing (if applicable)
If your model includes TPMS sensors, follow these steps to install and pair them:
- Power on the motorcycle screen unit.
- Navigate to the settings menu and locate the "Tire Pressure Monitoring" option.
- Select the option to start pairing.
- For the Front Wheel: Take the TPMS sensor labeled 'A' and screw it onto the front wheel's valve stem. The screen should display "Pairing Successful" and show the front tire pressure and temperature.
- For the Rear Wheel: Take the TPMS sensor labeled 'B' and screw it onto the rear wheel's valve stem. The screen should display "Pairing Successful" and show the rear tire pressure and temperature.
- You can adjust the pressure units (Bar, Psi) and temperature units (°C, °F) within the TPMS settings. You can also set high and low pressure alarm values.
Operating Instructions
1. Power On/Off
The device will typically power on automatically with the motorcycle's ignition (if connected to ACC power). To manually power on/off or restart, use the designated power button on the unit.
2. Wireless CarPlay & Android Auto
This system supports wireless CarPlay and Android Auto for seamless smartphone integration.
- Ensure Bluetooth is enabled on your smartphone.
- On the motorcycle screen, go to the "PhoneLink" or "CarPlay/Android Auto" section.
- Search for and select your device from the list of available Bluetooth devices.
- Confirm the pairing code on both your phone and the screen.
- Once paired via Bluetooth, the system will automatically establish a Wi-Fi connection for CarPlay or Android Auto functionality.
3. Navigation, Music, and Phone Calls
Once connected to CarPlay or Android Auto, you can access your phone's compatible apps directly from the screen:
- Navigation: Use your preferred navigation app (e.g., Apple Maps, Google Maps) for turn-by-turn directions.
- Music: Stream music from your favorite apps (e.g., Apple Music, Spotify) with album art and controls displayed on the screen.
- Phone: Make and receive calls, access your contacts, and view messages safely using the screen's interface and voice commands.
4. Dual Camera Recording
If your system includes dual cameras, they will automatically begin recording when the device is powered on. You can access recorded footage and manage camera settings through the screen's interface.
- The cameras provide a 140° wide-angle view in 1080P resolution.
- Ensure an SD card is inserted for recording storage.
5. TPMS Monitoring (if applicable)
After successful pairing, the TPMS section of the screen will continuously display real-time tire pressure and temperature for both front and rear wheels. The system will alert you if values fall outside the set alarm thresholds.
Maintenance
- Cleaning: Use a soft, damp cloth to clean the screen and unit. Avoid harsh chemicals or abrasive materials.
- Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
- SD Card: If using for recording, regularly check the SD card for available space and format it periodically to maintain optimal performance. The SD card slot is located under two screws on the bottom of the unit.
- Waterproofing: The unit is IP67 waterproof. Ensure all port covers are securely closed to maintain water resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | No power connection or faulty wiring. | Check power cable connections to the battery and ACC. Ensure the motorcycle's ignition is on. |
| CarPlay/Android Auto not connecting. | Bluetooth/Wi-Fi issues, phone compatibility. | Ensure Bluetooth and Wi-Fi are enabled on your phone. Restart both the phone and the motorcycle screen. Re-pair the devices. Check phone compatibility with CarPlay/Android Auto. |
| No camera display/recording. | Camera cable disconnected, no SD card, faulty camera. | Check camera cable connections. Ensure an SD card is inserted and properly formatted. Test cameras individually if possible. |
| TPMS sensors not pairing or showing incorrect readings. | Incorrect installation, sensor battery low, pairing error. | Ensure sensors are correctly installed on the designated wheels (A for front, B for rear). Follow the pairing steps in the Setup section carefully. Check sensor batteries. |
| Screen unresponsive. | Software glitch, power issue. | Try restarting the device by holding the power button. If unresponsive, disconnect and reconnect power. |
Specifications
| Feature | Detail |
|---|---|
| Model | PCD026-TPMS-C |
| Screen Size | 5 inches |
| Display | Full HD Touch Screen |
| Connectivity | Wireless CarPlay, Wireless Android Auto, Bluetooth 5.0, WiFi |
| Waterproof Rating | IP67 |
| Camera Recording | Dual 1080P (Front & Rear) |
| Storage Support | TF/SD Card |
| Built-in Chip | 5G Chip |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 17 cm x 12 cm x 11 cm |
| Package Weight | 0.486 kg |
User Tips
- SD Card Access: The SD card slot for camera recording is located under two screws on the bottom of the main unit. You will need to remove these screws to insert or remove the SD card.
- Installation Time: For users with some DIY experience, the installation process typically takes 1-2 hours.
Warranty & Support
For detailed warranty information and further technical support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:
If you encounter any issues not covered in this manual or require further assistance, please contact the seller or manufacturer's customer support.