1. Introduction
The M5Stack Cap LoRa 1262 is a high-performance communication expansion module designed to integrate LoRa wireless communication and GNSS global positioning capabilities with the Cardputer-Adv. This module is equipped with an HY2.0-4P expansion interface, ensuring stable connection and functional expansion with host devices.
It features an SX1262 LoRa transceiver for long-distance, low-power wireless links (868MHz ~ 923MHz frequency band) and an ATGM336H GNSS chip with a built-in ceramic antenna for accurate satellite positioning. The module supports multiple navigation systems including GPS, QZSS, BD2, BD3, GALILEO, and GLONASS, offering strong anti-interference and high positioning accuracy even in weak signal environments.
2. What's in the Box
The package for your M5Stack Cap LoRa 1262 module should contain the following items:
- 1 x Cap LoRa-1262 Module
- 1 x LoRa Rubber Antenna
3. Setup Instructions
The Cap LoRa 1262 module is designed for plug-and-play integration with the Cardputer-Adv. Follow these steps to set up your module:
- Ensure your Cardputer-Adv is powered off.
- Align the Cap LoRa 1262 module with the EXT 2.54-14P interface on your Cardputer-Adv.
- Gently press the module into place until it is securely connected.
- Attach the LoRa Rubber Antenna to the SMA connector on the Cap LoRa 1262 module.
- Power on your Cardputer-Adv. The module should now be recognized and ready for use.
4. Operating Instructions
Once connected, the Cap LoRa 1262 module provides both LoRa communication and GNSS positioning functionalities. Specific operation will depend on the software or firmware loaded onto your Cardputer-Adv.
4.1. LoRa Communication
The integrated SX1262 LoRa transceiver operates within the 868MHz to 923MHz frequency band. It supports various modulation modes including FSK, GFSK, MSK, GMSK, LoRa, and OOK. The external LoRa antenna ensures optimal signal transmission and reception for long-range, low-power applications.
4.2. GNSS Positioning
The ATGM336H GNSS chip provides global positioning services. It supports multiple satellite navigation systems (GPS, QZSS, BD2, BD3, GALILEO, GLONASS) for enhanced accuracy. The built-in ceramic antenna handles GNSS signal reception. For best performance, ensure the module has a clear view of the sky.
5. Scope of Application
The M5Stack Cap LoRa 1262 module is suitable for a wide range of applications requiring long-range communication and precise positioning:
- Remote data acquisition
- Smart cities infrastructure
- Smart homes automation
- Vehicle positioning and navigation systems
- Internet of Things (IoT) device positioning
- Outdoor communication terminals
6. Specifications
| Specification | Parameter |
|---|---|
| LoRa Module | SX1262 |
| LoRa Frequency Range | 868 ~ 923 MHz |
| LoRa Programmable Bitrate | Up to 300kbps |
| LoRa Communication Interface | SPI |
| LoRa Antenna | Size 108 x 9.3mm, Interface Type SMA (internal thread, internal hole), Gain 3dBi |
| LoRa Transmit Power | +22dBm |
| LoRa Receiver Sensitivity | -147dBm (LoRa Low Data Rate Mode) |
| LoRa Operating Current | DC 5V@163.4mA |
| Supported Modulation Modes | FSK / GFSK / MSK / LoRa / OOK |
| GPS Module | ATGM336H-6N@AT6668 |
| GPS Communication Interface | UART, default 115200bps@8N1 |
| Supported GNSS Systems | GPS / QZSS / BD2 / BD3 / GAL / GLO |
| BDS | B1I+B1C |
| GPS / QZSS / SBAS | L1 |
| GALILEO | E1 |
| GLONASS | R1 |
| GPS Channels | 50 Channels |
| GPS Positioning Accuracy | <1.5m (CEP50) |
| GPS Update Rate | Up to 10Hz |
| GPS Protocol | NMEA 0183 4.1 |
| Tracking | -162dBm |
| Acquisition | -160dBm |
| Cold Start | -148dBm |
| Cold Start Time | 23s |
| Hot Start Time | 1s |
| Power Consumption (Power On) | 33.1mA |
| Product Size | 84.0 x 24.0 x 15.2mm |
| Product Weight | 22.1g (excluding antenna) |
7. PinMap
7.1. Cap LoRa-1262 Pinout
| PIN | LEFT | RIGHT | PIN |
|---|---|---|---|
| GPS_TX | 1 | 14 | LoRa_NSS |
| GPS_RX | 2 | 13 | LoRa_MISO |
| SCL | 3 | 12 | LoRa_MOSI |
| SDA | 4 | 11 | LoRa_SCK |
| 5V_OUT | 5 | 10 | LoRa_BUSY |
| GND | 6 | 9 | LoRa_IRQ |
| 5V_IN | 7 | 8 | LoRa_RST |
7.2. Cardputer-Adv (LoRa) Pin Mapping
| Cardputer-Adv | G3 | G4 | G6 | G40 | G14 | G39 | G5 |
|---|---|---|---|---|---|---|---|
| Cap LoRa-1262 (LoRa) | RST | IRQ | BUSY | SCK | MOSI | MISO | NSS |
7.3. Cardputer-Adv (GPS) Pin Mapping
| Cardputer-Adv | G13 | G15 |
|---|---|---|
| Cap LoRa-1262 (GPS) | GPS-RX | GPS-TX |
7.4. Cardputer-Adv (HY2.0-4P) Pin Mapping
| Cardputer-Adv | G8 | G9 |
|---|---|---|
| Cap LoRa-1262 (HY2.0-4P) | SDA | SCL |
7.5. HY2.0-4P Interface Pinout
| HY2.0-4P | Black | Red | Yellow | White |
|---|---|---|---|---|
| PORT.A | GND | 5V | SDA | SCL |
8. Schematics
For detailed circuit diagrams and component layouts, please refer to the official Cap LoRa-1262 Schematics PDF. This document provides comprehensive information for advanced users and developers.
Reference: Cap LoRa-1262 Schematics PDF
9. Software Development
The Cap LoRa 1262 module supports development on various platforms:
9.1. Arduino
- Cap LoRa-1262 Arduino Quick Start
- Cap LoRa-1262 Arduino LoRa Driver Library
- Cap LoRa-1262 Arduino GPS Driver Library
9.2. UiFlow2
- Cap LoRa-1262 UiFlow2 Docs
For detailed tutorials and documentation, visit the official M5Stack website:
10. User Tips
Based on user experiences, here are some helpful tips for using your Cap LoRa 1262 module:
- Meshtastic Compatibility: The module has been tested and confirmed to work with Meshtastic firmware.
- GPS Signal Reception: For optimal GPS performance, especially during initial cold starts, place the module near a window or outdoors to ensure a clear view of the sky. Indoor reception can be limited.
- Antenna Frequency: Verify that the included LoRa antenna's frequency (e.g., 868MHz) matches the regulatory requirements and common usage in your region. For example, users in the US might prefer a 915MHz antenna.
- Secure Connection: While the module fits tightly, some users have noted the absence of screws in the kit. Ensure the connection is firm, especially if the device will be subject to movement.
- Antenna Tuning: The antenna is generally well-tuned to its indicated frequency. Advanced users can verify this with a vector analyzer if needed.
- Cardputer ADV Integration: The module works seamlessly with the Cardputer ADV, enhancing its capabilities significantly.
- Fast GNSS Lock: Expect fast GNSS GPS connection and the ability to acquire signals from many satellites quickly.
11. Troubleshooting
- No GPS Signal Indoors: The built-in ceramic antenna for GNSS requires a clear line of sight to satellites. Move the device to an outdoor location or near a window for better signal acquisition.
- LoRa Communication Issues:
- Check Antenna: Ensure the LoRa rubber antenna is securely attached to the SMA connector.
- Frequency Mismatch: Confirm that the operating frequency of your LoRa setup (868-923 MHz) is appropriate for your region and that the antenna is tuned for that frequency.
- Range: LoRa range can be affected by obstacles and interference. Test in an open environment to determine maximum range.
- Module Not Recognized by Cardputer-Adv:
- Secure Connection: Ensure the module is firmly seated in the EXT 2.54-14P interface.
- Power Cycle: Try powering off and on the Cardputer-Adv after connecting the module.
- Firmware: Verify that your Cardputer-Adv firmware supports the Cap LoRa 1262 module.
12. Maintenance
To ensure the longevity and optimal performance of your M5Stack Cap LoRa 1262 module, follow these maintenance guidelines:
- Handle with Care: Avoid dropping or subjecting the module to excessive force, as this can damage internal components or connectors.
- Keep Dry: Protect the module from moisture and liquids. Water damage can lead to malfunctions.
- Clean Gently: If cleaning is necessary, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the module in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Antenna Care: Ensure the LoRa antenna is not bent or damaged, as this can impair communication performance.
13. Warranty and Support
For warranty information, technical support, and further assistance, please refer to the official M5Stack website or contact their customer service directly. Detailed documentation, including datasheets and software libraries, can be found on the M5Stack documentation portal.
Official M5Stack Website: https://m5stack.com/
Item Guides & Documents (PDF): User manual (PDF)
14. Video Resources
Watch the official product introduction and feature demonstration video for the M5Stack Cap LoRa 1262: