1. Introduction
The Diymore E27 Motion Sensor Light Socket is an intelligent adapter designed to transform any standard E27 bulb into a smart, motion-activated light. It features a built-in Passive Infrared (PIR) sensor for detecting movement and a light sensor for automatic day/night operation, promoting energy efficiency and hands-free illumination in various indoor spaces.
Figure 1: Automatic light activation with infrared human body sensor.
2. Safety Information
- Ensure the power supply is turned off before installation or maintenance to prevent electric shock.
- This device is designed for indoor use. Avoid exposure to water or high humidity.
- Do not exceed the maximum rated load of 60W for the E27 bulb.
- Use only with compatible E27 base bulbs (LED, CFL, incandescent, fluorescent).
- Do not disassemble or modify the device, as this may void the warranty and pose safety risks.
- Keep out of reach of children.
3. Package Contents
- 1 x Motion Sensor Light Socket (E27 Base)
- Note: Bulb not included.
4. Specifications
| Parameter | Value |
|---|---|
| Product Name | Wireless Human Body Induction Lamp Head E27 |
| Material | Flame Retardant ABS |
| Detection Angle | 360° |
| Load Power | 60W |
| Detection Distance | 6M Max (<24°C) |
| Operating Temperature | -20 ~ +40°C |
| Product Dimensions | 56 * 124mm (2.20in x 4.33in) |
| Installation Height | 2-3.5M |
| Operating Voltage | AC100-240V |
| Operating Frequency | 50/60Hz |
| Operating Humidity | < 93%RH |
| Adjustable Delay | 16S, 32S, 300S |
| Adjustable Light Control | Dark, Bright, All-day (3 adjustable ambient light levels) |
| Rated Load | < 60W Max. E27 (LED lamps, energy-saving lamps) |
| Installation Method | Simply screw the E27 screw head in and tighten. |
Figure 2: Product Dimensions.
5. Setup and Installation
The Diymore E27 Motion Sensor Light Socket offers tool-free installation, typically taking only 10 seconds. No wiring or drilling is required.
- Ensure the power to your existing E27 light fixture is turned OFF at the main switch.
- Carefully screw the motion sensor light socket into your existing E27 light fixture until it is securely tightened.
- Screw your desired E27 bulb (LED, CFL, incandescent, or fluorescent, max 60W) into the motion sensor light socket.
- Turn the power supply back ON. The light will activate based on the sensor settings.
Figure 3: E27 Screw-in Lamp Holder and Easy Installation.
Video 1: Product demonstration and installation guide.
6. Operating Instructions
The motion sensor light socket operates based on intelligent motion and day/night detection. It features adjustable settings for delay time and light sensitivity.
6.1 Motion Detection
The built-in PIR sensor detects moving objects (human/pet) within a range of 3-5 meters and a 360° detection angle. When motion is detected, the light will turn on. It will turn off automatically after a set delay if no further motion is detected.
6.2 Day/Night Detection (Light Sensitivity)
The integrated light sensor allows the socket to differentiate between day and night. It automatically turns off during the day to save energy and activates at night when ambient light levels are low.
6.3 Adjustable Settings
The sensor adjustment is customizable with switches located on the unit:
- Delay Settings: Set the duration the light remains on after motion is last detected. Options include 16 seconds, 32 seconds, and 300 seconds (5 minutes).
- Light Sensitivity Settings: Adjust the ambient light level at which the sensor becomes active. Options include 'Dark' (activates only in very low light), 'Bright' (activates in moderately low light), and 'All-day' (activates regardless of ambient light).
Figure 4: Delay Settings Switch.
Figure 5: Light Sensitivity Settings Switch.
7. Maintenance
- To clean the device, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the sensor lens is clear of dust and obstructions for optimal performance.
- Regularly check the bulb for proper function and replace it if necessary.
8. Troubleshooting
- Light does not turn on:
- Check if the power supply is on.
- Ensure the bulb is correctly installed and functional.
- Verify the light sensitivity setting. If set to 'Dark' or 'Bright', it may not activate in sufficient ambient light. Try 'All-day' for testing.
- Ensure no obstructions are blocking the motion sensor.
- Light stays on or turns off too quickly:
- Adjust the delay setting to your preferred duration (16s, 32s, or 300s).
- Check for constant motion within the detection range, which would keep the light activated.
- Ensure the light sensitivity setting is appropriate for the environment. If set to 'All-day', it will activate even in bright conditions.
- Motion sensor sensitivity seems low:
- Ensure the installation height is within the recommended 2-3.5m range.
- Clear any potential obstructions around the sensor.
- Consider the ambient temperature; detection distance can be affected by temperatures close to human body temperature.
9. User Tips
- The delay and light control modes generally function as expected, and the timing mechanism is relatively accurate.
- For optimal motion detection, ensure the sensor is installed at the recommended height and in an area free from large obstructions.
- Experiment with the 'Dark', 'Bright', and 'All-day' light control settings to find the best balance for your specific environment and desired energy savings.
10. Warranty and Support
For detailed warranty information, technical support, or further inquiries, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format may be available for download at this link.