HUANANZHI H311 VHD3

Contents

HUANANZHI H311 VHD3 Motherboard User Manual

Model: H311 VHD3 | Brand: HUANANZHI

1. Safety Precautions

Products may be damaged due to electrostatic discharge (ESD). Please follow these steps for successful computer assembly:

  • Ensure all components are firmly connected; loose connections can prevent component recognition or computer startup.
  • Before handling the motherboard, discharge body static by touching other metal objects to prevent ESD damage.
  • Hold the motherboard by its edges, avoiding sensitive components.
  • When not installed, place the motherboard in an anti-static container or on an anti-static pad.
  • Before turning on the computer, ensure all parts inside the case are firmly connected, with no loose screws or metal components.
  • Do not start the computer before installation is complete; otherwise, it may cause permanent damage to components or injury.
  • Before installing or disassembling any computer component, turn off the power and unplug the power cable from the socket.
  • Keep the motherboard away from moisture.
  • Keep this user manual for future reference.

2. Introduction and Features

The HUANANZHI H311 VHD3 is a Micro-ATX motherboard designed to support Intel LGA1151 platform processors (6th, 7th, 8th, and 9th generation Core, Celeron, and Pentium series). It features DDR3 memory support and an M.2 NVME slot for high-speed storage.

Key Features:

  • CPU Support: Intel LGA1151 6th/7th/8th/9th Gen Core/Celeron/Pentium processors.
  • Memory: 2 x DDR3 DIMM slots, supporting up to 16GB, 1866/1600/1333MHz Non-ECC, dual-channel architecture.
  • Storage: 4 x SATA 3.0 6Gbps ports, 1 x M.2 2280 NVME PCIE X4 2.0 slot.
  • Expansion Slots: 1 x PCI Express 3.0 x16, 1 x PCI Express 2.0 x1.
  • Rear I/O Ports: 1 x DP, 1 x VGA, 1 x HDMI, 2 x USB 3.2 Gen1, 2 x USB 2.0, 1 x Network (Gigabit), 1 x 3-hole Audio, 1 x PS/2 Keyboard/Mouse.
  • Front Panel Headers: 2 x USB 2.0, 1 x USB 3.2 Gen1, 1 x Front Audio, 1 x COM serial port, 1 x CMOS, 1 x SPK buzzer, 1 x Power-on/Restart, 1 x TPM (14-pin LPC).
  • Audio: Realtek ALC897 Audio Transcoder.
  • Network: Realtek RTL8111H Gigabit Ethernet.
  • Power: 24PIN + 8PIN.
  • Fan Headers: 1 x CPU_FAN (temperature control), 2 x SYS_FAN.
  • Form Factor: 215*170MM M-ATX.
  • BIOS: AMI UEFI BIOS.
  • Supported OS: Windows 10, Windows 11.

3. Package Contents

Please verify that all items are present and undamaged upon opening the package. If any items are missing or damaged, please contact your vendor.

  • 1 x HUANANZHI H311 VHD3 Motherboard
  • 1 x SATA Data Cable
  • 1 x I/O Shield Back Plate
  • 1 x Product Warranty Card

4. Motherboard Layout and I/O Panel

This section provides an overview of the motherboard's components and the rear I/O panel layout.

Detailed Motherboard Diagram with component labels
Figure 4.1: Detailed Motherboard Diagram with component labels including CPU socket, DDR3 slots, M.2 NVME slot, PCIe slots, and various headers.
Motherboard with key feature callouts and rear I/O diagram
Figure 4.2: Motherboard with key feature callouts and a diagram of the rear I/O ports.

Rear I/O Panel:

Close-up of the Rear I/O Ports
Figure 4.3: Close-up view of the Rear I/O Ports, showing PS/2, VGA, HDMI, DP, USB 3.2, USB 2.0, LAN, and Audio ports.
Detailed Rear I/O Panel Diagram
Figure 4.4: Detailed diagram of the Rear I/O Panel, labeling each port.

LAN Port Status Table:

Connection/Work Light StatusDescriptionSpeed Signal StatusDescription
OffNetwork Not ConnectedOffTransmission rate 10 Mbps
YellowNetwork ConnectedGreenTransmission rate 100 Mbps
FlickerNetwork In UseOrangeTransmission rate 1 Gbps

Audio Port Configuration:

  • Audio Input
  • Audio Output / Front Speaker Output
  • Microphone Input

5. Installation and Setup

Follow these instructions carefully for proper installation of components. Note that all pins marked with "1" or a white bold line on the motherboard diagrams indicate position "1".

5.1. CPU Installation

Motherboard with CPU socket and memory slots highlighted
Figure 5.1: Motherboard with CPU socket and memory slots highlighted.
  1. Carefully open the CPU socket retention arm.
  2. Align the CPU (LGA1151) with the socket. The golden triangle on the CPU indicates Pin1 and should match the corresponding mark on the socket.
  3. Gently place the CPU into the socket without forcing it.
  4. Close the retention arm to secure the CPU.

5.2. M.2 NVME Installation

  1. Locate the M.2 slot and the corresponding standoff screw.
  2. Remove the screw from the screw base and then remove the screw base itself.
  3. Tighten the screw base into the correct length hole for your M.2 module.
  4. Insert your M.2 module into the M.2 interface at a 30-degree angle.
  5. Gently push down the M.2 module and secure it with the screw on the trailing edge notch.

5.3. Memory Installation

  1. Open the clips on both ends of the DDR3 memory slot.
  2. Align the memory module with the slot, ensuring the notch on the module matches the key in the slot.
  3. Press down firmly on both ends of the memory module until the clips automatically snap into place.

5.4. Graphics Card Installation

  1. Remove the necessary expansion slot cover from your computer case.
  2. Open the latch on the PCIe x16 slot.
  3. Align your graphics card with the PCIe x16 slot and press it firmly until it is fully seated and the latch snaps back into place.
  4. Secure the graphics card to the chassis with screws.
  5. Connect any required PCIe power cables from your power supply to the graphics card.

5.5. Connecting Front Panel Headers

Refer to the motherboard diagram for exact locations. Ensure correct polarity for LED headers.

  • Front Audio Output Ports: Connect your case's front audio cable to the F_AUDIO header. Pinout includes MIC+, Ground, Vbias, AuD_Vcc(AVCC), LR_Out, R_Out Back, N.C, Key, LL_Out, L_Out Back.
  • USB Expansion Ports: Connect front USB 2.0 and USB 3.0 cables to the corresponding headers. USB 2.0 pinout includes VCC, D-, D+, GND, KEY, N.C. USB 3.0 pinout includes Power, USB3_RX_DN, USB3_RX_DP, Ground, USB3_TX_C_DN, USB3_TX_C_DP, USB2.0-, USB2.0+, GND, N.C.
  • F_PANEL1 Boot Interface: Connect case power button, reset button, HDD LED, and Power LED to this header. Pinout includes N.C, KEY, RESET, PWR_SW, HDD_LED-, PWR_LED-, HDD_LED+, PWR_LED+.

6. Driver Installation

After installing the operating system, install the necessary drivers for optimal performance.

6.1. Driver Directory Overview:

Driver DirectoryDriver DescriptionOperating System
H311-VHD3 Chipset DriverIntel Chipset Information InstallationWin7/Win10/Win11
H311-VHD3 Sound Card DriverRealtek Series Sound Card Driver InstallationWin7/Win10/Win11
H311-VHD3 LAN DriverRealtek Network Card Driver InstallationWin7/Win10/Win11

6.2. Intel Chipset Driver Installation:

  1. Navigate to Control Panel > System > Hardware > Device Manager.
  2. Right-click on the hardware device that needs the driver update.
  3. Select "Properties" > "Update driver" > "Browse my computer for driver software".
  4. Point to the directory containing the Intel chipset drivers (e.g., from the provided driver disk or downloaded package).
  5. Follow the on-screen prompts to complete the installation.

6.3. Audio Driver Installation (Realtek HD Audio):

  1. Before installation, identify the audio chip model on your motherboard.
  2. Run the installer executable, typically found at H311-VHD3/Audio/Realtek/windows10-11/Setup.exe.
  3. Click "Next" to proceed, then "Finish". The system will automatically restart to complete the installation.

6.4. Network Driver Installation (Realtek LAN):

  1. Run the installer executable, typically found at H311-VHD3 LAN/Win10_11/setup.exe.
  2. Click "Next" to proceed.
  3. Select "Install" and follow the on-screen prompts.
  4. After installation, select "Finish" and restart your computer. The system will automatically detect and configure the network device.

6.5. External Video Card Driver Installation:

  1. After installing your external graphics card, download the latest drivers from the graphics card manufacturer's official website.
  2. Run the driver installer (e.g., Setup.exe).
  3. Follow the on-screen instructions, clicking "Next" and confirming any prompts.
  4. Restart your computer after installation is complete.

7. BIOS Settings

The BIOS (Basic Input/Output System) is firmware that controls the basic functions of your computer. CMOS SETUP stores various configuration data. To enter the AMI BIOS CMOS SETUP utility, press the Delete or Del key during the Power On Self Test (POST) when the computer starts up. The warm boot key is F7.

Menu items with a triangle symbol indicate a sub-menu, which will pop up when selected.

7.1. Main Menu Functions:

  • Main: Displays system information such as date, time, HDD specifications, and monitor type settings.
  • Advanced: Provides advanced BIOS features and special function settings, including virus alerts and boot disk priority.
  • Chipset: Configures advanced chipset settings.
  • Boot: Manages boot settings, including boot device order.
  • Security: Allows setting BIOS passwords for enhanced system security.
  • Save: Saves the current BIOS configuration changes.
  • Exit: Provides options to exit the BIOS, including loading optimized defaults, loading fail-safe defaults, discarding changes, or exiting without saving.

8. Troubleshooting

If you encounter issues, try the following common troubleshooting steps:

  • No Display: Check power connections to the motherboard, graphics card, and monitor. Ensure the monitor cable is securely connected. Re-seat the graphics card and memory modules.
  • System Won't Boot: Verify that the CPU, RAM, and all power connections are correctly installed. Check for any loose screws or metal components inside the case that might be causing a short circuit.
  • Driver Issues: Ensure you have installed the correct drivers for your operating system. If problems persist, try reinstalling the drivers.
  • System Instability/Crashes: Check for overheating by monitoring CPU and GPU temperatures. Ensure proper ventilation in your case. Verify that all components are compatible with each other.
  • Peripheral Not Detected: Ensure the peripheral is properly connected to the correct port. Check device manager for any driver conflicts or missing drivers.

9. User Tips

  • Always ensure your power supply unit (PSU) has sufficient wattage for all your components, especially if using a dedicated graphics card.
  • When installing memory, ensure both modules are of the same type and speed for optimal dual-channel performance.
  • Regularly clean your computer's interior to prevent dust buildup, which can lead to overheating and reduced performance.
  • Keep your BIOS firmware updated to ensure compatibility with new hardware and to benefit from performance improvements and bug fixes.
  • For best performance, install your operating system on an M.2 NVME SSD if possible.

10. Specifications

FeatureSpecification
Motherboard ModelH311 VHD3
ChipsetIntel 100 Series
CPU SocketLGA1151 (Supports Intel 6th/7th/8th/9th Gen Core/Pentium/Celeron)
Memory Slots2 x DDR3 DIMM
Max. RAM Capacity16GB
Memory StandardDDR3 1866/1600/1333MHz Non-ECC (Dual-Channel)
Storage Interface4 x SATA 3.0 6Gbps, 1 x M.2 2280 NVME PCIE X4 2.0
PCI Express Slots1 x PCI Express 3.0 x16, 1 x PCI Express 2.0 x1
Onboard Sound CardRealtek High Definition Audio ALC897
Onboard Network CardGigabit Network Card RTL8111H
Rear I/O Ports2 x USB 3.2 Gen1, 2 x USB 2.0, 1 x VGA, 1 x HDMI, 1 x DP, 1 x Network, 1 x 3-hole Audio, 1 x PS/2 Keyboard/Mouse
Front Panel Interface2 x USB 2.0 pins, 1 x USB 3.2 Gen1 pins, 1 x Front Audio pins, 1 x COM serial port pins, 1 x CMOS pins, 1 x SPK buzzer pins, 1 x Power-on/Restart pins, 1 x TPM pins (14-pin LPC)
Power Interface24PIN + 8PIN
Fan Pins1 x CPU_FAN (temperature control), 2 x SYS_FAN
Power Supply Phases6-phase
PCB Layers4 layers
Motherboard Dimensions215*170MM (M-ATX)
BIOSAMI UEFI BIOS
Supported SystemsWindows 10, Windows 11

11. Warranty and Support

For specific warranty terms and conditions, please refer to the product warranty card included in your package.

If you require technical assistance or have questions regarding your HUANANZHI H311 VHD3 Motherboard, please contact HUANANZHI after-sales customer service or send an email to business@huananzhi.com. Please provide your product model and a detailed description of your issue for efficient support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.