OPUYYM Android15 Car Radio Multimedia Player for Toyota Aqua Prius C

Contents

OPUYYM Android Car Radio Multimedia Player User Manual

For Toyota Aqua Prius C (2011-2017)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your OPUYYM Android Car Radio Multimedia Player. Please read this manual thoroughly before using the device to ensure proper functionality and to familiarize yourself with its features.

This device is designed for Toyota Aqua Prius C models manufactured between 2011 and 2017. It features an Android 15 operating system, a 9-inch QLED display, built-in GPS, Wireless Carplay, Android Auto, DSP, Wi-Fi, and Bluetooth connectivity.

OPUYYM Android 15 Car Radio Multimedia Player for Toyota Aqua Prius C
Product overview: Android 15 car radio with 9-inch QLED screen, highlighting Wireless Carplay, Auto, DSP, WIFI, and BT.

2. Setup

2.1 Package Contents

Before installation, please verify that all components are present:

  • Android Car Radio Multimedia Player
  • Power Harness
  • GPS Antenna
  • USB Cables
  • User Manual (PDF available: View PDF)
  • Optional: AHD Camera, Installation Tools, Microphone (depending on purchased variant)
Features and included gifts for the car radio
Summary of features and potential included accessories like AHD Camera and tools.

2.2 Installation Notes

Professional installation is recommended. Ensure the vehicle's power is disconnected before beginning installation.

Canbus Module: For certain vehicle configurations (e.g., connection 'A' in the diagram), a Canbus module may be required for full functionality. This module is typically an optional purchase.

Canbus module requirement for car radio installation
Diagram showing car wiring connections (A and B) and a note about the optional Canbus module.

2.3 Initial Power On & Boot LOGO Settings

After successful installation, turn on your vehicle's ignition. The device should power on automatically.

To customize the boot logo:

  1. Navigate to Settings > Factory Setting > Car Logo Setting. You can select from pre-installed car logos.
  2. To use a custom boot logo: The image resolution must be at least 1024x600 pixels. Create a folder named 'mycar' in the root directory of an SD card or USB drive. Place your custom image file(s) in this folder. Insert the SD card/USB drive into the unit. In the 'Car Logo Setting' menu, slide to the last page to find and select your custom logo.

3. Operating Instructions

3.1 Basic Operation Gesture Recognition

The device supports various touch gestures for interaction:

  • Short-press (Tap): Select items, activate functions.
  • Long-press: Access context menus, initiate drag-and-drop.
  • Drag: Move icons or elements.
  • Slide (Swipe): Navigate between screens (left/right) or scroll content (up/down).

3.2 Main Interface and Application Interface

Upon startup, the device defaults to the main menu page, displaying shortcuts to frequently used functions. You can customize the layout by long-pressing on blank space to add widgets or shortcuts. Swipe left or right to switch between multiple screens. Tap the home icon [Home Icon] to return to the main interface from any application.

Tap the application icon [App Drawer Icon] on the main interface to access the full application list.

3.3 Wallpaper Replacement

To change the wallpaper:

  1. Long-press on a blank area of the main interface to open wallpaper settings.
  2. Alternatively, go to Settings > Devices > Display > Wallpaper and choose from available options.

3.4 Adding/Deleting Application Shortcuts

  • Add Shortcut: From the application interface, long-press an app icon. The device will enter a draggable state and switch to the main menu. Drag the icon to your desired position.
  • Delete Shortcut: Long-press an app icon or widget on the main menu. A delete button [X Icon] will appear. Drag the icon to the delete button until it turns red, then release to remove the shortcut.

3.5 Navigation Function

Click the navigation icon [Navigation Icon] on the main interface to enter the map interface. Tap to search for destinations and start navigation. The device supports various navigation systems like GPS, Glonass, and Beidou, and applications such as Sygic, Waze, and Google Maps.

Car radio displaying navigation map
Installed unit showing a navigation map.

3.6 Bluetooth Function

Click the Bluetooth icon [Bluetooth Icon] on the main interface to access Bluetooth features.

3.6.1 Bluetooth Phone

To use the Bluetooth phone function, connect your mobile phone to the car radio:

  1. Enable Bluetooth on both your mobile phone and the car radio. Set your phone to be 'visible to everyone'.
  2. On your phone, search for Bluetooth devices and select the car radio. The default pairing password is usually '0000'.
  3. Once connected, the Bluetooth phone function is ready for use.

3.6.2 Bluetooth Call Record

In the Bluetooth interface, click the call record icon [Call Record Icon] to view incoming, outgoing, and missed calls. Records are arranged by dialing time, with the most recent at the top. You can delete records from this interface.

3.6.3 Bluetooth Sync Phone Address Book

Click the sync icon [Sync Icon] in the Bluetooth interface to synchronize your phone's address book:

  1. Click the download icon [Download Icon]. Your phone will prompt you to allow access to the address book.
  2. After the download is complete, click the save button.
  3. Use the search icon [Search Icon] to find contacts.
  4. To delete a contact, click the delete button [Delete Icon].

3.6.4 Bluetooth Music

Click the music icon [Music Icon] in the Bluetooth interface. When your phone is connected via Bluetooth, you can play music from your phone through the car's speakers and control playback (next/previous song).

3.6.5 Bluetooth Device Search & Settings

In the Bluetooth interface, click the device search icon [Device Search Icon], then the search button [Search Button] to find nearby Bluetooth devices. Select a device and click connect [Connect Icon]. To disconnect, click the disconnect icon [Disconnect Icon]. To clear a device, click the clear device icon [Clear Device Icon].

Click the settings icon [Settings Icon] to adjust Bluetooth settings, including the car's Bluetooth name and pairing password.

3.7 Application Interface

Tap the application icon [App Drawer Icon] on the main interface to view and launch all installed applications.

Car radio displaying application icons
Installed unit showing a grid of application icons.

3.8 Video Playback

Click the video icon [Video Icon] to enter the video playback interface. The player supports various formats (3gp, mp4, m4v, flv, f4v, mkv, webm, avi) and high-definition video playback. It can identify video resources from both internal and external storage.

To view the video list, click the list icon [List Icon]. You can switch between video lists and video folders by selecting the storage device type.

3.9 Music Player

Access the music player via its icon on the main or application interface. If no playback history exists, it will default to the list interface.

  • Song List Button: Displays all songs from internal and external storage.
  • Folder List Button: Displays all folders containing songs from internal and external storage.

In the play interface, you can control playback (play/pause, next/previous) and drag the progress bar for fast forward/rewind.

3.10 File Management

The file manager allows you to view and operate all files. File directories are listed on the left. To copy or move files, select the desired file(s), and operation buttons will appear at the bottom. Select the target directory and click the corresponding operation.

3.11 Picture Preview

The picture browsing function allows viewing of all image formats from internal and external storage. You can also set any picture as wallpaper.

In browsing mode, you can zoom in/out, move pictures with your finger, and switch between pictures using gestures. Long-pressing the screen will hide/show function buttons.

3.12 Steering Wheel Learning

If your vehicle has steering wheel buttons that support learning, you can customize their functions:

  1. Press and hold the button on the steering wheel you wish to program.
  2. On the car radio screen, select the function button you want to assign. Release the steering wheel button only when a valid resistance value appears below the on-screen button.
  3. Repeat for other buttons. Click the save button after learning.

3.13 Touchscreen Assistant

The floating button of the touchscreen assistant provides shortcuts for various operations. To display it, enter the touchscreen assistant settings and enable the 'Display button' option.

You can configure the floating button to start automatically on boot. The size of the floating button can also be adjusted in the settings.

3.14 System Settings Overview

Access the main settings menu by clicking the settings icon [Settings Icon]. Key settings include:

  • Wi-Fi: Connect to Wi-Fi networks, view data usage, and configure hotspot/network sharing.
  • Device: Adjust display (brightness, wallpaper, auto black screen), sound (equalizer, LOUD, power amplifier), GPS information, storage usage, and app permissions.
  • General: Configure basic attributes like 'Press any key to start', 'Brake wire for video in motion', 'Auto-start navigation', 'OSD time', 'Mirror view on reverse image', 'Mute audio when reversing', 'Sound reduction when reversing', 'Backlight control', and 'Default volume switch'.
  • User: Location settings (GPS satellite positioning), security (app permissions, password display), language and input, and backup/reset options.
  • System: Set date and time, and view basic information about applications and the system.

4. Specifications

Feature Specification
Brand NameOPUYYM
Operating SystemAndroid
Display Size9 inches
Display Resolution2000*1200P (QLED)
RAM Options4GB, 8GB, 12GB
ROM Options32GB, 64GB, 128GB, 256GB
ProcessorOcta-core, up to 2.0GHz
GPUAdreno 610
Max External Memory256G
TF/Micro SD Slot1
Voltage12 V
Din TypeOne Din
Touch ScreenYes
Built-in ScreenYes
Built-in DVD PlayerNo
Special FeaturesWi-Fi function, Steering Wheel Control, Built-In Speaker/Microphone, Can-Bus Support, 3G/4G Network Support, MP3 players, Split Screen, Android Auto, DSP, Reversing Input, Mobile Phone Connectivity, CarPlay, Built-in GPS, Charger
Digital Media FormatJPEG, MP4, Mp3, WMA
OSD Language SupportMulti-language support including English, Vietnamese, Indonesian, Arabic, Japanese, Spanish, French, Russian, German, etc.
CertificationCE
Package Dimensions33cm (L) x 27cm (W) x 11cm (H)
Package Weight2.0 kg
Detailed hardware specifications of the car radio
Infographic detailing hardware specifications including RAM, ROM, CPU, GPU, and display type.
Multimedia and connectivity features of the car radio
Infographic showcasing multimedia features, GPS, Bluetooth, CarPlay, Android Auto, and app support.

5. Troubleshooting & FAQ

5.1 Common Issues and Solutions

  • Bluetooth pairing/connection failure:

    Turn off and then on your phone's Bluetooth, then search and connect again. If the issue persists, reset the car radio's Bluetooth settings and try pairing again.

  • No sound from Bluetooth music:

    Ensure your paired mobile phone has its volume output enabled and turned up.

  • Phone book download unresponsive:

    After Bluetooth connection, when you click to download the phone book, your mobile phone should receive a request. Confirm and allow this request on your phone to proceed with the download.

  • Bluetooth name not updated after setting:

    If the Bluetooth name doesn't update immediately, disconnect Bluetooth, then reconnect and pair again.

  • SD card or USB music player not updating data:

    After inserting a storage device, the music player scans for data. If the data is large, it may take up to a minute to update. If it still doesn't update, ensure the storage device is properly mounted. Check the file browser for the corresponding directory. If not present, re-plug the card/USB or check the hardware connection.

  • Song file names show garbled code:

    This usually occurs if the song's encoding method is not a common format or does not match the local language settings. The device displays the file name, not necessarily the embedded song title metadata.

5.2 Factory Settings

The factory settings allow configuration of machine functions. Accessing these settings requires a pairing password. It is generally not recommended to change factory settings to ensure normal operation of the device.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the display and exterior. Avoid abrasive cleaners or solvents.
  • Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Follow instructions provided by the manufacturer for updates.
  • Environmental Conditions: Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

7. User Tips

  • Users have reported excellent sound quality and responsive performance, especially with wireless Android Auto and Apple CarPlay.
  • The interface is generally intuitive and visually appealing.
  • Installation is often straightforward, but ensure all connections are secure, especially for optional modules like Canbus.

8. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for download: View PDF.

© 2023 OPUYYM. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.