1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your REEIIO Wireless CarPlay and Android Auto Interface. Please read this manual thoroughly before installation and use to ensure proper functionality and to maximize your experience.
The product has undergone strict testing before leaving the factory. Most issues are related to incorrect settings or installation. Damage during transportation can also occur. If you encounter any problems, please contact support with your car model and production year for assistance.
2. Product Overview
Key Features
- Wireless/Wired Android Auto
- Wireless/Wired CarPlay
- Seamless switching between factory menu and CarPlay/Android Auto
- Compatibility with OEM and aftermarket cameras
- GPS navigation with mobile apps (Apple Maps, Google Maps, Waze) and real-time traffic notifications
- Hands-free calling and voice assistant support (Siri, Google Voice Assistant)
- Dynamic parking guidance (active grid lines based on steering wheel position, on certain models)
- Full integration with original car knob, button controls, and steering wheel controls
- High-quality audio output via the car's original Bluetooth audio system (dual-channel Bluetooth)
- Mirroring function for iPhone and Android phones (wired & wireless)
- USB Video Playback (direct U disk insertion for video and audio media)
Compatible Vehicles
This interface is designed for Mercedes Benz V-Class W447 models from 2014-2018 with NTG5.0/5.1 systems.
Please verify your car's system (NTG 5.0) and model year before installation. If unsure, contact support.
Product Components
The package includes the main adapter unit and various cables for connection:
- Adapter Unit: Size approximately 140mm x 105mm x 25mm.
- Power Cable: For connecting the interface to the car's power supply.
- LVDS Cable: For video signal transmission.
- RCA/USB Cables: For audio/video input and USB connectivity.
- WiFi Antenna & Bluetooth Antenna: For wireless connectivity.
3. Setup Instructions
3.1. DIP Switch Settings
The adapter unit features DIP switches that must be configured according to your car's screen size. The DIP switches are located on the side of the main adapter unit, typically near the USB and video ports.
Configuration for different screen sizes:
- For 7 / 8.4 inch Screen (800x480 resolution):
Set DIP switches as follows: Switches 1, 2, 3, 4, 5, 6, 7, 8. Specific ON/OFF positions are crucial. (Refer to the original manual's 'step1' diagram for exact settings).
- For 8.4 inch Screen (960x540 resolution):
Set DIP switches as follows: Switches 1, 2, 3, 4, 5, 6, 7, 8. (Refer to the original manual's 'setup2' diagram for exact settings).
- For 12.3 inch Screen (1440x540 resolution):
Set DIP switches as follows: Switches 1, 2, 3, 4, 5, 6, 7, 8. (Refer to the original manual's 'setup3' diagram for exact settings).
Important: Incorrect DIP switch settings can lead to display issues. Always ensure the settings match your car's screen specifications.
3.2. Cable Connections (NTG5.0 Wiring Diagram)
Follow the wiring diagram carefully for proper installation. This involves connecting the power, video, and audio cables to the car's original system and the new interface.
Key connections include:
- MIC OUT: Use the original OEM microphone.
- Power Cables: Connect the new power cable to the interface and the car's power supply.
- LVDS Cables: Connect the original LVDS cable from the screen to the interface, and then a new LVDS cable from the interface to the OEM radio.
- AUX OUT: Reserve AUX OUT connection.
- WiFi Antenna: Connect the WiFi antenna and ensure it is kept away from metal objects for optimal signal.
- Noise Reduction: If noise is present, try unplugging a specific wire (refer to the detailed diagram in the original PDF manual, page 8, for identification).
Note: A detailed wiring diagram is available in the original PDF manual (page 8). It is highly recommended to consult this diagram for precise connections.
3.3. Transfer Fiber Cables
If your car has a fiber optic cable, you must transfer it from the original car's power cable to the new power cable provided with the interface.
- Unplug the optical cable from the original car's power cable.
- Transfer this optical cable to the new power cable provided.
Important: This device will only work after the vehicle is started (ignition on).
3.4. WiFi Antenna and USB-AV Cable Connection
Connect the WiFi antenna and the USB-AV cable as shown in the diagram (refer to original PDF manual, page 9). The USB-AV cable typically includes connections for MIC IN, CEACE, and AA (audio/video inputs).
4. Operating Instructions
4.1. Original Car Button Description
The CarPlay interface decoder box supports the following original car controls:
- Voice Control Button: For activating Siri or Google Voice Assistant.
- Telephone Button: For answering/ending calls.
- Next/Previous Song Buttons: For media control.
- Volume +/- Buttons: For audio level adjustment.
Other buttons on the steering wheel or central console may not be supported by the interface.
Switching Systems: Press and hold the back button on your car's controls for three seconds to switch between the original car system and the CarPlay/Android Auto interface.
4.2. Wireless CarPlay Connection
- Step 1: On the interface's SmartPhone Setting menu, turn on "CarPlay".
- Step 2: On your phone, go to Bluetooth settings and check for a Bluetooth device named "CAR-xxxx".
- Step 3: Turn on your phone's Wi-Fi and keep it on. Then, return to Bluetooth settings to connect to the CarPlay device.
- Step 4: Select the Bluetooth device name "CAR-XXX" (e.g., CAR-5eba) and pair it. A request window will pop up; confirm to use CarPlay.
4.3. Wireless Android Auto Connection
- Step 1: On the interface's SmartPhone Setting menu, turn on "AndroidAuto".
- Step 2: On your phone, go to Bluetooth settings and check for a Bluetooth device name starting with "CAR-xxx".
- Step 3: Click on the Bluetooth name beginning with "CAR-xxx" (e.g., CAR-5eba). An pairing request will pop up; click "Pairing".
- Step 4: After successful Bluetooth pairing, turn on the Android Auto app on your mobile phone. The system will connect automatically.
4.4. Wireless Airplay Connection
- Step 1: On the interface's SmartPhone Setting menu, turn on "AirPlay".
- Step 2: On your iPhone, go to Wi-Fi settings. The search bar will show "CAR-WIFI-XXX". Click to connect. The password is 6668888.
- Step 3: After successful Wi-Fi connection, return to your iPhone's main interface. Open the Shortcut menu page and select "Screen Mirroring" to turn it on.
- Step 4: Once "Screen Mirroring" is on, select "AirPlay" to complete the wireless screen mirroring.
4.5. Audio Settings
This product supports two sound modes: Bluetooth audio and Bluetooth transmission.
4.5.1. Bluetooth Audio Settings
- Step 1: On the interface, navigate to Settings > System. Turn on "Use Car's BT Channel" to activate the Bluetooth function.
- Step 2: After connecting CarPlay/Android Auto, use the original car's Bluetooth to search for and connect to your phone's Bluetooth.
4.5.2. Bluetooth Transmission Settings
- Step 1: On the interface, navigate to Settings > System. Turn off "Use Car's BT Channel".
- Step 2: After connecting CarPlay/Android Auto, use the original car's Bluetooth to search for and connect to the device's Bluetooth (the name may be BT-Transmitter).
Note:
- The module has two Bluetooth connections: one BT-transmitter for Bluetooth audio, and one "CAR-XXX" Bluetooth for CarPlay/Android Auto connection only (not for Bluetooth audio).
- You cannot use your mobile phone to connect to the module's BT-Transmission directly.
- Bluetooth audio and Bluetooth transmission cannot be used simultaneously.
- Airplay/AutoLink USB playback does not support Bluetooth audio; it only supports Bluetooth transmission.
5. Maintenance
The REEIIO Wireless CarPlay and Android Auto Interface is designed for durability and reliable performance. To ensure its longevity, follow these general maintenance guidelines:
- Keep the unit clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Ensure all cable connections are secure and free from strain.
- Do not attempt to open or modify the unit, as this will void the warranty and may cause damage.
6. Troubleshooting
6.1. WiFi Disconnection Issues
If CarPlay/Android Auto frequently disconnects and returns to the menu screen, it may be due to frequency interference. To resolve this:
- Go to the interface's menu screen.
- Navigate to WiFi Settings.
- Change the WiFi signal channel to 48 or 161.
6.2. Call Echo Cancellation
If you experience an echo during phone calls:
- Go to Settings > Audio > AE Delay.
- Keep the car quiet (no background noise).
- Set the volume to a moderate position.
- Click the "Start Auto AEC" button.
- Wait approximately 20 seconds for the estimation to complete.
6.3. Reversing Camera Issues
If the reversing camera is not working correctly:
- Check Connections:
- Connect the 12V camera power (Pink cable) to the camera.
- Connect the yellow RCA rear camera video connector to the camera.
- For manual transmission models, you may need to connect the reverse light 12V extension to the rear lights and then to the BACK cable of the module.
- Adjust CVBS Signal Mode: If issues persist, try changing the CVBS signal mode.
- Go to the module's settings: Car Settings > Reverse Settings.
- Change the CVBS signal mode (e.g., from SD NTSC to SD PAL, AHD 720p@30, or AHD 720p@25).
6.4. System Firmware Upgrade
Firmware upgrades are generally not recommended unless you are experiencing specific problems that can be resolved by an update. If advised by customer service:
- Unzip the firmware file to the root directory of a USB flash drive.
- Insert the USB flash drive into the USB port of the product.
- Navigate to Module Settings > System > Firmware Upgrade to perform a manual upgrade.
Reset System: To reset the system to factory defaults, go to Module Settings > System > Factory Reset. Confirm the action to erase all data and reboot.
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | Wireless CarPlay and Android Auto Interface |
| Brand | REEIIO |
| Compatibility | Mercedes Benz V-Class W447 (2014-2018) with NTG5.0/5.1 systems |
| Main Adapter Dimensions | Approx. 140mm (L) x 105mm (W) x 25mm (H) |
| Package Weight | 0.866 kg |
| Package Dimensions | 25cm (L) x 21cm (W) x 7cm (H) |
| Connectivity | Wireless/Wired CarPlay, Wireless/Wired Android Auto, AirPlay, Mirrorlink, Bluetooth, WiFi, USB |
| Audio Output | Via car's original Bluetooth audio system |
| Control Integration | Steering wheel buttons, original car knob, touch screen |
8. User Tips
- Compatibility Check: Always double-check your car's model year and NTG system version (e.g., NTG5.0) to ensure full compatibility before installation. If your car is a newer model (e.g., 2019 W447), confirm with support as the listed compatibility is for 2014-2018.
- Optimal WiFi Signal: For stable wireless CarPlay/Android Auto, ensure the WiFi antenna is positioned away from metal obstructions. If disconnections occur, try changing the WiFi channel in settings.
- Voice Commands: Utilize your car's original voice control button to activate Siri or Google Voice Assistant for hands-free operation of navigation, music, and calls.
9. Frequently Asked Questions (FAQ)
- Q: Is this interface compatible with a Mercedes W447 from 2019 with NTG 5 and DAB radio?
- A: The product is officially listed as compatible with Mercedes Benz V-Class W447 models from 2014-2018 with NTG5.0/5.1 systems. For 2019 models, it is recommended to contact customer support to confirm compatibility, as there might be slight variations in newer vehicle systems.
- Q: What should I do if I experience an echo during phone calls?
- A: Navigate to Settings > Audio > AE Delay on the interface. Ensure the car is quiet, set the volume to a moderate level, and then press "Start Auto AEC". Wait for about 20 seconds for the process to complete.
- Q: My wireless CarPlay/Android Auto keeps disconnecting. How can I fix this?
- A: This issue is often caused by frequency interference. Try changing the WiFi signal channel in the interface's WiFi Settings menu to either 48 or 161.
10. Warranty and Support
Your REEIIO Wireless CarPlay and Android Auto Interface is designed for reliable performance. For any issues or support needs, please contact us through the following channels:
- Contact via Historical Orders: Reach out to us directly through your purchase history on the platform.
- Email Support: support@autoabc.shop
- WhatsApp Support: +86 13798355286 (Due to time differences, video calls may require advance booking).
Our services include after-sales installation guidance, product setup and upgrading, and assistance with exchanges or returns. We aim to respond to all inquiries promptly, typically within one hour during our operating hours (UTC+8), though response times may vary due to time differences.
For a multilingual version of this manual, please refer to the QR code provided in the original PDF manual (page 3).
For car dashboard removal guidance videos, please refer to the QR code provided in the original PDF manual (page 4).