ATOPCARE PR903W

Contents

PR903W Solar Powered Hunting Camera User Manual

Model: PR903W

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your PR903W Solar Powered Hunting Camera. Designed for wildlife observation, security monitoring, and time-lapse photography, this camera features 8K video recording, 60MP image capture, and integrated solar power for extended use. Please read this manual thoroughly before using the camera to ensure optimal performance and longevity.

Front view of the PR903W Solar Powered Hunting Camera

Front view of the PR903W Solar Powered Hunting Camera.

2. Safety Warnings

  • Do not expose the camera to extreme temperatures or direct sunlight for prolonged periods without proper ventilation.
  • Keep the camera away from strong magnetic fields.
  • Use only recommended batteries and power sources.
  • Do not attempt to disassemble or modify the camera, as this will void the warranty and may cause damage.
  • Ensure the camera is securely mounted to prevent it from falling and causing injury or damage.
  • Keep out of reach of children.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.

  • PR903W Solar Powered Hunting Camera
  • USB Cable
  • Mounting Strap
  • User Manual (this document)

Note: Memory card and AA batteries are NOT included and must be purchased separately.

Contents of the camera package, including the camera, user manual, USB cables, and mounting strap.

Package contents: Camera, user manual, USB cables, and mounting strap.

4. Camera Overview

Familiarize yourself with the camera's components and controls:

Detailed product analysis diagram labeling the solar energy panel, lens, PIR sensor, 2.0 inch display screen, lock hole, menu buttons, shot button, power switch, USB port, TF card slot, mode button, OK button, and battery box.

Detailed view of the camera components.

  1. 2.0" LCD Display Screen
  2. Power Switch (OFF-TEST-ON)
  3. USB Slot
  4. SD card slot
  5. DC 6V interface
  6. Battery Box
  7. Solar panel
  8. Lens
  9. PIR Sensor
  10. Lock Hole
  11. MENU Button
  12. SHOT Button
  13. MODE Button
  14. OK Button

Operation Keys (in TEST/SETUP mode)

Key/Switch Position Function
OFF Power off
TEST Screen lights up, allows setting menu, parameters, mode, etc.
ON After 5 seconds, the screen goes off, and the camera enters infrared sensor mode for recording.
MENU Enters camera settings menu to configure functions and parameters.
SHOT Manually take a photo or record a video.
MODE Manually switch between photo, video, and replay modes.
OK Confirm button for selections.

5. Initial Setup

5.1. Preparation Before Use

  1. Format the SD Card: Insert an SD card (up to 128GB, not included) into the SD card slot. It is crucial to format the SD card before first use.
  2. Power Supply: The camera offers three power options:
    • Integrated Solar Panel: The camera features a 5200mAh high-capacity battery charged by the solar panel. It also supports charging via a Type-C cable.
    • AA Batteries: For extended standby time, install 8 x 1.5V AA alkaline batteries (not included) into the battery box, ensuring correct polarity. The camera will use AA batteries only when the solar panel's battery is exhausted.
    • DC 6V Cable: You can power the camera directly using a 6V DC cable (included). Note that if there is no built-in battery, the camera will turn off when unplugged.
  3. Remove Protective Film: To ensure optimal shooting effect, remove the protective film from the camera's PIR sensor and lens.

5.2. Quick Start Guide

  1. Switch to TEST Mode: Move the power switch to the "TEST" position. The screen will light up.
  2. Access Settings: Press the "MENU" button to enter the camera settings.
  3. Format SD Card: Navigate to "Memory Card Format" and select "YES" to format the SD card.
  4. Activate Camera: Move the power switch to the "ON" position. The camera will enter motion detection mode. After about 10 seconds, the screen will turn off, and the camera will begin working. It will automatically take photos/videos when motion is detected and save them to the SD card.
Interior view of the camera, showing the 2.0 inch LCD display, control buttons (MENU, SHOT, MODE, OK), and ports (OFF-TEST-ON switch, USB, SD card slot).

Camera interior with display and controls.

6. App Connection (TrailCam Go Mobile APP)

The camera can be controlled and managed via the TrailCam Go mobile application, available for both iOS and Android devices. The camera creates its own Wi-Fi hotspot for direct connection to your phone, it does not connect to your home Wi-Fi network for internet access.

6.1. Download the App

Scan the QR codes below or search for "TrailCam Go" in your device's app store:

QR code for Android app download

Android

QR code for iOS app download

iOS

6.2. Enable Wi-Fi and Bluetooth

Before launching the TrailCam Go app, ensure both Wi-Fi and Bluetooth are enabled on your mobile phone. This is crucial for optimizing the connection speed between the app and the camera.

6.3. Adding a Camera

  1. Open the TrailCam Go app.
  2. Tap on "Add Camera" or the '+' icon.
  3. Choose "Wi-Fi Camera" as the device type.
  4. Stay close to the camera (within 45ft) for a stable connection and avoid excessive electronic interference.
  5. The app will search for nearby Wi-Fi tracking cameras. Select your camera from the list. The camera's Wi-Fi name will typically start with "TrailCam" followed by an identifier.
  6. The app will establish a Bluetooth and Wi-Fi connection. You may be prompted to "Join" the camera's Wi-Fi network.

6.4. App Navigation & Features

  • Camera: Provides a live view from the camera and allows manual photo/video capture, saving directly to your phone.
  • Gallery: View photos and videos stored on the camera's SD card. You can download them to your phone's album.
  • Status: Displays important information such as battery life, SD card capacity, camera internal temperature, and current operating mode.
  • Settings: Modify various camera settings, which will automatically sync to the camera.

6.5. Disconnect and Reconnect

If you need to use your phone's internet or perform other tasks, you can disconnect from the camera within the app. To reconnect, go to the "Camera" section in the app and tap "connect camera."

6.6. App Password & Account Registration

You can configure a 4-digit passcode for the camera and app via Camera > Settings > Security. For enhanced security of captured content, it is recommended to register an account after binding the device to the app.

7. Operating Modes

Access these modes via the "MENU" button in TEST mode.

7.1. Motion Detection Mode

  • The camera records only when motion is detected. If no motion, it enters standby.
  • Detection Delay: Sets the interval between motion detections (e.g., 30s means it will re-enable motion detection every 30 seconds after the first sensing). Adjustable from 5 seconds to 1 hour.

7.2. Time-lapse Normal Mode

  • The camera shoots continuously at set intervals, regardless of motion. Each video is saved separately.
  • Example: Capture interval 5 minutes, video length 15 seconds means a 15-second video every 5 minutes.

7.3. Time-lapse Video Mode

  • The camera takes multiple photos at set intervals and automatically combines them into a video. Records up to 360 photos per time-lapse video.
  • If a time-lapse video doesn't reach 360 photos, subsequent recordings will be appended to the previous file.
  • New files are created if: video resolution is switched, mode is changed from time-lapse video, or 360 photos have been recorded.
  • Example: Capture interval 10 minutes, working time 5:00-7:00. Pictures taken within these two hours are combined into one video.

8. Camera Settings

All settings can be adjusted via the MENU button in TEST mode or through the TrailCam Go app.

  • Work Time (Off/ON): Customize the camera's operating hours. E.g., ON from 22:00 to 07:00.
  • Photo or Video (Photo, Video, Photo & Video): Select the desired capture mode.
  • Photo Resolution: Options include 2M, 4M, 8M, 16M, 20M, 24M, 32M, 36M, 42M, 48M, 60M.
  • Video Resolution: Options include 720P, 1080P, 2.7K, 4K, 8K.
  • Photo Burst: Set the number of images taken per trigger (1P, 2P, 3P, 4P, 5P).
  • Video Length: Default 10 seconds, adjustable from 5 seconds to 10 minutes.
  • Audio Recording (ON/OFF): Enable or disable video sound recording.
  • PIR Sensitivity (Low, Middle, High): Adjust sensitivity based on shooting distance:
    • Low: 3-4 meters
    • Middle: 7-8 meters
    • High: 12-15 meters
  • Motion Test: Use this function to verify PIR sensor operation. If the PIR trigger number increases when moving in front of the lens, it's working correctly.
  • Fill Light Distance (Near, Middle, Far): Adjust for optimal night vision illumination:
    • Low: 3-4 meters
    • Middle: 7-8 meters
    • High: 12-15 meters
  • Camera Name (ON/OFF): Set a custom name (number or letter) to be displayed on photos/videos.
  • Date & Time: Manually set or sync time via the app.
  • Date Format: Choose D/M/Y, M/D/Y, or Y/M/D.
  • Time Format: Choose 24H or 12H.
  • Loop Record (ON/OFF): If ON, new files overwrite old ones when the SD card is full. If OFF, recording stops when the card is full.
  • Memory Card Format: Deletes all files on the SD card.
  • Language: Select from English, Deutsch, Français, Español, Nederlands, Italiano, Polski, 简体中文, 한국어, 日本語, Русский.
  • Password Protection (Off/ON): Set a 4-digit camera password. If forgotten, press and hold the "^" key + "OK" key simultaneously, then turn the switch to SETUP.
  • Factory Reset: Restore camera to default settings.

9. Maintenance

  • SD Card Care: Regularly format your SD card to maintain optimal performance and prevent data corruption.
  • Battery Management: Ensure the solar panel is exposed to adequate sunlight for charging. If using AA batteries, replace them when low to prevent recording interruptions.
  • Cleaning: Gently clean the camera lens and PIR sensor with a soft, dry cloth to ensure clear images and accurate detection.
  • Storage: When not in use, store the camera in a dry place. If condensation appears inside the lens (due to temperature differences), leave the camera in a dry place for 1-2 days to allow it to dissipate.

10. Troubleshooting

Q1: Can't connect to home Wi-Fi router

The Wi-Fi trail camera connects directly to your phone via the TrailCam Go app, creating its own Wi-Fi hotspot. It is not designed to connect to your home network for internet access.

Q2: Camera not found on App or not connected

  • Get as close to the camera as possible (within 45ft due to Bluetooth limitations).
  • Ensure no numerous electronic products are interfering nearby.
  • Verify the camera is turned ON (TEST or ON position).
  • Make sure the camera battery level is sufficient.
  • Ensure both Bluetooth and Wi-Fi are enabled on your phone.

Q3: Why did the camera stop connecting after it was just connected?

  • Leaving the app for over 2 minutes can cause disconnection.
  • Visiting other apps that require cellular connection or clicking a "Map" option within the camera interface can disconnect the Wi-Fi signal, as your phone switches to cellular data.

Q4: Cannot take photos or videos

  • Ensure a TF card is properly inserted into the card slot.
  • Check if the TF card is corrupt; try formatting it or using a different card.
  • Low battery power can prevent the camera from operating.

Q5: The photo is too dark at night

  • The illumination parameter might not be set correctly. Adjust the "Fill Light Distance" setting.
  • Lack of reflective background: Position the camera in an area with a backdrop to reflect maximum light. For instance, place the camera 8-12m (20-30ft) from a field edge facing the woods.
  • Low battery power can affect night vision performance.

Q6: The camera shuts down automatically in TEST mode

The camera is designed to shut down automatically if there is no operation for over 3 minutes in TEST mode. This feature prevents battery drain.

Q7: Camera LED light area appears water mist?

This is typically due to condensation inside the lens caused by temperature differences. Leave the camera in a dry place for 1-2 days to resolve this.

Q8: How do I change the language of the camera back to English?

In TEST mode, press MENU, then navigate to the fourth-to-last button in the menu to change the language.

Q9: Apple computer cannot read video files

Video files are in AVI format, which may not be compatible with Apple computers. Try using a different video player.

Q10: Three ways to get an image

  • Check photos directly on the TrailCam Go App.
  • Connect the camera to a computer via USB cable. The camera will appear as a USB flash drive, allowing you to access photos and videos.
  • Remove the SD card, insert it into a card reader, and connect the reader to a computer to view files.

Q11: No photos were taken in motion detection

  • Ensure all protective film is removed from the camera lens.
  • Maintain a distance of at least 35 meters (115 ft) from the camera to the target area.
  • In the menu, select "Mode" > "Motion Detection", then set the detection delay time to a few seconds.

11. Specifications

A table detailing the product parameters, including model (PR903), app support, photo/video resolution, trigger time, infrared distance, night vision, lens distance, waterproof rating, solar panel with 5000mAh battery, screen size, power supply (8 AA batteries), memory (up to 128GB TF card), standby time, operating mode, and operating temperature.

Product parameters and specifications.

Feature Specification
Model Number PR903W
Screen Size 2.0''
Photo Resolution 60/48/42/36/32/28/24/20/14/9MP
Video Resolution 8K/4K/2.7K/1080P/720P
Trigger Time 0.2~0.5S
Infrared Distance 15-20M
Power Supply Solar panel + 5200mAh lithium battery + 8 AA battery
Memory Up to 128GB SD card (Minimum 4GB TF card)
Waterproof Rating IP66
Operating Temperature -20°C to +60°C
Stand-by Time 12 months
Lens Distance 120°
Operating Mode Photo/Video (with audio, no external)

12. User Tips

  • Image Quality: While the camera offers high resolutions like 60MP and 8K, be aware that some of the highest resolutions might involve interpolation. Adjust settings to find the best balance for your specific needs.
  • Wi-Fi Connectivity: Remember that the camera's Wi-Fi creates a direct hotspot for your phone and does not connect to your home internet. This is by design for convenient local access to media.
  • Solar Panel Performance: The integrated solar panel works effectively. For optimal charging, try to position the camera where the solar panel receives maximum sunlight throughout the day.
  • PIR Sensitivity: If you experience false triggers from environmental factors like tree movement, adjust the PIR sensitivity to a lower setting (Medium or Low) to reduce unwanted recordings. If the camera stops recording intermittently, check PIR sensitivity and ensure consistent power.
  • Battery & SD Card: Always ensure you have a compatible SD card and sufficient power (either from the solar battery or fresh AA batteries) for uninterrupted operation.

13. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.

Made in China

FCC, CE, UKCA, and Recycle logos

Compliance with FCC, CE, UKCA standards. Please recycle responsibly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.