1. Product Overview
This product is an OEM (Original Equipment Manufacturer) replacement LCD display and touch screen digitizer assembly designed specifically for the Microsoft Surface Pro 3, model number 1631. It is a complete panel LCD combo with a capacitive screen, intended to replace a damaged or non-functional original screen.
Figure 1: Front and back view of the LCD Display and Touch Screen Digitizer Assembly.
2. Specifications
| Feature | Detail |
|---|---|
| Brand Name | DALESIMEI |
| Compatible Brand | For Microsoft Surface |
| Model Number | For Microsoft Surface Pro 3 |
| Product Type | Panel LCD Combo |
| Screen Type | Capacitive Screen |
| Display Size | 10~13 Inch |
| Color | Black |
| Quality Control (QC) | TEST OK |
| Package Dimensions (L x W x H) | 36 cm x 26 cm x 6 cm |
| Package Weight | 0.85 kg |
3. Installation Guide
This section provides detailed instructions for replacing the LCD screen and digitizer assembly on your Microsoft Surface Pro 3 (Model 1631). Please read all steps carefully before beginning the installation. If you are inexperienced, it is highly recommended to seek professional repair service.
3.1. Preparation Tools & Materials
- Precision screwdriver set
- Plastic pry tools / triangle picks (non-metallic)
- Suction cup
- Heat gun or hair dryer
- Anti-static wristband or gloves
- Tweezers
- Tablet screen assembly compatible with your model (this product)
- Screen adhesive: B7000 / T7000 glue
- Cleaning cloth and isopropyl alcohol
- Clamps or heavy objects for curing
3.2. Pre-Operation Steps
- Power off the tablet completely.
- Remove SIM tray or SD card if present.
- Lay a soft cloth on the workspace to avoid scratching the back cover.
- Keep screws organized and take photos for reference during disassembly.
3.3. Removing the Old Screen
- Heat the edges: Use a heat gun or hair dryer at low to medium heat (around 60-80°C) to warm all four sides of the screen. This softens the adhesive.
- Lift the screen: Attach a suction cup near one corner. Gently pull to create a small gap. Insert a plastic pry tool and slowly slide along the edge to separate the screen. Do not insert the tool too deeply to avoid damaging cables.
- Open the screen carefully: Lift the screen at a small angle (≤ 30°). Do not pull abruptly.
- Disconnect cables: Locate the display cable, touch cable, and any other connectors. Use a pry tool to flip up the retaining clips and gently unplug the cables. If required, disconnect the battery cable first to avoid short circuits.
- Remove the old screen completely.
Figure 2: Rear view of the LCD assembly, showing flex cable routing.
Figure 3: Close-up of flex cable connectors for careful handling.
3.4. Installing the New Screen
- TEST BEFORE INSTALLATION (CRITICAL): Connect the new screen's cables to the motherboard. Power on the tablet to test the following functions:
- Display functionality
- Touch function responsiveness
- Brightness adjustment
- Color accuracy
- Front camera (if applicable and integrated with the screen assembly)
- Disconnect the screen again after successful testing.
- Clean the frame residue with isopropyl alcohol and a cleaning cloth. Ensure the surface is free of old adhesive.
- Apply new adhesive evenly around the frame where the screen will sit.
- Reconnect the screen cables properly and secure the connectors.
- Place the new screen into position and press gently around the edges to ensure adhesion.
- Use clamps or heavy objects to hold the screen firmly. Let it cure for 1-2 hours according to the adhesive instructions.
3.5. Final Check
- Remove clamps and clean any excess glue.
- Reinstall all screws and components that were removed during disassembly.
- Power on and fully test all functions of the tablet.
- Do not bend or press hard on the screen for 24 hours to allow full curing of the adhesive.
3.6. Important Warnings
- Use only a matching screen assembly for your tablet model (Microsoft Surface Pro 3, Model 1631).
- Avoid overheating the battery during the heating process.
- Do not use 502 glue or other corrosive adhesives, as they can damage the screen or tablet components.
- If you are inexperienced, seek professional repair service.
- Working on curved, folding, or highly integrated tablets carries significant risk of damage.
4. Operating the New Screen
Once successfully installed, the new LCD display and touch screen digitizer assembly will function as the original screen of your Microsoft Surface Pro 3. All display and touch functionalities will be restored. No special operating procedures are required beyond the standard use of your tablet.
Ensure that the display shows clear images, colors are accurate, and the touch response is precise across the entire screen surface. Test multi-touch gestures and stylus input if applicable to your device.
5. Maintenance
To ensure the longevity and optimal performance of your new screen assembly, follow these maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen-specific cleaning solution. For stubborn smudges, a small amount of isopropyl alcohol on a cleaning cloth can be used. Avoid harsh chemicals or abrasive materials.
- Protection: Consider using a screen protector and a protective case for your tablet to prevent scratches, cracks, and impacts.
- Temperature: Avoid exposing the tablet to extreme temperatures, both hot and cold, as this can affect screen performance and adhesive integrity.
- Pressure: Do not apply excessive pressure to the screen, especially when cleaning or carrying the tablet.
6. Troubleshooting
If you encounter issues after installation, refer to the following troubleshooting steps:
- No Display or Touch Response:
- Power off the tablet and carefully re-open it.
- Check all flex cable connections (display, touch, etc.) to ensure they are securely seated and their retaining clips are locked.
- Ensure the battery is properly connected.
- Perform the 'TEST BEFORE INSTALLATION' steps again.
- Uneven Adhesion / Screen Lifting:
- Ensure the old adhesive residue was completely removed before applying new glue.
- Verify that enough new adhesive was applied evenly.
- Reapply clamps or heavy objects and allow for a longer curing time (e.g., 24 hours).
- Dead Pixels or Display Anomalies:
- If these issues were present during the initial test, the screen might be faulty. Contact the seller for support.
- If they appeared after installation, recheck cable connections.
- Touch Inaccuracy:
- Ensure the screen is clean and free of debris.
- Check for any physical damage or pressure points on the screen.
- Verify cable connections.
7. User Tips
- Patience is Key: Screen replacement requires careful and patient work. Rushing can lead to damage.
- Organize Components: Keep track of all screws and small parts, perhaps using a magnetic mat or labeled containers.
- Static Prevention: Always use an anti-static wristband or gloves to prevent damage to sensitive electronic components.
- Gentle Handling: Flex cables and connectors are delicate. Handle them with care using appropriate tools like tweezers.
- Thorough Testing: The pre-installation test is crucial. Do not skip it, as it can save significant time and effort if the screen is faulty or connections are incorrect.
8. Support and Additional Resources
For further assistance or if you encounter issues not covered in this manual, please contact the seller or a qualified repair technician.
An official user manual in PDF format may be available for more detailed diagrams or specific instructions: