Introduction
Thank you for purchasing a ZOOM Q2n-4K Handy Video Recorder. This manual provides detailed instructions for the setup, operation, and maintenance of your device.
Key Features:
- Capture the immediacy of live performances in both audio and video: Equipped with a wide-angle lens and an XY format condenser mic, it records video even when close to the subject, capturing clear stereo images at high resolutions up to 24-bit/96 kHz.
- Record fine video details: 4K resolution captures images four times as detailed as full HD, maintaining clarity even when changing viewing angles.
- Capture extreme lighting changes beautifully: High Dynamic Range (HDR) technologies enable video recording of live performances with extreme lighting changes, preventing undersaturation and oversaturation.
- Scene settings for a wide range of filming conditions: Includes settings for live performances, monochrome, sepia, and a flat setting for color matching.
- Easy live streaming: Connects to a computer for use as a web camera, facilitating high-quality live streaming.
Names of Parts
Familiarize yourself with the different components of your Q2n-4K recorder.
Front View
Description: The front of the Q2n-4K features the main lens, the built-in XY stereo microphones (covered by a grille), and a REC LED indicator. The lens is a 150° wide lens with F2.8/15.2mm specifications.
Back View
Description: The back of the Q2n-4K features the LCD display, function buttons on either side of the display, and the POWER/PLAY, REC, and SETTING/EXIT buttons below the screen. The screen shows video, recording status, and various settings.
Side Views
Description: The right side of the Q2n-4K includes the output volume control, headphone jack, and external input jack (EXT IN).
Description: The left side of the Q2n-4K features the input volume dial, USB (Micro-B) port, Micro HDMI connector, and a strap hole.
Bottom View
The bottom of the Q2n-4K has the battery/SD card compartment cover and tripod mounting threads.
Setup
1. Supplying Power
The Q2n-4K can be powered by AA batteries or an optional AC adapter.
Using Batteries:
- Open the battery/card compartment cover located on the bottom of the unit.
- Insert two AA batteries (alkaline, NiMH, or lithium) into the compartment, ensuring correct polarity.
- Close the battery/card compartment cover.
Note: Use only one type of battery at a time. After installation, set the correct battery type in the settings menu (see "Setting the type of battery used").
Using an AC Adapter (ZOOM AD-17, sold separately):
- Connect the cable of an AD-17 AC adapter to the USB (Micro-B) port on the left side of the Q2n-4K.
- Plug the AC adapter into an electrical outlet.
Hint: When connected to a computer via USB, power can also be supplied through the USB connection.
2. Inserting microSD Cards
The Q2n-4K records to microSD cards (up to 256 GB). A Class 10 or higher card is required; for 4K recording, use a UHS Speed Class 3 or higher microSD card.
- Open the battery/card compartment cover.
- Insert the microSD card into the card slot with the top side up until it clicks into place.
- Close the battery/card compartment cover.
Note: Always ensure the power is off when inserting or removing a microSD card to prevent data loss. New microSD cards should be formatted using the Q2n-4K for optimal performance (see "Formatting microSD Cards").
3. Turning the Power On/Off
- To turn on: Press and hold the POWER/PLAY button. The REC LED will light green, and the Recording Screen will appear.
- To turn off: Keep pressing the POWER/PLAY button until "Goodbye See You!" appears on the display.
4. Initial Setup (Language, Date and Time)
The first time you turn on the Q2n-4K, you will need to set the display language and the date and time.
Setting the Language:
- Use the < and > function buttons to select your desired language (e.g., English).
- Press the REC button to confirm.
Setting the Date and Time:
- Press the function buttons corresponding to Month, Day, Hour, Min, and Year to adjust each item.
- Press the REC button to confirm.
Note: If power is not supplied for a long time, date and time settings may reset.
5. Battery Settings
To ensure accurate battery level display and optimize power usage:
Setting the Battery Type:
- From the Recording Screen, press the SETTING/EXIT button.
- Press the > button three times to navigate to the Battery Type setting.
- Press the function button corresponding to "Battery Type" and select Alkaline, Ni-MH, or Lithium.
- Press the SETTING/EXIT button to return to the Recording Screen.
Enabling Energy Saving (Display Backlight Time, Auto Power Off):
You can save power by adjusting how long the display backlight stays lit and enabling auto power off.
- From the Recording Screen, press the SETTING/EXIT button.
- Press the > button three times to navigate to the Power Save and Auto Power Off settings.
- For "Power Save", select the time until the backlight dims (e.g., 1 min, 3 min, 5 min, or Off).
- For "Auto Power Off", select the time after which the unit will automatically turn off if unused (e.g., 1 min, 3 min, 5 min, or Off). This function is disabled during recording/playback or when powered via USB.
- Press the SETTING/EXIT button to return to the Recording Screen.
6. Formatting microSD Cards
Formatting a microSD card prepares it for use with the Q2n-4K and can improve performance. This will erase all data on the card.
- From the Recording Screen, press the SETTING/EXIT button.
- Press the > button twice to navigate to the SD Format setting.
- Press the function button corresponding to "SD Format".
- On the confirmation screen, select "Yes" and press the REC button.
- "Done" will appear when formatting is complete.
7. Updating the Firmware
Keep your Q2n-4K up-to-date with the latest firmware versions from zoomcorp.com.
- Install new batteries or connect an AC adapter (firmware update is not possible if battery power is low).
- Copy the firmware update file to the root directory of a microSD card.
- Insert the microSD card into the Q2n-4K.
- While pressing the REC button, press the POWER/PLAY button to turn the power on.
- An update confirmation screen will appear. Select "Yes" and press the REC button.
- After updating completes, a notification screen appears. Press and hold the POWER/PLAY button to turn the power off.
Note: Do not turn off the power during a firmware update.
Operating Instructions
1. Recording Video
Recording Screen Overview:
When the power is turned on, the Recording Screen displays key information:
- Top Left: Video setting (e.g., 4K-30 VIDEO)
- Top Center: Recording time / Available recording time
- Top Right: Remaining battery charge, LO CUT setting
- Left Side: FOV setting, SCENE setting
- Right Side: AUDIO setting, AUTO GAIN setting
- Bottom: Level meters and Peak indicators
Making Video Recording Settings:
Use the function buttons on both sides of the display to change settings.
- Video Quality: Press the VIDEO function button to select resolution and frame rate (e.g., 4K-30 VIDEO, 1080-60 SMOOTH, 720-30 VIDEO).
- Field of View (FOV): Press the FOV function button to select WIDE, 0, or TELE. WIDE broadens the view, TELE narrows it.
- Scene Type: Press the SCENE function button to select a scene optimized for conditions (e.g., AUTO, OUTDOOR, NIGHT, CONCERT LIGHT, JAZZ CLUB, DANCE CLUB, MONOCHROME, SEPIA, FILM, X-PROCESS, FLAT).
- Low-Frequency Noise Reduction (LO CUT): Press the LO CUT function button to set the low-cut filter (OFF, 80 Hz, 120 Hz, 160 Hz) to reduce wind noise or vocal pops.
- Audio Quality: Press the AUDIO function button to set the sampling frequency and bit rate (e.g., 44.1 kHz/16-bit, 48 kHz/24-bit, 96 kHz/24-bit).
Adjusting Recording Levels:
- Manually: Turn the input volume dial on the left side of the unit. Adjust so that the level meters are around -12 dB with the loudest sounds. Peak indicators will light and the REC LED will blink if sounds are too loud, indicating potential distortion.
- Automatically (Auto Gain): Press the AUTO GAIN function button to select an automatic gain adjustment setting (OFF, CONCERT, SOLO, MEETING).
Connecting External Input Devices:
You can capture audio from an external mic or audio device via the external input jack (EXT IN) on the right side. The built-in mics are disabled when an external device is connected.
Starting/Stopping Recording:
- To start: Press the REC button. The REC LED on the front will light red.
- To stop: Press the REC button again.
Note: When recording for long periods, files may be split (after 4 GB for microSDHC, continuous for microSDXC). If the unit overheats, a warning message will appear, and it will turn off automatically.
2. Playing Recordings
Playback Screen Overview:
From the Recording Screen, press the POWER/PLAY button to open the Playback Screen. It shows the status indicator (Playing, Paused, Stopped), remaining playback time, file name, level meters, peak indicators, and a progress bar.
Playback Operations:
- Start Playback: Press the POWER/PLAY button. Playback of the last recorded or most recently played file will begin.
- Pause/Resume: Press the POWER/PLAY button during playback.
- Search Forward/Backward: Press and hold the >> or << function buttons.
- Move to Next/Previous File: Press the > or < function buttons.
- Continuous Playback: In the settings menu, enable "Play All" under "Play Mode" to play files continuously without stopping.
- Stop Playback: Press the SETTING/EXIT button to stop playback and return to the Recording Screen.
Adjusting Output Volume:
Use the output volume control on the right side of the unit to adjust the volume for the speaker and headphones (0-30).
Headphone/Line Output:
Connect headphones or audio equipment to the headphone jack using a stereo mini plug cable to monitor sound.
Viewing on an HDMI-Compatible TV:
- Connect an HDMI cable (not included) from the Micro HDMI connector on the Q2n-4K to an HDMI-compatible TV.
- Press the POWER/PLAY button to play the video and audio. The recorder's display will turn off, and the file will play on the TV screen.
Note: During TV output, file information cannot be shown or deleted. Some TVs may not support all audio formats.
3. Managing Files
Checking File Information:
- From the Playback Screen, press the function button corresponding to the "i" icon.
- Information about duration, size, date, time, video, and audio will be displayed.
- Press the "i" icon again to close the information screen.
Deleting Files:
- From the Playback Screen, press the function button corresponding to the trash can icon.
- Use the < and > buttons to select the file(s) you wish to delete. A checkmark will appear.
- Press the trash can icon again.
- On the confirmation screen, select "Yes" and press the REC button to delete. Select "No" to cancel.
4. Using USB Functions (Webcam, Card Reader, USB Mic)
Connect the Q2n-4K to a computer or iOS device using a USB cable to utilize its various USB functions.
- From the Recording Screen, press the SETTING/EXIT button.
- Press the > button to navigate to the USB Connection Setting Screen.
- Select the desired function (WEBCAM, CARD READER, USB MIC) using the function buttons.
- On the confirmation screen, select "Yes" and press the REC button.
- Connect a USB cable from the Q2n-4K to your computer or iOS device.
Note: Webcam use is not possible with an iOS device. When connected to an iOS device, use batteries as power cannot be supplied via USB. An iPad Camera Connection Kit or Lightning to USB Camera Adapter (not included) is necessary for iOS devices.
Enabling Direct Monitoring (USB Mic):
When using the Q2n-4K as a USB mic, you can monitor the input sound directly.
- During USB mic use, press the function button corresponding to "DIRECT MNTR" to toggle direct monitoring ON/OFF.
5. Setting the Standard Frame Rate
Set the standard recording frame rate according to your regional video format (NTSC or PAL).
- From the Recording Screen, press the SETTING/EXIT button.
- Press the > button twice to navigate to the NTSC/PAL setting.
- Press the function button corresponding to "NTSC/PAL" and select NTSC (30 FPS) or PAL (25 FPS).
- Press the SETTING/EXIT button to return to the Recording Screen.
6. Setting the Volume of the Operation Sound
Adjust the volume of the Q2n-4K's operation sounds.
- From the Recording Screen, press the SETTING/EXIT button.
- Press the > button to navigate to the Beep setting.
- Press the function button corresponding to "Beep" and select the desired volume level (e.g., no sound, low volume, high volume).
- Press the SETTING/EXIT button to return to the Recording Screen.
7. Using Mics that Support Plug-in Power
Enable plug-in power for compatible external microphones.
- From the Recording Screen, press the SETTING/EXIT button.
- Press the > button to navigate to the Plug-in Power setting.
- Press the function button corresponding to "Plug-in Power" and set it to "On".
- Press the SETTING/EXIT button to return to the Recording Screen.
Maintenance
To ensure the longevity and optimal performance of your Zoom Q2n-4K, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. For the lens, use a lens cleaning cloth and solution designed for optical surfaces. Avoid using abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for an extended period, remove the batteries to prevent leakage.
- Handling: Handle the Q2n-4K with care. Avoid dropping it or subjecting it to strong impacts. Protect the lens and microphones from dust and debris.
Troubleshooting
If you encounter issues with your Q2n-4K, refer to the following common problems and solutions.
Warning Messages During Startup:
| Message | Explanation and Response |
|---|---|
| Date and Time were Reset | The date and time settings were initialized. Reset the time (see "Setting the date and time"). |
| File recovery failed. | Data recording was not completed properly, so the unit tried to recover it but recovery failed. |
Warning Messages When Using Batteries:
| Message | Explanation and Response |
|---|---|
| Low Battery! | The remaining battery charge has become low. Replace the batteries with new ones. |
Warning Messages When the Recording Screen is Open:
| Message | Explanation and Response |
|---|---|
| No SD Card! | No microSD card is loaded. Load a microSD card. |
| Low Speed Card! | Recording stopped because the writing speed to the microSD card was insufficient. Use a microSD card that has been formatted by the Q2n-4K and confirmed to work with it. Check the ZOOM website for compatible cards. |
| Card Full! | The microSD became full. Delete unneeded data or replace it with a new microSD card. |
| Too Hot! Shutting down. | The power will turn off because the temperature inside the unit has become high. Wait for the temperature to decrease before using it again. |
Warning Messages When the Playback Screen is Open:
| Message | Explanation and Response |
|---|---|
| Invalid File! | The file is invalid. Files cannot be played if they were not created by the Q2n-4K or they are invalid because recording did not stop properly. |
| Pickup Full! | The number of files with check marks for deletion exceeded the maximum (999). Reduce the number of checks. |
| Read Only! | The file is protected so it could not be deleted. Check the file characteristics on a computer. |
Recording/Playback Trouble:
- Unit becomes warm: This is normal operation and not a malfunction.
- No sound or very quiet sound: Check connections, volume settings, and recording levels. If using an external device, ensure its output level is sufficient.
- Recording audio/video not possible: Check remaining recordable time on the Recording Screen.
- "Low Speed Card!" warning or long stop times: MicroSD cards can wear out. Formatting the card may help. If not, replace the card with a compatible one (check zoomcorp.com).
Specifications
| Feature | Specification |
|---|---|
| Image sensor | 1/2.3" 16 M-pixel CMOS sensor |
| Lens | F 2.8, 150° FOV |
| Video format | MPEG-4 AVC/H.264 (MOV) |
| Video resolutions | 4K: 30 p, 25 p, 24 p 1080: 60 p, 50 p, 30 p, 25 p, 24 p 720: 30 p, 25 p |
| Audio formats | WAV: 96 kHz/24-bit, 48 kHz/24-bit, 44.1 kHz/16-bit |
| Audio functions | LO CUT: OFF, 80 Hz, 120 Hz, 160 Hz AUTO GAIN: OFF, CONCERT, SOLO, MEETING DELAY: 0.0 F, 0.5 F–10.0 F (webcam use only) DIRECT MONITOR ON/OFF (USB mic use only) |
| Image functions | FOV: WIDE, 0, TELE (5 steps) SCENE: AUTO, OUTDOOR, SUNSET, NIGHT, CONCERT LIGHT, JAZZ CLUB, DANCE CLUB, MONOCHROME, SEPIA, FILM, X-PROCESS, FLAT |
| Display | 1.77" full-color LCD (160 x 128) |
| Audio inputs | Mic: Fixed 120° XY stereo mic, Max sound pressure: 120 dBSPL, Input gain: -∞ dB – +39 dB Line: Input connector: stereo mini jack (supports plug-in power), Input gain: -∞ dB – +39 dB, 2 kΩ or higher input impedance, Plug-in power (2.5 V) supported |
| Output connector | Combined headphone/line stereo mini jack HDMI micro Type D |
| Built-in speaker | 300 mW 8 Ω mono speaker |
| Recording media | microSD/microSDHC/microSDXC (256 GB maximum) |
| USB | micro USB (supports data transfer, USB bus power) WEBCAM: UVC 1.0 + UAC 1.0, 720 p WVGA video, 48 kHz/16-bit audio CARD READER: USB Mass Storage USB MIC: UAC 1.0, 44.1 kHz/16-bit (card reader and USB mic functions support iOS devices) |
| Power | 2 AA batteries: alkaline LR6 (1.5 V), nickel metal hydride HR6 (1.2 V) or lithium FR6 (1.5 V) AC adapter (ZOOM AD-17): DC 5 V/1 A (USB bus power supported) |
| Estimated continuous recording time using batteries | Video resolution: 720/30 p: Alkaline LR6 (1.5 V) 2.0 hours, Ni-MH HR6 (1.2 V) 3.0 hours, Lithium FR6 (1.5 V) 6.0 hours 1080/30 p: Alkaline LR6 (1.5 V) 1.2 hours, Ni-MH HR6 (1.2 V) 2.0 hours, Lithium FR6 (1.5 V) 4.0 hours 4K/30 p: Alkaline LR6 (1.5 V) 0.5 hours, Ni-MH HR6 (1.2 V) 1.0 hours, Lithium FR6 (1.5 V) 2.0 hours Audio quality: 48 kHz/24-bit (approximate values, actual times vary) |
| External dimensions | 58.7 mm (D) x 68.5 mm (W) x 83.0 mm (H) |
| Weight (including batteries) | 170 g |
User Tips
- Power and Storage Essentials: The Q2n-4K does not include an AC adapter or built-in battery. It operates on two AA batteries (alkaline, NiMH, or lithium) or an optional ZOOM AD-17 AC adapter. MicroSD cards (up to 256 GB) are required for recording but are not included with the device. Ensure you have these items for immediate use.
- Optimal 4K Recording: For best performance when recording in 4K, always use a microSD card that is UHS Speed Class 3 or higher.
- Preventing Overheating: If recording for extended periods, especially in warm environments, monitor the device for overheating warnings. If a warning appears, stop recording and allow the unit to cool down to prevent automatic shutdown.
- Firmware Updates: Regularly check zoomcorp.com for the latest firmware updates to ensure your device has the newest features and bug fixes.
Warranty and Support
For warranty information, technical support, or service, please refer to the official ZOOM Corporation website or contact their customer service department. Keep your proof of purchase for any warranty claims.
You can also find the complete user manual in PDF format for detailed reference: ZOOM Q2n-4K Operation Manual (PDF)